ART Splitcom Pro

70

Microphone Merger / Splitter

  • Phase reverse switch
  • Galvanic isolation of the channels
  • Ground lift switch
  • Main Mic Input XLR
  • Isolated mic input / merger XLR
  • Mic Main Out XLR
  • Isolated Mic Out / Splitter XLR
disponibil din Septembrie 2008
numărul articolului 217486
unitate de vânzare 1 bucată(ăţi)
Number Of Channels 2
Inputs 2
Outputs Per Channel 1
+48 V Phantom power No
Grd Lift Switch Yes
Pad Switch No
Headphone Outputs No
Design Desktop
241 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Joi, 16.05. și Vineri, 17.05.
1

70 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Sunet

Măiestrie

35 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
R
ART Splitcom Pro
Richard4902 23.02.2015
I've bought this for a specific reason.

I Run 2 BOSE L1s with B2 subs.. and use a Mackie DL806 desk..
I needed only to have one BOSE system in a venue for an event, but needed more inputs than the BOSE Tonematch had.
I used a lead from 2 - XLR outs (desk) to a Stereo jack in for the BOSE PA.
I got such a strange sound, like a crazy reverb and low volume levels, but had no reverb on the desk. I ended up using just the left channel, wasn't happy with the sound that night.. something was missing.

I looked into why and found that, the lead doesn't 'SUM' the outputs to create a clean balanced signal.

Hence why I've bought the ART Splitcom Pro.
I now should be able to have a stereo signal 'SUMMED' into one lead.

I can guarantee someone else has had this problem.
Hope this review will help you.
Sunet
Manipulare
Caracteristici
Măiestrie
1
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
MF
Handy little tool
Matthew F. 18.02.2014
I bought the splitter so we could add one more microphone to our mixing desk. It worked very well for this purpose with out, as far as I can tell, colouring the sound at all. It also works well for sending a signal to two separate outputs. We've used it send the same signal to both the PA and recording equipment.

Build quality is great. It's been travelling around lose in the bottom of my equipment bag for months now and other than a few knocks and scrapes is still in good condition and working perfectly. It's proven to be a good, cheap solution for an annoying problem.
Sunet
Manipulare
Caracteristici
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Very flexible unit!
Anonim 24.07.2015
I use this box (or several of them, actually) to split the signal from the vocal microphones in our rehearsal stidio. On signal goes to the PA and the other to my Zoom R16 recorder. I have also recorded live gigs this way.
Sunet
Manipulare
Caracteristici
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate fi
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
J
Hyvä perustuote.
Juha3468 14.11.2014
Edullinen, helppo ja kompakti tuote joka tekee mitä pitää. Toimitus oli nopea eikä tuote sisällä mitään ylimääräistä. Toisin sanoen toimii. Oikean kokonsa ja kevyen rakenteen ansiosta erittäin käyttökelpoinen keikalla tai kotistudiossa. Liitännät vaikuttavat tarpeeksi jämäköiltä myös keikkakäyttöön. Suora-, sekä eristetty splitti varsinkin keikkakäytössä tarpeellinen ominaisuus.
Sunet
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz