• Önskelista
  • Välj din butik Select Store
    Alla länder All Countries
  • 0

Den stora Thomann Online-Rådgivaren: Bass Effect Pedals

7. Hotdeals

On this page you can find our current Hotdeals on Bass Effects:

Gitarr preamps

Kemper Profiling Amplifier Rack BK
Kemper Profiling Amplifier Rack BK
19 "Guitar PreampSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+
  • Format: 19 "/ 3 U
  • Dimensions (W x H x D): 48.3 x 13.9 x 22 cm
  • Weight: 5 kg
Kemper Profiling Amplifier Rack BK 19 "Guitar PreampSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+ Format: 19 "/ 3 U Dimensions (W x H x D): 48.3 x 13.9 x 22 cm Weight: 5 kg Colour: Black Mic input Line In Alternative input Direct Out Monitor Out Master Out: TRS S / PDIF digital input and output Midi In / Out / Thru 2x footswitch (jack) Network
1 699 €
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 6 kg
Kemper Profiling Amp PowerHead Set Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm) Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 6 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic Input Line In Alternative Input Direct Out Monitor Out Master Out (Jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (Jack) Network USB
2 555 €
Palmer Pocket Amp Bass
Palmer Pocket Amp Bass
Bass Preamp
  • For practicing, recording and performing
  • For active and passive basses
  • 3 Sound modes: Clean, Overdrive and Fuzz
Palmer Pocket Amp Bass Bass Preamp For practicing, recording and performing For active and passive basses 3 Sound modes: Clean, Overdrive and Fuzz 3-Band equalizer which has been specifically tuned for bass guitar and with semi-parametric mid control Output DI or with speaker emulation Effects loop Controls: Bass, Mid Level, Mid Freq, Highs, Drive, FX Blend, Saturate and Volume Connections: Bass input with pad switch, headphones, AUX In, Bass Thru, XLR DI Out, Amp Out with ground lift, FX insert Aluminium diecast housing Powered with optional 9V battery or 9V DC power supply (e.g., Article Nr #108096# - not included)
149 €
189 €
Kemper Profiling Amplifier Head WH
Kemper Profiling Amplifier Head WH
Kemper Profiling Amplifier Head WH, the Kemper profiling technology allows you to take a precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such...
1 699 €
Kemper Profiling Amplifier PowerRack
Kemper Profiling Amplifier PowerRack
Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+
  • Power rack version with 600 watt class D amplifier
  • Power: 600 watts into 8 ohms, 300 watts into 16 ohm
  • Format: 19 "/ 3 HE
Kemper Profiling Amplifier PowerRack Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+ Power rack version with 600 watt class D amplifier Power: 600 watts into 8 ohms, 300 watts into 16 ohm Format: 19 "/ 3 HE Dimensions (W x H x D): 48.3 x 13.9 x 22 cm Weight: 6.18 kg Color: Black Mic input Line In Alternative input Direct Out Monitor Out Master Out (jack S / PDIF digital input and output Midi In / Out / Thru 2 x footswitch (jack) Network
2 111 €
Kemper Profiling Amp Rack BK Set
Kemper Profiling Amp Rack BK Set
Kemper Profiling Amplifier Rack BK + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U
  • Weight: 4.5 kg
  • Colour: Black
Kemper Profiling Amp Rack BK Set Kemper Profiling Amplifier Rack BK + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U Weight: 4.5 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic input Line In Alternative input Direct Out Monitor Out Master Out (Jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (jack) Network USB
2 159 €
Kemper Profiling Amplifier PowerHead
Kemper Profiling Amplifier PowerHead
AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort. @+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires. @+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet. @+@+
  • Powerhead version with 600 watt class D amplifier
  • 600 watts into 8 ohms, 300 watts into 16 ohm
  • Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
Kemper Profiling Amplifier PowerHead AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort. @+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires. @+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet. @+@+ Powerhead version with 600 watt class D amplifier 600 watts into 8 ohms, 300 watts into 16 ohm Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm Weight: 6.5 kg Colour: Black@+*Connections:*@+@+ Mic input Line In Alternative input Direct out Monitor out Master out (Jack & XLR) S / PDIF digital input and output Midi In / Out / Thru 2 x footswitch (jack) Network & USB
2 111 €
Kemper Profiling Amp PowerRack Set
Kemper Profiling Amp PowerRack Set
Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
  • Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U
  • Weight: 5.5 kg
Kemper Profiling Amp PowerRack Set Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm) Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U Weight: 5.5 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic Input Line In Alternative Input Direct Out Monitor Out Master Out (jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (jack) Network USB
2 555 €
Behringer V-Tone Bass BDI21
Behringer V-Tone Bass BDI21
Behringer V-Tone Bass BDI21 - analog modeling bass pre-amp/stompbox with DI recording output, authentic V-Tone modeling technology capable of dialing up big vintage tube tones, funky slap sounds, crunchy distortions and anything in-between, provides a truckload of great amps in a single stomp box from...
29 €
36,89 €
Kemper Profiling Amp PowerRack Bundle
Kemper Profiling Amp PowerRack Bundle
containing:
  • Kemper Profiling Amp PowerRack Set
  • Thon Double Door Amp Case
  • Wizoo Publishing Kemper Profiler Guide
Kemper Profiling Amp PowerRack Bundle containing: Kemper Profiling Amp PowerRack Set Thon Double Door Amp Case Wizoo Publishing Kemper Profiler Guide
2 759 €

Bas multieffekter

Zoom B1Xon
Zoom B1Xon
Multieffect for Electric Bass
  • 75 Bass effects including distortion, dynamics effects, modulation effects as well as reverbs, delays and many amp models
  • 30-second looper in CD quality
  • 5 effects can be used simultaneously
Zoom B1Xon Multieffect for Electric Bass 75 Bass effects including distortion, dynamics effects, modulation effects as well as reverbs, delays and many amp models 30-second looper in CD quality 5 effects can be used simultaneously 100 Storage spaces Easy preselection of preset via preselect feature Built-in drum machine with 68 drum patterns AUX IN for external audio sources Large illuminated LCD display, USB port for firmware updates Power supply via 4 x AA batteries (approx. 20 h operation time) or optional mains connector (eg article #108096# - not included in purchase) Dimensions (D x L x H): 155 x 237 x 50 mm
66 €
86,11 €
Boss ME-50B
Boss ME-50B
Multi-effects pedal for bass with easy operation@+Easy to set up = simply brilliant! The worldwide phenomenal success of the ME-50 guitar multi-effects processor has proved that the new concept from BOSS really works: multi-effects devices with a rotary control for every setting - no menus, no programming, only sound and fun!@+@+@+The ME-50B has been constructed in much the same way: As with a chain of individual effects units everything is easily adjusted by hand, but the device is more compact, versatile and cheaper than a suitcase full of individual pedals - ideal for bassists! Brand new features are the "Octave Up" effect (adds a note one octave above the original with adjustable drive), "Hi Band driver" (distortion only in the treble, bass remains clean), and the "Sound Hold" effect (lets you endlessly sustain a low note while playing over it).@+@+
  • The simplest operation set-up of all time - Rotary knobs for all settings!
  • 23 Different effects in the best BOSS quality with new effects "Octave up", "Hi Band driver" and "Sound Hold"
  • Built as an effect chain ( manual mode) with three on/off switches; can be switched to memory mode (with 24 memory locations)
Boss ME-50B, Basmultieffektprocessor, 24 bit AD/DA, 44.1 kHz samplings frekvens, 23 olika effekter i bästa BOSS kvalité med "octave up", manual mode med tre on-/off- knappar, justerbart memory mode med 24 lagringmöjligheter, kompressor/limiter-med modellering av legendariska kompressorpedaler, EQ med parametrisk mellanregister, expressionpedal med bas wah och 5 andra funktioner, inkluderar stämapparat, dimensioner: 384 x 225 x 78 mm, Vikt: 3,2 kg, möjlig batteridrift (6x Mignon AA-storlek), tillbehör nätadapter: Boss PSA-230 (artikelnr: 102842)
311 €
329 €
Tech 21 Bass Fly Rig
Tech 21 Bass Fly Rig
Multi-effects device for bass
  • Sections: SansAmp, Octafilter, Chorus, Comp
  • With Boost and Tuner
  • The headphone button switches the jack output into headphone mode
Tech 21 Bass Fly Rig Multi-effects device for bass Sections: SansAmp, Octafilter, Chorus, Comp With Boost and Tuner The headphone button switches the jack output into headphone mode 6.3 mm Jack input with 4.7 megohms to deliver the full sound of piezos Low impedance 6.3 mm jack input for active basses Robust metal housing Metal foot switches and sockets Mute switch Dimensions: 318 x 64 x 32 mm Weight: 586 g Incl. DC power supply (9V, 200 mA)
399 €
474,81 €
Zoom B1on
Zoom B1on
Multieffect for Electric Bass
  • 75 Bass effects including distortion, dynamics effects, modulation effects as well as reverbs, delays and many amp models.
  • 30-second looper in CD quality
  • 5 effects can be used simultaneously
Zoom B1on Multieffect for Electric Bass 75 Bass effects including distortion, dynamics effects, modulation effects as well as reverbs, delays and many amp models. 30-second looper in CD quality 5 effects can be used simultaneously 100 Storage spaces Easy preselection of preset via preselect feature Built-in drum machine with 68 drum patterns AUX IN for external audio sources Large illuminated LCD display USB port for firmware updates Power supply via 4 x AA batteries (approx. 20 h operation time) or optional mains connector (eg article #108096# - not included in purchase) Dimensions (D x L x H): 155 x 146 x 43 mm
58 €
70,21 €
Zoom Multi Stomp MS-60B
Zoom Multi Stomp MS-60B
Bass Multi-effects
  • Simultaneously usable up to 4 effects
  • Stable cast housing
  • 50 Presets
Zoom Multi Stomp MS-60B Bass Multi-effects Simultaneously usable up to 4 effects Stable cast housing 50 Presets 52 Effects 6 Amp models Integrated Tuner 7 Hours Powered by 2x AA batteries or additionally available power supply ZOOM AD16E Power Supply Art. #105835# Weight without batteries 350 grams
98 €
141,61 €
Boss ME-20B
Boss ME-20B
Bass Multi-Effects
  • Robust metal housing
  • 30 User memory locations
  • Bass Enhance function
Boss ME20B multieffekt för bas- 30 user presets, bass enhance funktion, enkel edit funktion, drivs med 6 x AA batterier (inkl.) eller tillbehör nätadapter (artikelnr: 102842 eller 108096)
219 €
229 €
Zoom B1Xon Bundle
Zoom B1Xon Bundle
containing:
  • Zoom B1Xon
  • Thomann NT AC/PSA
Zoom B1Xon Bundle containing: Zoom B1Xon Thomann NT AC/PSA
73 €
103,91 €
Vox amPhones Bass
Vox amPhones Bass
Headphones with internal amPlug technology
  • Versatile usage via the bassilator circuit, which simulates the resonances of the speaker cabinet and floor
  • VOX's Valve Reactor technology for a dynamic sound
  • Headphones from Audio Technica
Vox amPhones Bass Headphones with internal amPlug technology Versatile usage via the bassilator circuit, which simulates the resonances of the speaker cabinet and floor VOX's Valve Reactor technology for a dynamic sound Headphones from Audio Technica Compressor Controls for gain, tone, volume Effects switch for standby Direct connection to the instrument by 6.3 mm jack plug Headphones can be conventionally used when the amPhone is switched off AUX input for CD / MP3 player via mini jack Power supply via 2x AAA batteries (included) Weight: 230 g without batteries Includes adapter: 3.5 mm to 6.3 mm
90 €
Boss ME-20B Bundle
Boss ME-20B Bundle
containing:
  • Boss ME-20B
  • Gator G-Mix-B 1815
  • the sssnake GKP6
Boss ME-20B Bundle containing: Boss ME-20B Gator G-Mix-B 1815 the sssnake GKP6 Hama HK-5618
261 €
356,90 €
Boss ME50B Bundle
Boss ME50B Bundle
containing:
  • Boss ME-50B
  • Gator G-Mix-B 1815
  • the sssnake GKP6
Boss ME50B Bundle containing: Boss ME-50B Gator G-Mix-B 1815 the sssnake GKP6 Hama HK-5618
366 €
401,80 €

Övriga elgitarrer effekter

Source Audio Programmable EQ
Source Audio Programmable EQ
Effect Device
  • EQ
  • 7 Freely programmable bands (125Hz - 250Hz - 500Hz - 1kHz - 2 kHz - 4 kHz - 8kHz)
  • +/- 18dB per band
Source Audio Programmable EQ Effect Device EQ 7 Freely programmable bands (125Hz - 250Hz - 500Hz - 1kHz - 2 kHz - 4 kHz - 8kHz) +/- 18dB per band Optional frequency band at 62 Hz for bass Hardwire true bypass MIDI compatible 56-bit digital processor 24-bit converter Aluminium housing Dimensions (H x W x D): 51 x 64 x 114 mm Requires 9V battery or optional 9V power supply
129 €
176,35 €
Source Audio AfterShock Bass Distortion
Source Audio AfterShock Bass Distortion
bass distortion effect pedal, 3 different distortion types selectable via toggle switch: tube – subtle / but powerful vintage tube overdrive / heavy – intense germanium fuzz tones with loads of bottom and mucho grit / fuzz – zipper-like gated fuzz, stereo ins and outs:...
149 €
211,65 €
Source Audio Soundblox Pro Bass Envelope
Source Audio Soundblox Pro Bass Envelope
Bass Effects Device
  • 23 Envelope/ phaser sounds
  • Knobs for effect selection, sweep range, frequency, speed and mix
  • Pressure switch to select the preset bank
Source Audio Soundblox Pro Bass Envelope Bass Effects Device 23 Envelope/ phaser sounds Knobs for effect selection, sweep range, frequency, speed and mix Pressure switch to select the preset bank The modulation source and the tap tempo 6 Programmable memory slots 7-Band EQ Ultramodern DSP source audio 56-bit digital signal processor and crystal clear 24-bit converters Active analogue bypass Power supply via battery or optional AC adapter For the connection of soundblox effects with other Source Audio effects the sensor connection cable (SR SA 160) is required Including power adapter Motion control All soundblox pedals hot hand® compatible and can be used with any hot hand® sensor to expand the resources
149 €
294 €
EBS MultiComp SE
EBS MultiComp SE
Effect Pedal for Electric Bass@+The Swedish company EBS has existed since 1988. It caters primarily to the needs of bass players, and since the staff is rumoured to consist of bass players themselves, it is not surprising that products are developed to leave the hearts of bassists excited.@+@+@+Especially with regard to effects devices, bass players were most often neglected. A major problem has always been the fact that most effects deteriorate the frequencies precisely in the range that is crucial for proper bass guitar sound, namely in the low frequencies. So it is of little surprise, that the EBS-effects are really unproblematic in that area and otherwise have a lot of really interesting features to offer as well.@+@+
  • Compressor
  • 3 Switchable compression modes: Tubesim/multiband/normal
  • Controller: Comp/Limit
EBS MultiComp SE Effect Pedal for Electric Bass@+The Swedish company EBS has existed since 1988. It caters primarily to the needs of bass players, and since the staff is rumoured to consist of bass players themselves, it is not surprising that products are developed to leave the hearts of bassists excited.@+@+@+Especially with regard to effects devices, bass players were most often neglected. A major problem has always been the fact that most effects deteriorate the frequencies precisely in the range that is crucial for proper bass guitar sound, namely in the low frequencies. So it is of little surprise, that the EBS-effects are really unproblematic in that area and otherwise have a lot of really interesting features to offer as well.@+@+ Compressor 3 Switchable compression modes: Tubesim/multiband/normal Controller: Comp/Limit Gain and 3-way mode selector True bypass Dimensions (W x L x H): 70 x 115 x 35 mm Weight: 400 g Power consumption: 35mA 9 - 12 V DC power supply (Not included - Item #108096#)
169 €
EBS Octabass SE
EBS Octabass SE
Stomp Box For Bass
  • Analog octaver
  • The fastest octaver on the market
  • Produces a single note one octave below the note played
EBS Octabass SE Stomp Box For Bass Analog octaver The fastest octaver on the market Produces a single note one octave below the note played True bypass Power supply via 9 V power supply (not included - for example, type #108096#)
145 €
Vox Amplug 2 Bass
Vox Amplug 2 Bass
Compact headpgone amplifier for electric bass
  • Version: Bass
  • 9 x Integrated rhythm patterns
  • Integrated 6.3 mm jack for direct connection onto the bass
Vox Amplug 2 Bass Compact headpgone amplifier for electric bass Version: Bass 9 x Integrated rhythm patterns Integrated 6.3 mm jack for direct connection onto the bass 3.5 mm Headphone connector Aux in for MP3 players Foldable plug Operational life: Up to 15 hours with 2x AAA batteries (not included) Dimensions (W x H x D): 86 x 31 x 80 mm Weight: 40 g
40 €
Darkglass Microtubes B7K Bass Overdrive
Darkglass Microtubes B7K Bass Overdrive
Bass Overdrive/Preamp Effect Pedal
  • Of classic overdrive to Ultra Hi Gain Distortion
  • Built DI output for Live and Studio
  • Controls for level, blend, drive, grunt switch, attack switch
Darkglass Microtubes B7K Bass Overdrive Bass Overdrive/Preamp Effect Pedal Of classic overdrive to Ultra Hi Gain Distortion Built DI output for Live and Studio Controls for level, blend, drive, grunt switch, attack switch Low: +-12 dB @ 100 Hz Mid: +-12 dB @ 1 kHz Hi Mid: +-12 dB @ 2.8 kHz Treble: +-12 dB @ 5 kHz Parallel output Gnd lift Original Hybrid FET/CMOS gain stages Power supply with 9V DC power supply (not included - optional available under Article Nr #108096#) Made in Finland
339 €
Darkglass Microtubes B7K Ultra
Darkglass Microtubes B7K Ultra
Darkglass Microtubes B7K Ultra effectpedal, bass overdrive/preamp, control for master volume, blend, level, drive, bass +-12DB, low-mid +-12DB, toggle switch 250HZ, 500HZ and 1KHZ, hi-mid +-12DB toggle switch 750HZ, 1.5KHZ, 3KHZ., treble +-12DB, switches for grunt, attack, direct output for studio and recording, footswitch for...
422 €
Lehle Basswitch Dual Band Compressor
Lehle Basswitch Dual Band Compressor
Electric Bass Effects Pedal
  • Dual Band Compressor
  • Intelligent coupling of parameters such as attack and release
  • Adjustable ratio
Lehle Basswitch Dual Band Compressor Electric Bass Effects Pedal Dual Band Compressor Intelligent coupling of parameters such as attack and release Adjustable ratio Threshold & crossover frequency of the two compressors Controller: Volume, gain, comp & freq Bypass mode selectable between true bypass and buffered mode Suitable for passive and active basses Soft knee characteristic for smooth transitions Rugged metal housing with protected controllers Robust switching mechanism by mechanical decoupling Power supply with a 9-15 V DC or AC power adapter (coaxial connection - minus on the inside, not included) matching power supply available under Article Nr #108096#)
239 €
295 €
Digitech DOD Meatbox SubSynth
Digitech DOD Meatbox SubSynth
Digitech DOD Meatbox SubSynth, Subharmonic Synthesizer and Low-End Enhancer effects pedal, for electric bass & guitar, modernized reissue of the 90s dod meatbox, fully analog, all sounds from the 90s vintage version, from a gentle bass boost up to strongest bass attacks, bass boosts or...
148 €
176,35 €
Din kontaktperson
Tel +49-9546-9223-20
Fax +49-9546-9223-24
Beställ en gratis Hot Deal!

Över 7.900.000 musiker prenumererar redan på Thomann Hot Deals. Börja prenumerera gratis och få tillgång till mer än 500 aktuella erbjudanden!

Hot Deals
ett Thomann-fan
Wie immer zuverläßig und unkompliziert. Weiter so !!!
okänd, 10.10.2014

Bass Effect Pedals översikt

(1)
(2)
(12)
(1)
Feedback

Har du hittat ett fel eller vill ge oss feedback om denna sida?

Vi ser fram emot att höra från dig och kommer att lösa eventuella problem så snart vi kan.

avbryt