Gator GR-STUDIO-4U

56

19" Studio Rack

  • MDF panel
  • 3.2 mm Steel rack rails
  • External dimensions (L x W x H): 406 x 521 x 216 mm
  • Inner dimensions (L x W x H): 381 x 483 x 178 mm
  • Weight: 9.98 kg
  • Colour: Black

Note:The rack rails are provided with inch threads - suitable screws: Article number 449210 (not included)

Tillgänglig sedan Juli 2017
Artikelnummer 408829
försäljningsenhet 1 Styck
usable height in U 4 U
Material MDF
Wheels No
Special Design Desktop Unit
888 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Onsdag, 24.04. och Torsdag, 25.04.
1

56 Kundbetyg

3.8 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

stabilitet

hantverkskvalitet

41 Recensioner

C
You get what you pay for
CraniumGuy 06.10.2017
I was not expecting a top notch rack and it fills the purpouse as long as you find the proper rack bolts and nuts (the ones I had did not work, I believe these are 5mm). The build quality is still fairly poor and its not made of MDF as the product description implies but rather chipboard. The veneer was not glued properly and comes loose.
stabilitet
hantverkskvalitet
3
0
Anmäl recension

Anmäl recension

I
Iram 05.11.2017
the black paint comes off quite easily so it will eventually look worn out, especially if you keep changing the gear you put in. Other than that its not too bad, gets the job done, easy to put together and looks decent.
stabilitet
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

K
Good
Kyro 14.10.2020
A very good rack for the price.
stabilitet
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
m
A pile of chipboard with a decent rack rail.
makoivis 22.10.2018
It's four pieces of chipboard with a rack rail attached. Sadly these aren't captive nuts, so you will need 10-32 rack screws, but 5mm rack screws will also work. Other than that the rack rail is good.

The chipboard is garbage though. As a tip, leave the screws slightly loose until you fit all the gear in, then tighten. Otherwise the pieces won't sit straight.

It's really not very good, doesn't seem the slightest bit durable, but at least it's cheap and won't take up much space.
stabilitet
hantverkskvalitet
6
0
Anmäl recension

Anmäl recension