Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
A
more B88 than B84
Received this B84 blank plate but it was oversized by 4mm (B88??); luckily I had the tools to trim to the correct size and replace the screw holes - I did not have time to send this back, and it wasn't Thomann's fault anyway.
Very surprised as all of my previous Doepfer plates fit perfect, although this is a new size so teething/quality problems?
From Doepfer\'s website :
Remark #2: The back panel cannot be used as a 84 HP blind panel at the front side of the A-100 frame. The panel is a bit longer than 84 HP to cover the rear side of the A-100G6 metal frame completely. For this purpose two 42 HP blind panels have to be used (see above).
Very surprised as all of my previous Doepfer plates fit perfect, although this is a new size so teething/quality problems?
From Doepfer\'s website :
Remark #2: The back panel cannot be used as a 84 HP blind panel at the front side of the A-100 frame. The panel is a bit longer than 84 HP to cover the rear side of the A-100G6 metal frame completely. For this purpose two 42 HP blind panels have to be used (see above).
4
0
Signaler l'évaluation
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
N
Not quite 84HP!
This is larger than 84HP but it's easy to cut down to size and re-drill holes if you need to make it smaller
0
0
Signaler l'évaluation
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
R
Great Service
Very Basic part but helped me convert an old chassis into a usable unit.
0
0
Signaler l'évaluation