Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Does the job
I bought the current doubler to power a MarkBass Compressore from a T-Rex Fuel Tank Chameleon. The Mark bass Compressore requires 12 volt DC and at least 500 mA - unfortunately the T-Rex Fuel tank chameleon only has 300 mA available per isolated output. Thankfully the Chameleon can do 12v no issue. So enter the current doubler! Works perfectly. Dead quiet. No change between this and the power supply included with the MarkBass. It seems solidly made and I think it will last for as long as I need it to. One thing that I find convenient about t-Rex is that they color code everything so you can avoid making silly mistakes.
Highly recommended.
Highly recommended.
3
1
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
A handy little cable
This is a really excellent little cable which allows you to double the output from a couple of outlets from a power supply and route them into one input. I use this from a Harley Benton PowerPlant Jnr which runs my pedalboard. I take the output from two of the outlets through the T-Rex DC current doubler into its single output. This is really useful if you are using a multi-effects unit on a pedal board . Often these are digital units which draw more power than analogue pedals and the power supply can't deliver this power from one outlet. An example is how I use the cable to run into a Zoom G3 which needs 500mA and the PowerPlant Jrn can only output 250mA per outlet.
The two plugs which go into the power supply are right-angle plugs which means you can route the cable under the pedalboard and out of the way. However, the plug on the single end is a straight plug. I have knocked a star off for this as I had to purchase an extra little adapter which converts the straight plug into a right-angled one again. It would have been great to have had this adaptor in the bag with the cable so you have both options.
The two plugs which go into the power supply are right-angle plugs which means you can route the cable under the pedalboard and out of the way. However, the plug on the single end is a straight plug. I have knocked a star off for this as I had to purchase an extra little adapter which converts the straight plug into a right-angled one again. It would have been great to have had this adaptor in the bag with the cable so you have both options.
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
c
Nice long cable to power hungry pedals
Does what its supposed to do. I like the plugs as they fit snugly into just about all pedals.
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
T
Awesome!
I use this in combination with a barrel adapter to power my Line 6 HX FX with my Strymon Zuma. Works great!
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
2...for...1!
What if, you wanna power your favourite eventide stompbox using one of the best power supplies out there, t-rex chameleon?This is the pefect way for doing so! Using 2 t-rex outputs for a total of 600 mA (which is enough for operating eventide stompboxes),you are ready to rock!
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
S
High quality cable.
High quality cable, very good fit.
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
GM
Power problem solved with a good quality cable
I got one of these to all me to power my Trex Roommate 2 using a Trex Fuel Tank and do away with its dedicated adaptor. The Roommate requires 12V DC at 330mA which would overload a single outlet of the Fuel Tank which is rated at 300mA. Using this cable I can connect 2 outlets at 12V of the Fuel Tank to give plenty of headroom, with the current now doubled to 600mA at 12V. Good quality cable, however would have prefer a right angled output plug
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
G
Versatile power cable
Useful cable if you need to double the current from your power supply to a power hungry pedal on your pedal board. A good utility cable to keep handy for your pedal board setup.
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Good lead, slightly longer than the Voodoo Labs one but also slightly thinner cable
A great way to combine outputs on your power supply to create more amps (current) -NOT VOLTAGE. I used this with a Voodoo Labs Pedal Power +2 for my larger pedals. The lead is slightly flimsier than the Voodoo Labs model, but is slightly longer too and works just as well.
0
0
Segnala un abuso
