Behringer BC1200

I've installed a set of these on a kit in a church and they definitely do the job in a small to medium environment.
The kick mic is a little boxy with prominent low mids and little top end. It'll need a hefty boost in the upper mids if you want to have a nice click transient.
The 2 overhead mics are very reasonable considering their tiny size. I'll always high-pass these to pick up primarily cymbal and snares. If you're not careful they'll pick up other stage spill too.
The 4 universal drum mics also seem quite prominent in the lower mids, which will need quite a strong eq to compensate but pick up plenty of transients from the drum sticks. When micing up a snare, the top end will need a significant boost unless you add another mic underneath to capture the rattle.
The mic clips are the biggest let down so far. Two have snapped so far within a few months of use with no easy way to replace them. If you need any more you'll have to buy another full set or use a different manufacturer as Behringer don't seem to supply them separately.