Göldo Distance Ring WKSRG

71

Spacer Rings for Machine Head Buttons

  • 25 White distance rings and washers each
  • For mounting between the housing and the button of a closed-type guitar machine head, thus creating more spacing between the button and the headstock edge
  • For electric and acoustic guitars
  • Diameter black (inside / outside): 4.1 / 5.8 mm
  • Diameter white (inside / outside): 4.05 / 6.3 mm
disponibil din Octombrie 2012
numărul articolului 295323
unitate de vânzare 1 bucată(ăţi)
37 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Luni, 6.05.
1

71 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

35 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Smooth Runnings!
Anonim 29.08.2015
Firstly Thomann is THE only place I've found that sells these near-on-impossible to find spacers and washers, after years of searching one day I just stumble upon these while browsing for other parts....imagine my delight!

I like to have my tuning buttons screwed in reasonably tight to help with tuning stability but this has it's downsides namely even the slightest overtighten can result in the plastic spacer/crush washer splitting, therefore coming off as you tune up, especially in vintage guitars where the plastic/nylon slightly degrades.
I have a box half full of donor tuning pegs which hace keept me in (used) replacements...until they ran out and I had to manage with tuning pegs looser than desirable, well no more!! I can testify t0 the quality of these Goeldo parts as I've installed them on 3 tuners now and they fit perfectly, turn smoothly and are made of what seems very durable nylon/plastic.

Very happy!
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
GK
Good but not for bass
George Konstantine 24.01.2014
These are very well made, good quality.
It is difficult in general, to find them for sale.
My only issue with them is that they are not the correct size
to use for bass tuners. They are made for guitar. This is not
specified when buying them. Hence the 4 star total.
Măiestrie
4
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
b
excellent
billggk 24.03.2021
I have for years a broken distance ring the white one in my explorer with Grover tuners and I used O rings but they wear all the time this set fits perfect
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Helped me a lot
Anonim 20.02.2017
I bought this set in order to repair a machine-head on my Schecter Hellraiser C-7.

It is a perfect replacement for default distance ring, and now the machine head works precisely as it should. No problems with tuning at all.

Strongly recommended for those, who face the same problem. It is much cheaper to buy a set of these rings than a single machine head.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz