Thon Rack Panel 1U 8XLR

765 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.7 /5
  • quality
Total
quality
Thick metal, sturdy panel
KRNFL69WR, 22.08.2019
This panel is made of pretty much thick metal - it's enough, so it won't flex, or move.

Bought it for a bit different purpose than mounting in a rack - I've made a "patch panel" for a pedalboard from it. Paired it with neutrik lockable connectors. This also helped to get rid of some cable clutter across pedalboard, connecting your in and out, fx loop send and return, and sometimes trigger signals to act as a footswitch for the amp. Put a PowerCON connector there too, so setting up would take less time.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Does the job
21.02.2015
It's a good panel, it fits perfectly to the rack and takes the connectors very well too. A couple of niggles though ( and they are just niggles), there is a very slight flex in the panel when connecting stuff, mostly the middle sockets and it is very slight but there all the same, so not too sure how that will hold up over time. The other is depending on your ocd levels, it doesn't bother me but l did notice it , is that the two fixing holes for the screws are fractionally and l do mean factionally out so the sockets are pulling clockwise by a hair when fixed. Personally for the price l think this is a great panel and if the flexing doesn't become an issue six months down the line l'll happily come back and upgrade to five stars.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Not robust...
E H., 23.11.2015
It arrived already bent & twisted in the box, i was surprised that I could straighten it back into a useable shape by hand (yes, the metal is that flimsy!)... I'm not going to bother wiring it up as it won't survive long on the road in my job. May be ok for gentle home studio use I guess. First really bad item I've bought in years but since it's a cheapie, I'll just bin it... I've got steel versions of these elsewhere in the past that feel like they are 10x times stronger. Biggest annoyance is that I've wasted a week waiting for this. Avoid!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
kabba, 03.06.2019
Very good panel,with good quality,
it fits to the standard racks and adapt the XLR and Speakon connector very well
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Great construction
James Clayton, 04.01.2018
Brilliant build quality, just a little annoying it doesn't come with any screws as they don't come with any of the adapter fittings either. Make sure to get these as well!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Thon Rack Panel 1U 8XLR
James007, 11.06.2013
Simple well made rack panel. It's pretty sturdy and well finished. The pre drilled holes were accurately done so fitting was easy. These can be really handy as a break out on a rack case for monitor sends instead of having to get under the mixer and read the sockets. I use mine for the Speaker master out sockets as getting to the underside of my mixer in the rack is quite tough - so this makes it a lot quicker. It'll work with any standard socket - XLR, Jack, Speakon etc.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Practical but a little negative on the estetics
Fats, 28.03.2014
Rack panel does what you expect but in my case putting the Neutric XLR males and females in, noticed that the squares form of the XLR's can not be set completely vertical.as the pre-drilled holes in the panel for the screws are a little out of position
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Good quality but the M3 holes are slightly off angle
thelxman, 13.11.2014
Good quality metal with edge folds for rigidity. Assembled some custom rack panels with these and Neutrik connectors but found that the M3 holes in this panel were slightly rotated from the angle required to get the connector square to the edge - the same on 3 of these panels. Also the D25 is slightly low to the bottom fold to get a nut spinner in there for tightening the nut, which risks deforming the hex slot in an M3 hex countersunk bolt.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Rack panel
And.M., 04.01.2018
Sturdy, cheap (only in price) and does what it's supposed to do. And the mounting holes are precise, unlike some other brands. Using this to connect the back of my live rack to venues' setups, and it works like a charm. Be careful what screws you use to mount the connectors, some tend to strip the hole. All in all, very recommended.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Good panel
M1tsos, 12.01.2020
Good panel in fair price
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Excellent panel
Ronnie D., 22.03.2017
Perfect fitting rack panel that does exactly what it says on the tin. Very happy with her
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
nice
stein~~, 10.06.2019
it does what it's supposed to be
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Mounting holes not quite right
Richard F. 40, 06.10.2013
Works OK, but the mounting holes for the connectors are not quite right.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
rack panel
Shaun H., 20.04.2014
This rack panel is being used for the distribution of my amplifer rack, the rack will be hard wired to this pannel, XLR female and speakon sockets will be used for this, the xlr sockets will be hard wired to the amps and the the output of the amps will be hard wired to the speakon sockets which from there will go to the cabinets/speakers,

the panel is the right price and very good quality,
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
1U rack panel
Ian2268, 30.10.2014
Great quality
As it has the return along the length of it, it is significantly more rigid than the type which are just flat metal. The flat type always flex an awful lot when you use them
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Audioline, 31.05.2018
Used it on a couple of racks with positive results. Does what its suppose to do, metal seems of good quality and the paint is still spott on. Also, cheaper than the equivalent from other known brands.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
MrFreekie, 10.08.2017
Fits a 1U rack space, Fits 8 XLR or other D Shape fittings such as NL4, Ethercon, Powercon etc...
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Thon Rack Panel U1 8XLR
Benni D., 14.05.2013
Can't really go wrong with it. Nice and sturdy metal plate. Holes are drilled well and perfect size. Standard rack size so mounts perfectly!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Thon Rack Panel 1U 8XLR
Vinny, 11.11.2017
Plugs rotate slightly to the left.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
04.05.2016
Nothing to hint. Nothing to break, nothing to send back :)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report

Thon Rack Panel 1U 8XLR

€7.90
Including VAT; Excluding €15 shipping

Dispatch expected by Mon, 28. September

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
(6)
Recently Viewed
Behringer RD-6-SR

Behringer RD-6-SR; Analog Drum Machine; 8 Drum-Sounds: Bass Drum, Snare Drum, Low Tom, High Tom, Cymbal, Clap, Open Hi-Hat und Closed Hi-Hat; volume control for all instruments and the Accent track; build-in distortion effect with controls for intensity and tone;...

Recently Viewed
Fender Billie Eilish Concert Ukulele

Fender Billie Eilish Concert Ukulele, concert ukulele, signature, top and body sapele, nato neck, hardwood neck laminated, neck binding, 16 frets, nut width 35mm (1,375"), scale 381mm (15"), fishman kula preamp, open gear tuners, abalone rosette, finish black satin with...

(2)
Recently Viewed
Harley Benton Dullahan-FT 24 Roasted IB

Headless Electric Guitar Ergonomically shaped alder body, Bolt-on neck: Roasted Canadian flamed maple, Roasted maple fretboard, Fretboard inlays: Black offset dots, Neck profile: Modern C, Fretboard radius: 350 mm, Scale: 648 mm, Nut width: 42 mm, Graph Tech TUSQ...

Recently Viewed
Fender CuNiFe Wide Range Humb. Neck

Fender CuNiFe Wide Range Humbucker Neck; Telecaster Humbucker; Resistance: 10.1 - 10.7k; Color: Chrome

Recently Viewed
Blackmagic Design UltraStudio Monitor 3G

Blackmagic Design UltraStudio Monitor 3G; Video output device for 3G-SDI and HDMI playback via laptop or desktop computer equipped with Thunderbolt 3; supports professional SDI and HDMI monitoring in 10-bit broadcast quality of material from common editing software such as...

Recently Viewed
Presonus AudioBox 96 Studio Ult 25th An

USB Audio Interface Recording Set Consists of AudioBox USB 96 25th Anniversary Edition, Studio One Artist + Studio Magic Plugin Suite (Ableton - Live Lite, Arturia - Analog Lab Lite 3 and many more) (ESD download), Eris E3.5 active...

Recently Viewed
Nux Optima Air NAI 5

Nux Optima Air NAI 5; Effects Pedal for Electric & Acoustic guitar; dual-switch acoustic guitar simulator with a preamp for acoustic and electric guitar, 15 built-in acoustic guitar profiles with IR level control, 9 Preset slots; Controls: Reverb, IR Level,...

(1)
Recently Viewed
Thomann ComboDesk88 - designed by Zaor

Producer Workstation Designed by Zaor, Ideal for home and project studios, Extremely sturdy and ergonomic construction, 19" Racks with a total of 3x 3 U, Includes cover plates for 19" racks for expanding the table surface and rack rail,...

(4)
Recently Viewed
Behringer RD-6-AM

Behringer RD-6-AM; Analog Drum Machine; Acid Smiley Edition; 8 Drum-Sounds: Bass Drum, Snare Drum, Low Tom, High Tom, Cymbal, Clap, Open Hi-Hat und Closed Hi-Hat; volume control for all instruments and the Accent track; build-in distortion effect with controls for...

Recently Viewed
Kala U-Bass Nomad 4 NT

Kala U-Bass Nomad 4 NT, acoustic-electric U-Bass, 20 13/16" (528 mm) scale, 29 3/8" (746 mm) overall length, Mahogany top, Mahogany back and sides, Mahogany neck, 16 frets, Rosewood fingerboard, Graph Tech NuBone nut, composite saddle, custom black die cast...

Recently Viewed
Larry Carlton S7FM TBL

Electric Guitar Body: Alder, Top: Flamed maple, Bolt-on neck: Roasted maple, Fretboard: Roasted maple, Abalone Dots fretboard inlays, 22 Medium jumbo frets, Scale length: 648 mm (25.5"), Fretboard radius: 241 mm (9.5"), Nut width: 42 mm (1.65"), Bone nut,...

Recently Viewed
RME HDSPe AIO Pro

RME HDSPe AIO Pro; 30-channel PCI Express audio interface; 192 kHz / 24 bit; ADI-2 Pro converters AK5572 and 2 x AK4490; the entire analog input range relies on the circuit design of the ADI-2 Pro (+24 / +19 /...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.