Göldo Truss Rod Double Dual WS48B

18

Truss Rod for Bass

  • Ingenious dual-action without much space
  • Two mutually working bars
  • The nut sits in a capsule welded to the lower bar
  • If you turn clockwise, it pulls the upper rod against the lower one
  • If you turns counter-clockwise, then the end of the nut presses against the capsule from the inside, thus pushing the rod against the lower one
  • Weight: 200 g
  • Dimensions: 6 x 8.5 x 590 mm
disponibil din Noiembrie 2005
numărul articolului 187280
unitate de vânzare 1 bucată(ăţi)
63 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Luni, 6.05.
1

18 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

12 Recenzii

gp
se monteaza pe un bass Handmade
george puiu 06.07.2016
Precis,acuratete buna,actioneaza foarte rapid!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
P
Give us back the old version!
Prometeus 27.06.2018
Bought a pair of these truss rods as I always used Goldo bars and never had troubles before.
This version, though, is waaaay worse than the old one. The blue "tape" around it comes off easily, but more important, the nut on the end is HUGE, needing a very deep routing. It's also longer than the nut on the older model, so once I found out, I couldn't even go back and use the old version. Bummer. The guy who made these must be a sadist.
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Trussrod for bass
Duijnold 21.08.2017
If you buy this you know how to build a guitar....

This is the second truss I buy for my 2nd bass building project. How to evaluate a product like this....

Well,... it seems strong, light and the blue covering will reduce rattle. How it performs over the years remains to be seen.

However, I would like to see more choise in the Thomann catalog. Next project I would like to buy a more vintage style bass truss.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate fr
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
X
Pratique et universel
XB21 18.05.2011
Truss rod (tige de renfort de manche) d'utilisation simple. Il suffit de l'enfiler dans une gorge de la largeur de la tige, réalisée à la défonceuse au centre du morceau de bois destiné à fabriquer le manche, en creusant un espace légèrement plus large pour le boulon de réglage au niveau de la tête et de ménager un sillon d'accès allant au-delà de cet élément de réglage pour permettre de passer la clé Allen servant à tendre ou détendre le truss rod. Il sera ensuite recouvert par la touche et, en s'appyant sur celle-ci, permettra d'arquer le manche de façon convexe ou concave (modèle double-action).
Pour luthier en herbe ou fabricant confirmé.
Măiestrie
1
1
semnaleaza un abuz

semnaleaza un abuz