Behringer NX3000D

59

Amplificatore di potenza a 2 canali in classe D con DSP

  • Potenza: 2 x 900 W su 4 Ohm, 2 x 1500 W su 2 Ohm
  • Ingressi: jack da 6,3 mm e XLR
  • Uscite: speaker twist
  • Caratteristiche DSP: delay, crossover (3 tipi di filtro, pendenza fino a 48 dB/ottava), equalizzatore (8 parametrici, 2 dinamici), impostazioni di sicurezza
  • Formato: 19"/2 U
  • Profondità dell'alloggiamento: 231 mm
  • Peso: 3,6 kg
In catalogo dal Settembre 2018
Numero di articolo 448418
Unità incluse 1 Pezzo
Power (4 Ohms) per Channel 900 W
Channels 2
Rack Units 2 U
Amp Class Class D
2 Ohm stable Yes
DSP/Crossover Yes
Convection cooling No
Width in mm 483 mm
Depth in mm 231 mm
Height in mm 88 mm
Weight 3,6 kg
Bridged Mode 1
Input XLR 1
Jack Input 6,3 sym. 1
Parallel Input 1
Link Out No
Output Speaker Twist 1
Mostra altro
€ 444
Spedizione gratuita, incl. IVA
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

59 Valutazioni dei clienti

4.5 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

uso

Caratteristiche

Suono

Qualità

44 Recensioni

M
Così non me lo aspettavo
MaxShane 30.04.2020
Ho poca dimestichezza con impianti con ampli e casse passive, avendo sempre utilizzato casse attive. Tuttavia, dopo aver provato un Behringer Inuke 1000, ho deciso di potenziare l'impianto con questo apparecchio. Ero molto confuso perché avevo sentito commenti disparati ed ero anche poco convinto della marca i cui prodotti li reputavo un pò giocattolosi. Devo dire, invece, che questo apparecchio mi ha colpito positivamente e mi ha fatto ricredere sul mio pregiudizio verso Behringer. Ovvio che si tratta di un prodotto a basso prezzo per la sua gamma, ma devo dire che dal punto di vista della sua resa non ha nulla da invidiare ad altri amplificatori di ditte notoriamente più stimate con prezzi più del doppio di questo. Il DSP incorporato é di estrema facilità d'uso con un Display veramente intuitivo anché per chi é un po' profano. Se la durata sarà come la resa, la mia soddisfazione sarà totale. Forse si potrà dire che io sono uno di bocca buona e che mmi accontento ma questo vi assicuro che non vero, sono sempre alla ricerca delle cose che a un giusto prezzo diano una soluzione dignitosa. Behringer 3000 DSP ha tutto questo! Grazie alla Thoman che mi ha seguito con molta professionalità soprattutto durante il servizio di consegna effettuato da corriere terzo che mi aveva un pò trascurato.
uso
Caratteristiche
Suono
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
UB
Lightweight in Kg, Heavyweight in Sound Quality
UK Beachboys 24.05.2020
I've never paid attention to the negative press Behringer used to receive and simply made my own mind up. I have 2 X X32, lots of P16 mixers so when I needed some amps for a new system I spotted these. Initially the draw was the weight, but then I noticed the digital version, and for the small increase in cost went with a couple of these - blind. My intention was to do the crossover in the X32, but once I had them in the rack, I tried the laptop programming of the crossover functions and decided that this would make the rack more versatile for multiple uses, so I just feed these amps with a L+R and leave them to do the crossover functions. Works perfectly. I'm never careful with equipment - my use of every product is heavy handed and I often break 'rules' and these appear quite happy to accept accidental no load, or simple power up by just turning on. They just work. No excessive temperatures, no annoying features. The fans are quite loud, if that's an issue, and I wish they had the choice of XLR and jack, as in some of the Thomann own brands - as you can use these for loopthroughs. On these amps I had to make up cables to do this, but it's a small point. The absolutely best feature of course is the weight - as in they weigh so little. I have a Thomann 2400 amp in the same rack. It weighs more than the two Behringers combined, plus some! The LCD screens on the front are quite narrow angle, so reading them from above or the sides can be tricky - you need to be face on to really see the detail - if like me you wear varifocal glasses, it's difficult to read without squatting down, but that's a minor point. I'll certainly buy more of these.
uso
Caratteristiche
Suono
Qualità
2
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
T
Perfect for bass transducers on my simulator rig.
Twinny 31.03.2020
Using this to drive 2x Buttkicker LFE's on my simulator. I returned a recently purchased NU1000D that I purchased from another online retailer as this was just released within the return window for not much more money.

The amp has plenty of overhead if you're not driving the LFE's at their max and this DSP version has loads of features to make sure you can get the best sound out of your setup without fear of not having enough power or damaging your equipment. Specifically bought the DSP version as the built in filters and crossovers mean I can have the granularity I need to control the audio being pushed to the transducers, which is essential when they are being used to replicate specific effects in racing or flying simulators.

Only two downsides which are more of an unfortunate design choice then an actua downside, doesn't really detract from the value:

1. Some of the DSP features are only useable through the USB interface meaning you have to have a computer connected to it for really fine tuning. You can save the patches and recall them without the PC after you have made them. Onboard menu is perfectly funtional but better off using the software when setting it up.

2. The fans are LOUD. No change here from the previous model. This is the only reason I knocked a star off quality because this thing looks and sounds great otherwise.

Will be picking up a few more of these as I acquire more transducers.
uso
Caratteristiche
Suono
Qualità
4
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
J
fake power
Jurcek 15.05.2020
RMS power measured is only a half of declared - 440W on 4 ohm.
I think that this exagerrating with declerated output power is present in all Behringer's digital amps.
Very noisy ventilators.
Software ( DSP ) is ok - the same one is used in Lab Grupen PDX3000.
Worth the money - but nothing more !
uso
Caratteristiche
Suono
Qualità
3
0
Segnala un abuso

Segnala un abuso