Mojotone CTS 500K Std. Split P/P VT Pot

Inizia 360°

Mostra traduzione

Potentiometer for Guitar and Bass

Integrated push/pull switch
Resistance curve: Logarithmic
Manufactured in accordance with the high quality requirements as set out by CTS
The "Vintage Taper" resistance curve of these potentiometers is between that of a standard logarithmic and that of a linear pot, enabling a more natural control response
Resistance: 500 kOhm
Finely grooved split shaft (24 splines for US guitars and pot buttons)
Shaft diameter: 6 mm
Thread length: 9.5 mm
Thread diameter: 9.5 mm
Housing diameter: 23.8 mm
Includes a washer, a tooth lock washer, and a nut

In catalogo dal Novembre 2020

Numero di articolo 494193

Unità incluse 1 Pezzo

Design Split Shaft

Resistance Value 500 kOhms

Characteristic Curve Vintage Taper

Thread Length 9,5 mm

Tandem Poti No

Push/Push Push/Pull

Solderless No

shaft type grooved

€ 13,90

IVA inclusa,€ 15 di costi di spedizione aggiuntivi

Classifica vendite

in Potenziometri e Circuiti

Comprati dai clienti che hanno visto questo prodotto

29%

comprato

Esattamente questo prodotto

€ 13,90

10%

comprato

Allparts CTS 500K Audio Taper Pot

€ 9,90

comprato

Mojotone CTS 500K Std. Split VT Pot

€ 11

comprato

TAD CTS 500K Std. Spl. P/P VAT Pot

€ 11,90

comprato

Allparts Audio Taper 500k Push/Pull Pot

€ 11

37 Valutazioni dei clienti

5 31 Clienti 4 5 Clienti 3 1 Cliente 2 0 Clienti 1 0 Clienti

4.8 / 5

Qualità

Linee guida per la valutazione

29 Recensioni

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

Excellent as a tone pot, tight fit!

Newbie Guitar Player 09.06.2022

I bought this as part of a pickup swap / rewiring job on my Squier Mustang HH. I installed it as a tone pot and wired the push-pull switch for splitting the bridge humbucker (neck position is a P90). The PCB makes it really easy to wire the P/P. There was also some space between the PCB and the pot itself to tuck in my capacitor and retain the original profile. Do beware that it is a full-sized pot and quite bulky, more so because of the P/P. Be careful and measure your guitar cavity before buying. The Mustang control cavity was a realy tight fit and I had to modify the part a bit by bending the two prongs at the top. I also routed the cables around the pot as there was no space behind/underneath it. The control plate on the Mustang is relatively thin sheet metal and the pot sticks up a bit above the surface, but that doesn't really bother me. Luckily I had no issues with the thread diameter and it dropped right into the control plate opening - no wobble, no need to enlarge the opening. For the knob I used a metal screwable one that has a smooth inside surface and is made for 6mm shaft. If you want to get a knurled knob or re-use your old knob, check your measurements and make sure it has the correct number of splines for the US standard.

Overall I am really satisfied with my purchase, even though I had some minor issues with the fitment. The pot functions well and I am happy with the tone responce I get from the vintage taper in conjunction with a 47nF capacitor. It rotates smoothly and doesn't scratch. Push-pull works as expected. As with any guitar mod, my advice is to measure carefully and be prepared to adjust some things if necessary.

Segnala un abuso

Trovate questa recensione sbagliata oppure per qualche motivo non utile? Scrivete gentilmente nel campo seguente il motivo della vostra scelta e se possibile inserite anche il vostro indirizzo email per eventuali domande.

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

Nice pot

StephanPK 27.01.2022

Big, easy to solder, but could not fit if you have small guitar cavity, so check it before you buy it

Segnala un abuso

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

High quality

Burak Oncel 16.09.2022

This cts pots are in good quality, I like them. But they are very big. You need to know is your guitar cavity big enough for cts pots if you want to buy this product.

Segnala un abuso

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

Mojotone CTS 500K Std. Split P/P VT Pot

LameGuitarist 17.11.2022

super good pot ... preoper resistance when turning and push-pull ... no wobble ... in fact only good things can be said :)

Segnala un abuso

Leggi tutte le recensioni

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Comprati dai clienti che hanno visto questo prodotto

37 Valutazioni dei clienti

Devi effettuare il login per poter lasciare una recensione.

29 Recensioni

Navigatore intelligente

Prodotti visti di recente

Acquisti e pagamenti sicuri

I tuoi vantaggi

Servizi

Servito con amore!

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Comprati dai clienti che hanno visto questo prodotto

Accessori e articoli coordinati

37 Valutazioni dei clienti

Devi effettuare il login per poter lasciare una recensione.

29 Recensioni

Confronta alternative

Navigatore intelligente