Doepfer A-106-1 Xtreme Filter (MS20)

23

Filtre passe haut et bas Xtreme

  • Clone du filtre MS20
  • Largeur: 14HP (70,8 mm)
  • Profondeur: 40 mm (du panneau arrière au panneau avant)
  • Courant: +30 mA (+12V) / -20 mA (-12V)
Référencé depuis Juin 2005
Numéro d'article 178322
Conditionnement (UVC) 1 Pièce(s)
Largeur 14 TE / HP
115 €
Envoi gratuit et TVA incluse.
Disponible immédiatement
Disponible immédiatement

Cet article est disponible en stock et peut être envoyé immédiatement.

Informations sur l'expédition
Expédition estimée le Vendredi, 3.05.
1

23 Évaluations des clients

4.7 / 5

Vous devez être connecté afin de pouvoir évaluer un produit.

Note: Afin d’éviter que les évaluations de notre site soient polluées par des “ouï.dire”, des approximations ou encore de la publicité clandestine, nous autorisons uniquement nos clients à évaluer les produits achetés chez nous.

Une fois connecté, vous trouverez dans votre compte client, via le lien "Évaluer des produits", tous les articles que vous pouvez évaluer.

Utilisation

Caractéristiques

Son

Qualité de fabrication

13 Commentaires

google translate de
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
A
Dirty, dirty
Anonyme 09.10.2014
ein cooler Brachialofilter, auch Gitarren und Drums sind damit sehr schön zu entstellen. allerdings muss man bei der Bedienung schon ein wenig nachdenken, die Funktionen sind nicht auf anhieb klar, man kann aber, wenn man das Teil verstanden hat, sehr lässige routings machen.
1
0
Signaler l'évaluation

Signaler l'évaluation

google translate de
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
h
Super Filter!
hno1080p 22.12.2017
Top Qualität, super Klang -> eben Doepfer.
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
MQ
Not a straight MS20 clone - but awesome none the less
Martyn Q. 01.10.2015
I'll start by saying - this is *NOT* A STRAIGHT MS20 CLONE. To actually emulate the MS20 filter section you would need two of these patched in series - if you are purchasing for that MS20 sound bear that in mind, treat this as a completely different beast.
Now having said what this module isn't, I'll say what it is. Quirky, unusual, gnarly, crazy, raspy, openly-patchable, characterful - the list is endless. This is not a go-to bread and butter filter - take a look at the a106-5 sem filter if thats what you are after - but what it does, it does incredibly well. Balancing the input gain against the resonance and clipping levels can yield some incredible sounds - rasping brasses are a speciality for it. I also love using for drones as the deep lowpass with clipping is great when you patch out the resonance feedback path (I like using a189-1 vc bit mangler and a199 spring reverb on it). The filter responses are adjustable with trimmers on the board which is useful.
You wont find yourself using this on every patch, but it'll add so much to those weird and wonderful distorted sounds that you wont regret the investment.
7
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
J
The great sound of the MS-20 filter for your modular
JohnD 18.06.2013
It's a very characteristic filter that can scream, but can sound quite mellow when tamed. One thing to bear mind is that it can be a bit confusing getting this filter to act like a standard low pass filter. This is because the low pass filter is normalled to the high pass filter i.e the signal goes through the low pass filter to the high pass filter. In principle you can set the high pass to zero (12 o'clock on the polarizer control) and the filter will just act as a standard low pass filter. In practice it is quite hard to hit the zero mark on the high pass filter and you get some of that going into the signal, which can dramatically change the sound of the low pass filter at low frequency settings. The easy way around that is to just put an unconnected jack plug into the high pass in. This will then completely bypass the high pass filter and the filter will act as a conventional low pass filter. That was the most confusing thing I found when trying this filter for the first time. Once you've sussed that out it's a great sounding filter with lots of character.

This filter is a must for anyone with a eurorack modular.
4
1
Signaler l'évaluation

Signaler l'évaluation