Doepfer A-180-9

21

Multicore Module

  • Ideal for connecting multiple systems or housings
  • Up to 14 signals can be transmitted via common network cables (RJ45)
  • Width: 2 x 4 HP
  • Depth: 25 mm
  • Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
  • Compatible with Intellijel Octalink 1U (Article Nr. 461580), not included
  • Scope of delivery: 2 modules and 2 network cables with a length of 0.5 m
disponibil din Martie 2018
numărul articolului 435481
unitate de vânzare 1 bucată(ăţi)
Width 4 TE / HP
Tools 1
585 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Luni, 29.04.
1

21 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Măiestrie

18 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
v
Neat & effective solution to carry CV and Audio
vovali 09.07.2019
I used the A-180-9 to carry CV signals between two euroracks 6 meters apart, and it worked perfectly.
Then I tested two A-180-9 carrying stereo audio signals from a patchbay (with amps, instruments, & effects), to a mixer, a tape recorder and A/D interface, all gathered 10 meters apart from that patch bay.
So Mixer, recorder and A/D were connected to one A-180-9 with short mono cables, then the two ethernet cable (well shielded, good quality CAT 6) went across the battlefield to the other A-180-9 close to the patchbay. Good signal, no interferences, no crosstalk.
I managed just two cheap long cables on the floor instead of 14 expensive ones. For this price is ace.
Manipulare
Caracteristici
Măiestrie
5
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
jn
Great modular utility
james n 22.11.2022
Fantastic for reducing cable spagetti between different cases. It takes some testing of how to divide/pair the cables setting between audio and control voltage cables as there can be significant "leakeage" and ghost interference. But all in all I love these modules (I have 6 of them)
Manipulare
Caracteristici
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
x
a very useful tool
xavierxeon 06.05.2021
I have the 2 modules of the multicore on opposite ends of one 178 HP rack, so I do not need to have a lot of cables going across the rack. The 2 CAT6 cables connecting the multicores run behind the rack (3 meters, not the short ones supplied with the units).

It really helps clean up cable clutter and thus have more space for my hands to actually turn knobs on the modules.

Downsides are, that there is a light crosstalk between the channels (which you only here if you connect a cable from an unused channel to a mixer and crank up the volume) and that the cables going in / out of the multicore are bunched up really tight together.
Manipulare
Caracteristici
Măiestrie
3
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Helps bring sanity to wiring mess
Mibix 21.01.2022
nice for helping to limit the cables between cabinets. great for CV. have to be careful with audio. there can be some crosstalk. using cat8 cables helps but does not completely eliminate crosstalk.
Manipulare
Caracteristici
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz