Doepfer A-138a Mixer Linear

31

Eurorack module

  • 4 Channels
  • Suitable for control voltages and audio signals
  • One attenuator per channel
  • Eurorack format
  • Width: 8HP / 40.3 mm
  • Depth: 35 mm
  • Power requirements: +10 mA (+ 12V) / -10 mA (-12V)
disponibil din Iunie 2007
numărul articolului 114504
unitate de vânzare 1 bucată(ăţi)
Modul Type Mono
Width 8 TE / HP
291 lei
Include TVA la care se adaugă 89 lei costul de transport
Disponibil in în aproximativ o săptămână
Disponibil in în aproximativ o săptămână

Asteptam acest produs in stoc curand si va putea fi expediat imediat.

Informații despre livrare
1

31 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Măiestrie

14 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
MQ
Solid linear mixing with an oft overlooked trick up its sleeve
Martyn Q. 01.10.2015
As a mixer it works a charm, signal quality is more than sufficient for most uses - gets used in every patch without fail. A key feature that it seems most don't realise is there - channel 1 gives a constant cv 0-5v when nothing is plugged in, so can be used to offest cvs that are being mixed in channels 2-4. Most people I've spoken to don't seem to realise that feature is there - neither did I till I read the manual (read it out of curiosity I should add, other than this feature the module is entirely self explanatory).
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Super useful
Anonim 19.01.2017
I think this module comes under the heading of 'very useful, but not sexy'.
I've used it to mix two LFO outputs and then sent that to modulate the filter cutoff, the PWM of the VCO, and also the CV input on the VCA.
Super useful.
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
A great workhorse
Anonim 26.05.2016
I bought this to mix CV signals to a single input on filter modules; it works beautifully, is very solidly constructed and came with the screws required to mount it in my case.

It takes up little room, draws little power and is highly recommended for more complex patches!

I will be buying at least one more in the future.
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
JL
Good.
Jim Lloyd 12.02.2019
Easily Use. Reasonable Price.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz