Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Button popped out
This is quite a unique adapter, allowing devices attached to the end of a straight stand to be angled. Some might think that using a boom stand renders this redundant but this remains useful for things like adjusting the angle of a stereo bar - a boom arm joint may not be able to hold a loaded stereo bar reliably. I also find this useful for angling a handheld recorder on the end of a short boom pole or selfie stick (with 1/4" fitment adapter).
To fix the orientation of whatever is screwed into the end of the adapter, you have to use the two thumb wheels. This works, but is slightly awkward and I wish there was a better solution.
It is mostly well-made and high quality, most of it is metal. I encountered a problem when the button in the hinge screw popped out - extra caution is probably advised when push-turning the adjustment lever. Thomann were extremely helpful in dealing with this.
To fix the orientation of whatever is screwed into the end of the adapter, you have to use the two thumb wheels. This works, but is slightly awkward and I wish there was a better solution.
It is mostly well-made and high quality, most of it is metal. I encountered a problem when the button in the hinge screw popped out - extra caution is probably advised when push-turning the adjustment lever. Thomann were extremely helpful in dealing with this.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
B
Very handy
I use this all the time. Gives a lot of flexibility. Seems sturdy and good quality.
1
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
L
Love it
I use this all the time on mics when I need something that can give me more flexibility.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
H
ok adapter
bought this one because i had two others from a different manufactorer that did not perform very good. This is a better one, cost more too, but still feels it is a little quirky to get the right angles set and have them stay there with heavy mics. (not that heavy). I use it with the Røde stereobar, and the access to the set screw can be is a bit quirky as mentioned. It might be that it works better if you have someone to help hold the mics in position while setting the correct angle with it.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Useful, but overpriced
I'm using this to mount a Rode SB20 stereo bar to mic stands. Effectively, this means that the stereo bar can be positioned anywhere between zero and 90 degrees in relation to the end of the mic stand - very useful when micing up different sound sources.
It seems pretty well made out of decent quality plastic, and should stand up to regular use without issues. However, I think it is way overpriced for what it is, and have knocked a star off my rating accordingly.
It seems pretty well made out of decent quality plastic, and should stand up to regular use without issues. However, I think it is way overpriced for what it is, and have knocked a star off my rating accordingly.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
P
Good quality, should have been included with the RODE stereo bar
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Really heapy with it!
The Rode Pivot Adapter is great and unique tool.
I have the Rode Stereo Bar SB20 (also a great tool as well!)
and I needed an adapter that can make it more versatile with the angles. The Rode Stereo Bar SB20 is just attach to the boom stand and when it necessary to make not common angel or that the boom is not long or short enough (for example recording acoustic guitar and you need that the Stereo Bar will be in in front of the guitar for XY /AB /ORTF recording) so the Rode Pivot Adapter is a good helper here.
Sure that it fits to and mic adapter!
I have the Rode Stereo Bar SB20 (also a great tool as well!)
and I needed an adapter that can make it more versatile with the angles. The Rode Stereo Bar SB20 is just attach to the boom stand and when it necessary to make not common angel or that the boom is not long or short enough (for example recording acoustic guitar and you need that the Stereo Bar will be in in front of the guitar for XY /AB /ORTF recording) so the Rode Pivot Adapter is a good helper here.
Sure that it fits to and mic adapter!
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
CS
Great wee adaptor!
It lets you spin your mic around. It does it well and is very strong and secure. I bought it for my stereo bar and it works great. Worth the money.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
CN
A must for certain microphones and other options.
These adapters are very useful, well made, and almost a requirement for certain things like stereo bars on boom style stands, since without them the microphones would be at the wrong angle. It is probably not a bad idea to have at least one or two of these laying around to aid in certain tasks in the studio depending on your needs.
0
0
semnaleaza un abuz
