Gewa Tablet Holder 7" - 10,1"

72

Universal tablet device holder

  • Suitable for almost all tablet computers with dimensions of 7" up to 10.1"
  • Mounting to a (microphone) stand is via a 5/8" thread or tripod / stand mounting is by means of an enclosed tube clip (10 - 25 mm tube diameter)
  • Infinitely rotatable and inclinable (no fixed increments or steps)
  • All connectors on the device remain freely accessible
Tillgänglig sedan Mars 2017
Artikelnummer 409994
försäljningsenhet 1 Styck
Type Mounts
Type Of Keyboard Stand iPad holder
Colour Black
suitable for Universal
Diagonal of 7"
Diagonal up to 10,1"
Fastening Stand clamp
Rotating 1
Visa mer
281 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Torsdag, 4.04. och Fredag, 5.04.
1

72 Kundbetyg

4.5 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

stabilitet

hantverkskvalitet

46 Recensioner

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
J
Good tablet holder
JSze 09.02.2020
The tablet holder clips on to just about any mic stand provided by the various venues I play at, and it's nice and stable so my iPad stays in place. While I would have liked if it could be less bulky when collapsed, I have absolutely no complaints about the functionality of the product. It does what it sets out to do just fine, and I'd get another in the unlikely event that mine fails on me.
funktion
stabilitet
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
T
Almost great
Timddeb. 12.12.2018
The item does what it says on the packet, however I feel it would be easy to make this much better due to a few design faults. Why? Well the screw thread to attach the holder onto the mike stand is tapped into mild steel of a lot less than the diameter of the thread. The bracket it is tapped through is more than adequate for the job of holding up the tablet, but too thin (around 3 or 4mm) for the more than ocasional use of the screw. A nut welded to the hole would improve this situation enormously, and a mod I am sure I will have to make before relying on this item for gigging. The thread for holding the actual adjustable holder is quite a large diameter, around 15mm so no worries there, although the actual thread is quite fine. Be carefull if you need to reattach it as it will be easy to cross thread it. The rotation of the holder for vertical/horizontal is a friction affair, and I can see a nut hidden away. Once it goes slack I will need to do a partial dismantle to be able to access this, and I hope the head of the screw is captive as the decorative cover over it seems well attached. The tablet needs to be firmly attached to ensure it does not drop out if you turn the orientation to horizontal. SO make sure you clamp it in tight. Overall I feel that a few minor changes could improve this item enormously. I have given four stars for handling and stability, this is a bit of a guess. Out of the box this is great. After a few weeks of use I am pretty certain it is going to be a bit tricky. As many of us use our tablets for more than just displaying music/lyrics these days the wear and tear is going to impact on the stand quite quickly. I am going to use this until I find something better.
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
W
The materials are good, the weight / balance? Not so much
Wrench 27.04.2020
Bought this bad boy to fix it to a sheet music stand for the wife to place her iPad in front of the kit. The projection is a bit too far for the small diameter pipe it is meant to be fixed to so balance and stability are not great. The actual make of it is not bad though. Just be aware that you need a very stable stand to keep it from wiggling and tipping over.
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
T
Great Product
TimWears 06.06.2017
A high-quality product that holds iPads (and other tablets) securely in place without scratching or damaging them. The clamp that attaches to the microphone stand is very robust, giving a high level of confidence in the product. The tablet can be angled to face any conceivable direction, which is very helpful.

The tablet can be fitted in the holder quickly and easily, but the holder isn't spring loaded - adjustments are manual.
0
0
Anmäl recension

Anmäl recension