K&M 18952 Stacker BK for 18950

261

Stacker for 18950 and 188/2 Keyboard Stands

  • Adjustable by height and tilting
  • Felt pads and stop pins are gentle for the instrument
  • Weight: 2.3 kg
  • Height adjustable between 265/390 mm
  • Support depth: 340 mm
  • Up to 30 kg load capacity
  • Colour: Black
  • Price per pair
numărul articolului 102186
unitate de vânzare 1 bucată(ăţi)
Type Of Keyboard Stand Extension
Colour Black
B-Stock disponibil 238 lei din
258 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Marţi, 7.05. și Miercuri, 8.05.
1

261 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Stabilitate

Măiestrie

126 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
C
Great addition for 18950
Christopher770 16.01.2016
I use this pair of stackers on stage to support a 61 note synth over the top of a larger synth on the main stand.

The stackers are adjustable either for ease of playing or for visibility so that you don't obscure the bottom synth too much. This is done by either moving them up or down or adjusting the angle of tilt. This must be set prior to playing as it cannot be adjusted with the synths in place.

Initial setting up to ensure the stackers are level can be fiddly but once I realised that I needed to simply revolve one of the stackers through 360 degrees to match its positioning with the other it was fine. You will see what I mean.

The built in support pins are rogust and hold the top synth in place very well. However the stackers do not adjust for width and it is important to balance the top synth. Over enthusiastic playing at one end of the keyboard can move the synth vertically as it overbalances slightly but knowing this means you simply take a little care.

Otherwise this product together with the main stand it fits into is easily one of the most robust and secure on the market. Highly recommended.
Stabilitate
Măiestrie
2
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Sturdy and easily adjusted.
Anonim 14.04.2016
I bought these to add an extra tier to my K&M 18950 and these couldn't be simpler to use - just slot them into the main stand, fixing them into place and then set your height and angle.

You can also adjust how far forward they extend over your existing keyboard, so you can have the upper one further back, to allow easier access to any surface controls.

The ends have a rubber-capped stopper, so your keyboard won't slip off if you have it tipping down at an angle.

Pros:

- a simple method of expanding storage for your keyboards
- sturdy
- easy to assemble.

Cons:

- none, really!
Stabilitate
Măiestrie
3
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Sturdy Stacker
Arthur99 19.12.2019
Very sturdy stacker, works perfectly in combination with the stand.
I've used it for small, medium and bigger instruments (MS101, OB-6 and a Hammond xk1c) and it worked perfectly for all of them.

Very high quality as you can expect from K&M.
Stabilitate
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
AF
Great Quality as Always from K&M
Artur F 18.12.2018
Very good quality. The price might be higher than with budget competitors, but the stability and built quality is supers. I would rather trust these holders to hold my keyboard.
Stabilitate
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz