Behringer CP35 Attenuators

7

Eurorack Module

  • 4 Passive attenuators with normalised inputs
  • 4 Outputs for a fixed reference voltage (2x +6 V and 2x -6 V)
  • 2 Passive 4-jack multiples
  • Current draw: 1 mA (+12 V) / 1 mA (-12 V)
  • Width: 21 HP
  • Depth: 35 mm
disponibil din Mai 2020
numărul articolului 490731
unitate de vânzare 1 bucată(ăţi)
Modul Type Mono
Width 21 TE / HP
B-Stock disponibil 243 lei din
328 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Luni, 6.05.
1

7 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Măiestrie

3 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
t
Very useful sub control CV line.
toshino 25.05.2021
This module divide 3 areas.
Upper area is ATTENUATORS,
This area function same to "995 ATTENUATORS" , but this CP35 has 4 volumes and outputs.
Normally use Attenuators, input signal add upper left side inputs, and return each gain down control voltage with volume, and output to down side .

Next one is CP35 only.
If you want to change the control voltage BASE LINE voltage to UP or DOWN, you patch -6V or 6V to OUTPUTS connector, you can change the control voltage center up to 6V and down to -6V.
This function create a new sound effects.
(some module has electric crash from outside HIGH voltage, please check and use carefully. As your own risk.)
Manipulare
Caracteristici
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Good Replica
Alvino 24.07.2020
The attenuators are bidirectional (this is not obvious). However there are only two each of the -6V and +6V outputs. I use the -6V output to bias my 921 Oscillator or 921A Oscillator Driver so that the control knob is closer to zero when summed with the keyboard CV. The multiples are handy.

I do wish that the voltage bias outputs were independently buffered.

Obviously there is space on the panel for more functionality, but this is supposed to be a Moog System 55 replica so not so much. Therefore instead of knocking off 2 feature stars I only knocked off 1.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz