S
Using with Lightkey
I bought this to connect my Mac using Lightkey to my DMX lights and it worked very well. Reliability is what you need in kit like this so I was pleased.
1
0
Report
s
The absolute favorite interface
My absolute favorite interface for under 100 ? !
Just for your information first: I design so light shows , in the middle frame , as I would say thomann , ie with approximately ( depending on performance ) up to 16 moving heads , lots of Par Light and LED Pars .
When I saw the article here on the website , told me first on the pictures the blue body color not to - black I would have been leiber - already after thomann unpacking I liked the case then very good.
It is not necessary a driver (which it on the website are Enttec ) to download - at least it was not the case with me . So it goes without going on the same time-consuming and annoying Installierarbeiten .
Use the interface thomann in connection with the DMX control software " Freestyler" and am more than satisfied. It is suitable for almost all software and freeware for Art-Net . It includes a complete DMX Universe - that is, 512 channels.
Done The output of the DMX data, even using many channels , in my view , very fast !
Thomann only criticism is the somewhat loose on the housing mounted USB port that can not be verrigeln Also when connecting a cable so that the cable talk easily slide out - you know this but , there should be no problem prevent this .
NOTE : It is advisable to connect a DMX Adapter Cable 5-pol. male - thomann 3 -pol. female equal to order with , unless one is in possession of such a cable . Available here at Thomann already for less than ? 5 . Just as a tip on the edge .
Just for your information first: I design so light shows , in the middle frame , as I would say thomann , ie with approximately ( depending on performance ) up to 16 moving heads , lots of Par Light and LED Pars .
When I saw the article here on the website , told me first on the pictures the blue body color not to - black I would have been leiber - already after thomann unpacking I liked the case then very good.
It is not necessary a driver (which it on the website are Enttec ) to download - at least it was not the case with me . So it goes without going on the same time-consuming and annoying Installierarbeiten .
Use the interface thomann in connection with the DMX control software " Freestyler" and am more than satisfied. It is suitable for almost all software and freeware for Art-Net . It includes a complete DMX Universe - that is, 512 channels.
Done The output of the DMX data, even using many channels , in my view , very fast !
Thomann only criticism is the somewhat loose on the housing mounted USB port that can not be verrigeln Also when connecting a cable so that the cable talk easily slide out - you know this but , there should be no problem prevent this .
NOTE : It is advisable to connect a DMX Adapter Cable 5-pol. male - thomann 3 -pol. female equal to order with , unless one is in possession of such a cable . Available here at Thomann already for less than ? 5 . Just as a tip on the edge .
5
1
Report
DN
Nice little unit for 1 universe
Good nice little box for one universe. Using this with Obsidian Onyx (v 4.2 is the lest who supports this for 1 universe). Using this for 2-4 moving heads and some LED bars. Never let me down.
1
0
Report
RL
Works, but
Cheap and solid, but annoying that you have to unplug/replug it most of the times cause QLC+ doesn't recognize it at first.
I'd still buy it again, cause it's cheap and at the end does the job, but what's the sense of having something so easy that's supposed to be plug and play if it's not...
I'd still buy it again, cause it's cheap and at the end does the job, but what's the sense of having something so easy that's supposed to be plug and play if it's not...
0
0
Report
v
Good but old device
I have used this interface repeatedly with different setups of SW and HW and it has never failed me. Sadly it's rather old and often not supported by modern software, even made by Enttec! Even the SDK supplied by the manufacturer is so old it's almost unusable nowadays. If you want DMX from you computer, don't cheap out and get the DMX Pro.
1
0
Report
A
Top! quality easy to use
well, not so much to say: top quality/price ratio, easy to install, just connect it to your light system, select it in your DMX software and go!
(Windows 10 -64 bit, Freestyler X2, used in 2 different setup 25 DMX fixtures in the first, 18 fixtures in the second)
(Windows 10 -64 bit, Freestyler X2, used in 2 different setup 25 DMX fixtures in the first, 18 fixtures in the second)
0
0
Report
ec
Works with Lightkey & MacBookPro without problems
0
0
Report
A
Does not support TouchDesigner
Unfortunately, it does not runs with the TouchDesigner. You can find out about this on the manufacturer’s website (there is a list of apps with which it works), but I did not. Keep this in mind.
I have no other problems with the interface. I think it works as it should in other software.
I have no other problems with the interface. I think it works as it should in other software.
0
0
Report
T
Awesome
Affordable product for those who want to use software based dmx controllers. Wished they have a 3 Pin version but this is not an issue and can be easily fixed by buying the bundle instead.
0
0
Report
F
Does what it says
If you’re looking to control a single universe/have a small set up, this device is great. Paired with Beam 4 Live it’s simple to sett up and an effective addition to a live setup
0
0
Report