Jaspers Holders 30B

164

Holder

  • Length: 30 cm
  • Load capacity: up to 15 kg (extendable with shelf reinforcement up to 40 kg load capacity - not included)
  • With stoppers and two-part tube clamps
  • Can be mounted anywhere without dismantling the stand
  • Material: Powder-coated aluminium
  • Colour: Black
  • Scope of delivery: 1 pair
disponibil din Februarie 2007
numărul articolului 109854
unitate de vânzare 1 bucată(ăţi)
Type Of Keyboard Stand Extension
Colour Black
198 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Vineri, 10.05. și Luni, 13.05.
1

164 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Stabilitate

Măiestrie

64 Recenzii

NK
Just what I expected minus a slight detail
Nike Kid 28.12.2017
The fixing system on this holder is different from the one of my 40B holders. It's not that easy to adjust it once you get it fixed. You need to unscrew two bolts to do that and it almost comes off when you do that. The fixing system could've been easier to manage.
Stabilitate
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
i
If you're reading this, you probably need these.
infindebula 14.09.2021
I think all the Jaspers stands already come with these holders, so their function should be no mystery.

My only gripe is the little hooks on the end - they are generally fine, but not quite long enough for certain keyboards. For example, the Akai AX60 has an angled lower chassis, so the hooks do not quite come up high enough to hold the keyboard in place. I own a few other vintage keyboards with a similar slope on the bottom, but I haven't tried them yet. I think the Korg DW series and Poly-800 may have similar trouble.

I was able to correct this by replacing the hooks with 1/4 x 3/4 inch aluminum bar stock. I cut the bar to about 65 mm in length, then drilled and countersunk a hole for the screw, and finally spray painted the pieces black. It was a lot of work, but it fixed the problem.

I'm rating these holders 5 stars for stability and quality, but only 4 total because they are not suitable for all keyboards, and Jaspers does not offer longer hooks for the end of the holders.
Stabilitate
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
TP
Simple and effective
The Professor 06.05.2020
These neat little equipment arms bolt on to your existing Jaspers keyboard stand so you can, uh, stand more keyboards. In my case I'm actually using them for a variety of other kit, like some of the heftier old drum machines, an Akai sampler or two, and the like; so I've got four pairs of these spanning one tier of a multi-tier stand. They work very well and the friction grips can be entirely opened, allowing you to attach them to the stand without disassembling it (which is a relief). Not exactly exciting, but very handy, and the build quality is excellent.
Stabilitate
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
o
Great quality
ocelot 28.03.2022
Mounted on my Jaspers 3R-120B keyboard stand to hold either the VC340 or Arturia Minibrute 2. Ajustable angle and width. No problems so far and I'm generally satisfied with Jaspers products,
Stabilitate
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz