Rockboard MOD 2 V2 Midi & USB Patchbay

33

MIDI and USB patch-bay

  • All-in-one patch-bay for pedalboards
  • Suitable for MOD slots in RockBoard pedalboards
  • Compatible with a wide range of other pedal boards
  • Acts as a central access point to the effect setup
  • Establishes clear cable routes to and from the pedal board
  • Removable front panel for mounting on or under pedal boards
  • 4x 6.3 mm TRS thru
  • 2x 5-Pin DIN MIDI thru
  • 1x USB Type A thru
  • 1x DC 2.1 x 5.5 mm hollow plug thru
  • 1x AC IEC thru (male front / female rear)
  • All connections mirrored on the rear side
  • Dimensions with front panel (W x D x H): 175 x 85 x 47 mm
  • Dimensions without front panel (W x D x H): 160 x 85 x 33 mm
  • Weight: 420 g
  • Includes mounting screws, lock nuts and TX wrench

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Nota bene Registra il tuo acquisto presso www.w-distribution.de/en/Warranty per una estensione di garanzia a 4 anni.
In catalogo dal Agosto 2019
Numero di articolo 468507
Unità incluse 1 Pezzo
€ 66
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

33 Valutazioni dei clienti

4.6 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

22 Recensioni

A
Rockboard MOD 2 V2 Midi & USB Patchbay
Andrea72 28.12.2021
Ottimo prodotto, ben costruito e resistente.
Nessun tipo di perdita di segnale nonostante abbia utilizzando tutte le entrate e uscite di linea per far girare il segnale.
Buona fattura delle prese IEC e utilissima la presa dc per alimentare un pedale esterno alla pedaliera tipo un wah wah.
In oltre si possono utilizzare anche pedali MIDI o programmabil tramite USB (TC Electronics ad esempio) utilizzando le prese in dotazione senza dover armeggiare direttamente sui pedali e senza levarli dalla pedaliera.
Consigliatissimo
Qualità
0
0
Segnala un abuso

Segnala un abuso

e
Deludente
edo84 31.08.2020
fa il suo dovere tuttavia la realizzazione è approssimativa. il connettore per l'alimentazione balla già dai primi utilizzi. Da rockboard mi sarei atteso di più.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
JK
Excellent for keeping your pedalboard's I/O organized
Jussi K. 28.01.2023
Great for keeping things tidy and organized if you use 4-cable method and require midi-connectivity. I have the Rockboard Quad 4.2 B and this fits right in. I also managed to fit the Truetone 1 Spot Pro CS12 pedal power under the board after some tetris.

A word of warning: Rockboard's angled "flat" midi cables are not a good fit for this patchbay! They are oriented so that the cable will block other inputs. I bought those first but had to change to straight midi cables instead.
Qualità
2
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
M
Works as it should
MetalJonesy 30.03.2020
Very tidy little device to clear up the clutter on your Rockboard. I recently bought a RockBoard after many years using my own custom made board. I wanted to streamline my effects and moved to an HX stomp in replacement of my drives, delay, reverb, eq, phaser and compressor.

I have been using a 4 cable method for years in the analog domain with a Joyo PXL Pro switcher so already built my own patch box to get rid of cables going everywhere. I could have carried on using it, but the added feature of the IEC through means I can now mount both PSU's and MXR brick under the board with use of an IEC split out Y cable and some IEC to plug socket. It also integrates seamlessly and just makes the whole set up look really professional!
Qualità
2
0
Segnala un abuso

Segnala un abuso