Con i nostri cookie vorremmo offrirti l'esperienza di acquisto più piacevole possibile con tutto ciò che ne consegue. Ciò include, ad esempio, offerte personalizzate e memorizzazione delle preferenze. Se per te va bene, clicca su "Procediamo!" per accettare l'uso dei cookie per preferenze, statistiche e marketing (mostra tutto). Il consenso può essere revocato in qualsiasi momento tramite le impostazioni dei cookie (qui)
Devi effettuare il login per poter lasciare una recensione.
IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.
Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio
personalmente penso che la goldo sia un'ottima azienda per la produzione di pezzi per liuteria.
soprattutto per la liuteria "specializzata": al momento sono gli unici produttori di ferrule da basso che sono riuscito a trovare.
per il resto niente da dire se non che sono fatte di ottimo materiale!
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
DB
Simple yet Elegant
David B. 6946 08.04.2018
These were bought for a Harley Benton PB-50 mod project. Iwas going for the original 50's look so string through body was a must.
Since the PB-50 was ordered from Thomann it made sense to order the bushings too. The price was also better than I could find in the UK.
Very easy to fit. Once I'd position my 2 saddle bridge I bored pilot holes then flipped the bass over. A 9.5mm countersink finished the drilling. A tap with a rubber mallet saw the bushings secure.
If you want the bushings lying flush with the back of the body use a 12.5mm flat bit to the depth required (2mm I found) before using the countersink.
No "cons" were discovered. It's a very simple product that works well. Highly recommended.
You can see the finished PB-50 on bassic.de, basschat.co.uk, onlybass.com and talkbass.com. look for posts by kodiakblair.
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
S
Solid and well made.
SeanMandrake 08.09.2015
Sturdy. Good quality. Appears to be a brightly plated brass. Ideal for an upgrade or, as in my case; retrofitting a bass string to a guitar. Only as deep as it needs to be so should fit thinner bodies well.
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
S
Saitenführungshülse
Shortscale-Basser 23.04.2014
Schwierigzu bewerten. Die Hülse macht was sie soll und ist tadellos verarbeitet. Dafür 5 Sterne. Allerdings schreibt der Hersteller nicht dazu, für welche Bässe sie gedacht ist, dafür gibt es einen Stern Abzug.
Ich habe sie für einen alten Mustang-Bass gekauft. Dafür ist sie einen Tick zu dünn und rutscht beim besaiten leicht raus. Außerdem könnte sie etwas länger sein. Aber mangels Alternativen behalte ich sie, sie funktioniert schließlich ;-) Nur die Produktbeschreibung könnte ein wenig aufschlussreicher sein.