Jaspers 4D-145B

81

Keyboard Stand

  • For 4 keyboards
  • Made of black powder-coated aluminium
  • Height: 140 cm
  • Width: 155 cm
  • Inner width: 145 cm
  • Maximum adjustable depth: 70 cm
  • With hand wheels
  • The lower section, reinforced by a second tube, has a pair of 60 cm long supports and is also suitable for particularly heavy keyboards
  • The other supports are 40 cm long
  • Load capacity: Lower shelf up to 40 kg / upper shelves up to 15 kg (or more, with shelf reinforcement as below)
  • All shelves are height-adjustable and tiltable
  • Can also be folded for transport
  • Made in Germany
  • Suitable accessories: Additional pairs of shelves, monitor support, micro swivel arm, music stand, laptop shelf (not included)
Tillgänglig sedan Mars 2005
Artikelnummer 176571
försäljningsenhet 1 Styck
Keyboard Supports 4
3 333 kr
Alla priser inklusive moms
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Gratis frakt. Beräknad leverans mellan Torsdag, 4.04. och Fredag, 5.04.
1

81 Kundbetyg

4.7 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

stabilitet

funktion

hantverkskvalitet

57 Recensioner

E
YEAH
Erikgproduction 29.09.2018
Just yes!! This stand is amazing. Easy too build, takes (considering the size) not too much space and you can store all of your favourite keyboards on it.
I currently have a Kurzweil Pc3x 88 on the lower shelf which is a heavy keyboard. Works perfectly. Then I also have a DSI Prophet rev 2, Nord Stage 2 and a Moog Voyager and everything works great.
Just make sure too tighten the screws more then once! Once when I played my Kurzweil quite hard the arms tilted down in my lap...could have been a nasty accident but more a "Brain-dead user" issue then anything else lol...BUY it. It's almost free!
stabilitet
hantverkskvalitet
funktion
0
0
Anmäl recension

Anmäl recension

P
Ponchomondo 15.09.2021
Jag sålde den till någon annan direkt!
Jag tyckte den var för klumpig!
stabilitet
hantverkskvalitet
funktion
0
0
Anmäl recension

Anmäl recension

W
Great product
Wooster101 21.06.2021
A very well built stand with great fit. It can take some time before you have found all the correct heights and angles for your synths but it is worth the time as it is a great quality product and very stable.
stabilitet
hantverkskvalitet
funktion
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
MG
Works!
M Gho 30.11.2020
Works Perfectly

Only "issue" is that it takes a while to setup

I suggest you prepare the following
1) Cordless Drill with the correct HEX BIT (you will adjusting the fittings a lot)
2) Measuring Tape. This is the only way to get things aligned properly. Make sure each T-fitting is the same distance from the floor (for the left and right A stand) so you end up with a perfect stand
3) Bubble Level. Make sure all your horizontal tubes are level. Also when you are adjusting the holders, You can use the level to make sure the 2 holder arms are parallel. I used an iPhone App, but a bigger physical bubble level will be more useful
4) make sure you jam the fitting into the horizontal bar then u use the locking clamp to make sure it does not twist. Once you do one side, repeat on the other side. Make sure while u are jamming the opposite side, the original side does not pop up. I was lucky my 88 key piano did not drop down the next day. Again double check
stabilitet
hantverkskvalitet
funktion
3
0
Anmäl recension

Anmäl recension

Passande från YouTube