Neutrik NP2 X-B

1538

Jack Plug 6.3 mm

  • Unbalanced
  • Sleek ergonomic design
  • Proven chuck type strain relief for reliable cable retention
  • For cable diameters of 4-7 mm
  • Black shell
  • With gold-plated contacts
disponibil din Iunie 2005
numărul articolului 182705
unitate de vânzare 1 bucată(ăţi)
Installation No
Mono/Stereo Mono
Angled No
Type TS (mono/unsym.)
Plug Jack 6,3 mm TS male straight
20,90 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Miercuri, 19.06. și Joi, 20.06.
1

1538 Evaluările clienților

4.9 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

558 Recenzii

S
Stefandrei 01.06.2024
Cabluri TR --->TR pentru clape, excelent
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
Very good indeed
Scytta 25.02.2020
When one of our bands leads goes wrong, I typically find that the problem is with the plug: either zero or poor quality strain relief for the cable, which permits constant flexing of the wires, so that in the end the wires break through fatigue. Often strain relief consists soley of relatively soft metal 'jaws' being crimped onto the cable. The soldering itself very rarely fails (though it will in the long run if the cable is repeatedly exposed to big temperature changes). I repair all cables these days using Neutrik plugs. Each plug comes with plastic inserts which effectively 'lock' the cable into the plug, and to which the outer shell casing screws. I don't even need to file the metal of the plug contacts to get a good solder joint anymore! Get some of these and look forward to not touching that lead again ...
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
B
I have not tried any better.
BjornIP 13.03.2022
When jacks get stuffed in an old car midwinter, and left there for a couple of days, jacks, and other assets you might have, do corrode. That is not the case here. And I am finally through with my winter problem and music equipment. At least when it comes to jacks.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
EK
Excellent connector. Why should you buy this?
Eylem Kofali 19.07.2022
This was a first project of mine to make my own cables and practice my soldering skills. Smartly designed negative and positive end's angle made it very easy solder them despite I was using an 8 euro worth soldering iron. It was also very straight forward to assemble the parts. The gold tip makes it durable against oxidation in time.

I wish I could've upload a picture of how beautiful, durable and quality cable it became. Look no further for a solid connector bang for the buck.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz