Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
D
Does the job
I'm using this with the GLM controller to control the monitors, it works well, though there's a slight lag between turning it and the volume reacting, it does not mean anything to me.
I am unimpressed with the thin wire and 3.5mm TRS jack, I'm afraid the wire or jack (in the GLM box) will break in time. On the positive note, it's just a 10K log potmeter, so it should be easy to fix.
The knob is heavy and won't slide around the table.
It has hard-stops at each ends of the scale, I hope these stops are made in iron and not just the potmeter reaching its ends.
It would have been nice if there was a way to adjust the hard-stop to something less than max volume to avoid accidents.
I am unimpressed with the thin wire and 3.5mm TRS jack, I'm afraid the wire or jack (in the GLM box) will break in time. On the positive note, it's just a 10K log potmeter, so it should be easy to fix.
The knob is heavy and won't slide around the table.
It has hard-stops at each ends of the scale, I hope these stops are made in iron and not just the potmeter reaching its ends.
It would have been nice if there was a way to adjust the hard-stop to something less than max volume to avoid accidents.
1
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
T
Useful thing
An excellent addition for a calibration system, you can put it in front of your hand and you don’t need to reach far to the volume control, I liked it so much that it weighs almost a kilogram with this size, in general, a cool thing!
1
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
S
for the new Genelec speakers
Instead of reaching for the UAD-apollo monitor level knob having a dedicated desktop Genelec volume control makes all the difference so as to enjoy the Genelec 8351 sound without performing uncomfortable moves. Beautiful aesthetically and solid like the speakers . Practical and relatively cheap. How I managed without it is the question .
2
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
j
I feed digital signals to 8331s from my PC through a USB digital interface. To preserve dynamic range, I only use the knob to control volume in the digital domain.
Pros:
The knob is heavy so I can control volume with just a finger.
Cons:
It has no step and it would slide occasionally for 0.1-0.5 db. To have a fixed volume level, you may save current level to GLM.
The knob does its job but it will be better if come with a mute button.
Pros:
The knob is heavy so I can control volume with just a finger.
Cons:
It has no step and it would slide occasionally for 0.1-0.5 db. To have a fixed volume level, you may save current level to GLM.
The knob does its job but it will be better if come with a mute button.
1
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
It does the job
I use this to control my 8260a monitors.
Its well built! I dropped it once on a wood floor and it suffered no damage.
Its smooth. Nice to turn!
Sadly, there is no registration for the control's position, other than referencing the dip on top with the cord coming out of the back. A few, minimal, tic marks would have been nice.
A couple small strips of colored tape fixes this problem to a degree.
Its well built! I dropped it once on a wood floor and it suffered no damage.
Its smooth. Nice to turn!
Sadly, there is no registration for the control's position, other than referencing the dip on top with the cord coming out of the back. A few, minimal, tic marks would have been nice.
A couple small strips of colored tape fixes this problem to a degree.
1
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
D
Good but not great
I wanted to get the volume controler so I don't have to reach for the mixer volume fader every time.
It's pretty robust.
The metal parts when you turn the know seems to be rubbing each other which is not a big deal but it could be more smooth for it's price.
The volume also has a certain latency (atleast in my case) and it takes a few miliseconds for the volume to reach desired position.
If you need something that's within a hand'ss reach I would recommend it.
It's pretty robust.
The metal parts when you turn the know seems to be rubbing each other which is not a big deal but it could be more smooth for it's price.
The volume also has a certain latency (atleast in my case) and it takes a few miliseconds for the volume to reach desired position.
If you need something that's within a hand'ss reach I would recommend it.
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
U
Heavy but imprecise machining
The box in which I've received it was previously open. The knob itself is heavy and most likely made of cast aluminum. I was expecting a noise and friction-free(metallic grinding) operation but I was wrong - it isn't as smooth as other volume controllers on the market, such as the Pilot X (which is also, coincidentally, 20 euro cheaper and better built). But since it's our only wired option to control the GLM kit (without a computer), it is what it is..
Later edit: Thomann has provided me with a replacement and this one works properly. Thanks!
Later edit: Thomann has provided me with a replacement and this one works properly. Thanks!
0
1
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
S
Big and sturdy volume knob. Love it!
It costs a few Euros but once you unpack it you know it's worth it. Butter smooth volume control on your desk.
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
Gr
Love it
I use it with GLM on a computer desk and I love it. Much better than digital volume of a streamer.
0
0
Segnala un abuso
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
K
It does the job, but it was keeping one of my speakers awake and not letting it go to sleep mode. Caused me a lot of headache trying to figure out the cause. The moment I disconnected it, the ISS function worked properly.
Build wise, it's pretty hefty and has a nice weight. 2 stars subtracted since it was introducing noise into one of my speakers.
Build wise, it's pretty hefty and has a nice weight. 2 stars subtracted since it was introducing noise into one of my speakers.
0
0
Segnala un abuso
