Fender Roller Nut LSR

148

Roller NutThe LSR reduces friction of the saddle, thus preventing tuning fluctuations.

  • Diameter from .008 to .056
  • Width: 43 mm
  • Installation Guide and accessories included
  • Only right-handed guitars
numărul articolului 124298
unitate de vânzare 1 bucată(ăţi)
Unmachined No
Instrument ST-Style
266 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Vineri, 26.04.
1

148 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

77 Recenzii

AP
complicat de montat
Andrei Paunescu 26.03.2020
Ar fi utila o varianta mai simplu de montat, fara atatea modificari ireversibile ale chitarei
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
J
Rock'n'rollerball nut
Jacques271 01.04.2015
The incontestable winner in the harsh nut game (vibrato category).
Expensive but its excellent quality justifies it.
Useful fitting accessories.
Contrary to some user's advices, the installation of this technological marvel
is rather easy (if you are cautious and skilled enough) because you don't have to worry about the notches. I customized one Stratocaster and one Les Paul (w-Bigsby) with this nut.
The result is bluffing: perfect alignment, frictionless action, discrete but great look.
This roller nut permits you to engage safely in the most aggressive post-Hendrixian vibrato playing.
Măiestrie
9
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Most efficient upgrade for a strat nut
Mateii 25.09.2019
Installing it requires some permanent modification of the fretboard BUT the versatility that this nut brings to a guitar (ability of using different string gauges without having to change the nut) along with the fact that it is a similar material to the frets and the saddles makes it worth the effort.

The fact that you have to enlarge the nut channel towards the bridge end makes this mod quite permanent.

Pros:
- Changing string gauges without requiring a new nut job
- Frets, nut, and bridge saddles all made of the same material, less tone difference between open notes and fretted notes

Cons:
- Requires modification of the nut slot in a very hard to undo way
Măiestrie
4
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Keeps the guitar in tune.
Håkan Å. 23.11.2014
I have an old Charvel San Dimas that had a metal nut (no rollers though). The tuning pegs are a bit off menaning that the strings have a slight angle sideways over the nut. This cretaed some tuning problems, especially when using the tremolo bar. I installed the LSR roller nut instead and all problems with keeping in tune and squirky noises were gone. I can even dive bomb with the tremolo bar and the guitar stays in tune. No tone loss either.
Măiestrie
5
0
semnaleaza un abuz

semnaleaza un abuz