Behringer PS400

288

Phantom power adapter

  • Selectable +12 / +48 V phantom power voltage
  • Suitable for all condenser microphones
  • XLR Female input (mic input) and XLR male output (mic thru)
  • Very low-noise sound
  • Including 12 Volt DC power adapter
disponibil din Martie 2006
numărul articolului 191611
unitate de vânzare 1 bucată(ăţi)
Phantom Power Adapter and Feed Units No
Phantom Power Adapter No
Phantom power Yes
144 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Luni, 13.05. și Marţi, 14.05.
1

288 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

106 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
PS400 Phantomsupply: .....
MicroSoundLiker 14.04.2019
Just recently bought the PS400 for supplying phantom voltage to various condensor microphones. In brief: rugid built, however not meeting decent electrical specifications.
- Output voltage (unloaded) equals 12V in 12V-mode, but only 31V in 48V-mode, i.e. much too low! A short check of the internal electronic circuits shows a multi-diode trippler, thus limiting the output to 3x the input voltage, i.e. 36V max. It never will/can reach 48V, as claimed!
- The output voltage STRONGLY depends on microphone current drawing! E.g. in 12V-mode the voltage drops from its unloaded 12.0V to 10.4V (at 5 mA) and 8.5V (at 10mA).
But much more serious in 48V-mode: from 31V (unl.) to 22V (at 0.7 mA) and 12.5V (at 2 mA)! Note that common microphones typ. require 2-5 mA at 48V!
- Noise level is OK, both at 12V (adapter) as well as 9V (battery); at 9V unloaded output voltage is just 9V or 25V (select switch 12V- or 48V-mode).
Fazit: at "48V" setting the unit can not be used. Likely many people will be affected by this deficit, without knowing.
Măiestrie
7
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
SK
Great Purchase
Shauna K. 06.07.2015
I bought this cheap little behringer device to provide phantom power to my condensor mic so that I would be able to use it in a live situation. Based on all the reviews I read I decided that the Behringer Ps400 would be more than adept to doing this for me. At first I thought that it wasn't working at all but once I realised that there was two options for voltage I soon sorted that problem. It has been a really good purchase for me and I now use it on a weekly basis whilst gigging. It is a very tidy and sturdy unit that has been bumped and dropped on numerous occasions and still works fine.
A really good purchase and major thanks to Thomann for providing me with a free travel adaptor too!
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Excellent Unit
AnthonyO 07.11.2019
I use this to power a mic that needs phantom power, I use a mixer that does not suppl this and this unit works great,
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Good
Anonim 07.01.2017
I use it on stage for my saxophone mic(Akg C519).Because some mixers haven't phantom power.It's very good quality,i like it.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

YouTube pe acerst subiect