Göldo 500K log Mini Pot

331

Pot for Electric Guitar or Bass

  • Manufacturer designation: E500M
  • Small size
  • Housing diameter: 16.5 mm
  • Resistance: 500 kOhm
  • Resistance curve: logarithmic
  • Axle: coarsely fluted slotted axle (18 teeth for imported guitars & potentiometer knobs)
  • Thread diameter: 8 mm
  • Thread length: 10 mm
disponibil din Aprilie 2006
numărul articolului 192488
unitate de vânzare 1 bucată(ăţi)
Design Tone
Resistance Value 500 kOhms
Characteristic Curve Logarithmic
Thread Length 10,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
14,30 lei
Include TVA la care se adaugă 89 lei costul de transport
Reduceri pe volum
Preț pe bucată Veți economisi Cantitate
14,30 lei 1
13,69 lei 4,3% 4
12,99 lei 9,2% 8
12,39 lei 13,4% 12
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Joi, 2.05. și Vineri, 3.05.
1

331 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

102 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
Don't let the low price put you off
Sinest 12.09.2020
I used these on a Aria Pro II L5 style hollowbody guitar, to replace the old scratchy pots , 1 of which was completely dead so I had no sound on the neck pickup.
I wanted full size pots, but they did not fit on that particular guitar because of the small F-holes.
On the multimeter they measured from 485K to 530K which I think is great. I've seen CTS pots that are way worse off spec than these.
The taper also is nice and gradual.
They dont feel too loose like CTS but neither too stiff and slow to turn like Alphas. Just make sure you don't cook them with the soldering gun, then the soft feeling will go away and the pot might be ruined completely.
The shaft, axle and nuts could be made out of brass or something more sturdy, but they work fine anyway, just do not overtighten them.
For metric-mini-pots, that is my choice and I recommend them.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
P
Alright
Perwanie 01.05.2018
So these potmeters are good, easly to place and work smoothly.


Pros:
Cheap
Quality
Smooth running
Clear tone
Easy to assemble
Nice grip

Cons
The tone compared to fender pots are not as deep, but on the listening ear theres not too much difirence.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Nice mini pot
DominikZ 17.08.2015
The operation is very smooth and slightly on the light side (which some will like and some won't). There is no unwanted noise from operation out of the box, but we'll see how it will hold up in the long run. It is a small body size pot, so it will fit in tighter spaces than a larger size pot. All in all, you can't really expect much more from a potentiometer :)
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Pots for my Hohner
Anonim 29.12.2014
I use this pot for my Hohner G2T. The electronics pocket is quite small so i choose the small pot shape. I replaced the original tone and volume pot with it. The pot is very easy to solder, both the contacts and the back of the pot. The pot works fine and is adjusted with a smooth feel. It does not produce any crackle sounds. It appears to be sturdy so i hope it has a good long term durability. I was more or less expecting the small pot shape not to produce enough friction whilst being turned due to the small face but it works just as fine as a big one.
Măiestrie
0
1
semnaleaza un abuz

semnaleaza un abuz