Fairfield Circuitry Hors d'Oeuvre Act. Feedb. Loop

3

Effect Pedal for Electric Guitar

  • Active Feedback Looper
  • Expands the possibilities of already used effect pedals
  • To create positive and negative feedback loops
  • Allows mixing a dry signal with any signal chain, the removal of the basic signal to hear only the effect signal, inverting the phase in the effect signal chain and mixing two signals in 2 different outputs and splitting a signal to 2 outputs
  • Controls: Dry, Wet, Feed
  • Switch: Positive / Negative Switching for Feed and Wet
  • LED: Effect on
  • Footswitch: Effect bypass
  • Input: 6.3 mm jack
  • Output: 6.3 mm jack
  • Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
  • Current consumption: 30 mA
  • Power supply over 9 V DC power supply (not included - suitable power supply: Art.409939)
  • True Bypass
  • Dimensions (W x D x H): 120 x 97 x 48 mm
  • Weight: 420 g
  • Made in Canada

Note: Battery operation is not supported.

disponibil din Decembrie 2020
numărul articolului 508578
unitate de vânzare 1 bucată(ăţi)
Type Looper
LED Display Yes
PSU Connector Yes
Shape Floor Effects Pedal
MIDI Interface No
1.222 lei
Transport gratuit incl. TVA
Disponibil in 3-4 Saptamani
Disponibil in 3-4 Saptamani

Asteptam acest produs in stoc curand si va putea fi expediat imediat.

Informații despre livrare
1

3 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Caracteristici

Măiestrie

3 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
A noise machine for those who are willing to experiment
Andrew! 05.03.2022
This pedal is not a traditional effects pedal. You will need additional effects (or a chain of effects), plugged into the send/return loop. Then your input signal is fed through this and it feeds back on itself. The sound o it very much depends on what kinds of pedals you're using with it. You can use anything, but I've got interesting results with reverbs, ring modulation, and other types of modulation.

You might get the most useable results when going into a compressor as the output can be quite wild. Use small changes of the parameters to ride the storm and create an evolving chaos.
Caracteristici
Măiestrie
6
0
semnaleaza un abuz

semnaleaza un abuz

YouTube pe acerst subiect