Doepfer A-162

Dual Trigger Delay

  • Allows delayed output of the input signal
  • Power requirement: +40 mA (+ 12V) / -0 mA (-12V)
  • Width: 8 HP / 40.3 mm
  • Depth: 45 mm (measured from the back of the front panel)

Detta är andra kunders val:

Kunder som tittat på denna produkt, har köpt dessa:

Doepfer A-162
32% köpte exakt denna produkt
Doepfer A-162
Tillgänglig
Tillgänglig

Denna artikel finns i lager och kan skickas ut omgående.

Information om leveransen
64 € Lägg i varukorgen
Doepfer A-160-2 Clock Divider II
20% köpte Doepfer A-160-2 Clock Divider II 99 €
Doepfer A-160 Clock Divider
14% köpte Doepfer A-160 Clock Divider 64 €
Doepfer A-167
10% köpte Doepfer A-167 59 €
Doepfer A-160-5 VC Clock Multiplier
9% köpte Doepfer A-160-5 VC Clock Multiplier 99 €
Vår mest populära Clock -,Trigger-Moduler
11 Kundbetyg
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 / 5.0
Recensioner på denna produkt finns än så länge bara på ett annat språk
6 skrivna ratings Läs alla recensioner
gb Automatiskt översatt (Visa original)
gbUrsprunglig recension (Visa översättning)
Tyvärr uppstod ett fel. försök igen senare.
Totalt

trigger delay with huge range

24.10.2016
A dual module that offers a number of possibilities. I use it to adjust the gate time of a clock signal or to divide down the clock signal (these are both done with just the gate length control). With a logic module interesting rhythms can be created very simply and with asymetrical patterns or swing. I also use it to add delayed vibrato and other modulations to my sounds. The delay can be exceptionally long as can the gate length. And of course the all important LEDs to let you know what the module is doing.

I have only rated the sound as okay as this module doesn't produce or modify sounds itself (although if you put an audio signal through it you get a really crunched up distortion!)
Hjälpsam · Inte hjälpsamt · Anmäl recension
Rapportera betyg

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning?

Skicka rapport
gb Automatiskt översatt (Visa original)
gbUrsprunglig recension (Visa översättning)
Tyvärr uppstod ett fel. försök igen senare.
Totalt

LiamJ, 12.02.2015
Been needing a delay for my modular synth for a few months, finally picked one up and so glad I went for the Doepfer delay, 2 triggered delays in an 8hp module, both sound really nice, adds a nice depth to plucks made via the modular synth, no complaints from me, can see this being used in a load of patches from now on.
Hjälpsam · Inte hjälpsamt · Anmäl recension
Rapportera betyg

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning?

Skicka rapport
Visa variationer för denna produkt
Doepfer A-162
(11)
Doepfer A-162

Dual Trigger Delay Allows delayed output of the input signal, Power requirement: +40 mA (+ 12V) / -0 mA (-12V), Width: 8 HP / 40.3 mm, Depth: 45 mm (measured from the back of the front panel)

Doepfer A-110-1
(62)
Doepfer A-110-1
Till produkter
139 €

Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...

Doepfer A-124 Wasp Filter SE
(34)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

Doepfer A-138s Mini Stereo Mixer
(7)
Doepfer A-138s Mini Stereo Mixer

Mini Stereo Mixer 4-in-2 mix module in Eurorack format, Four inputs with attenuator and pan control, plus two 3.5 mm mini jack outputs, Width: 8 HP, Depth: 30 mm, Power requirements: +10 mA (+12 V)...

Doepfer A-160-2 Clock Divider II
(12)
Doepfer A-160-2 Clock Divider II

Frequency divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

Doepfer A-180-2 Multiples
(60)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

Doepfer A-100 LC1 Low Cost Case
(5)
Doepfer A-100 LC1 Low Cost Case
Till produkter
119 €

Case for Eurorack Modules Integrated power supply A-100SSB: +12 V / 380 mA, -12 V / 380 mA, To 48 TE shortened A-100LC3 version, Built-in bus board with 8 module slots, Casing made of raw wood -...

Doepfer A-180-3 Dual Buffered Multiple
(11)
Doepfer A-180-3 Dual Buffered Multiple

Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm

Doepfer A-132-3
(23)
Doepfer A-132-3

VCA Switchable characteristic between linear and exponential, Audio and CV signals can thus be optimally processed, Width: 8 HP, Depth: 50 mm, Power requirements: +30 mA (+12 V)/-30 mA (-12 V)

Doepfer A-119
(37)
Doepfer A-119

External Input / Envelope FollowerModule A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The...

Doepfer A-140
(55)
Doepfer A-140

ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...

Doepfer A-138b
(52)
Doepfer A-138b

Mixer with Logarithmic Potentiometers Primarily suitable for audio signals, Width: 8 HP, Depth: 35 mm, Power requirements: +10 mA (+12 V) / -10 mA (-12 V)

64 € 660,80 SEK
Inklusive moms, 10 € frakt tillkommer
Gratis frakt från 199 €

Priset i SEK är ungefärligt

Tillgänglig
Tillgänglig

Denna artikel finns i lager och kan skickas ut omgående.

Information om leveransen
Dela denna produkt
Din kontaktperson
Tel +49-9546-9223-30
Fax +49-9546-922328
Online-guide
Equalisers
Equalisers
EQ is perhaps the least noticed of all types of audio processing, but also the most important.
Online guider
Equalisers
Equalisers
EQ is perhaps the least noticed of all types of audio processing, but also the most important.
 
 
 
 
 
testresultat
Erbjudanden inkluderar 25 % svensk moms och gäller så länge lagret räcker. Fraktkostnad till Sverige är 15 euro. Gratis frakt på beställningar med ett varuvärde över 199 euro. Var god klicka här för internationella fraktkostnader och leveranstider. För tryckfel och misstag lämnas inget ansvar. *UVP = Tillverkarens rekommenderade pris i Tyskland.
Harley Benton Fusion-HSH Roasted Maple Slate Digital ML-2 DPA 4066-OC-A-F10-LH Slate Digital ML-1 JHS Pedals The Bonsai Hercules Stands HCGS-414B+ Guitar Stand Zynaptiq Intensity Sennheiser ew IEM G4 A-Band Sound Devices MixPre-6M Tech 21 DP-3X Harley Benton Fusion-HSH MN Aqua K&M 17650 Guitar Stand
Rekommenderat
Harley Benton Fusion-HSH Roasted Maple

Electric Guitar Ergonomically shaped mahogany body, "Ultra Flame" flamed maple veneer top, Matching headstock, Bolt-on neck from "roasted" Canadian flamed maple, "Roasted" maple fretboard, Neck shape: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone...

Till produkter
406 €
(2)
Rekommenderat
Slate Digital ML-2

Small Diaphragm Condenser Microphone For Slate Digital VRS8 Thunderbolt audio interface, similar linear and flat frequency response to the Slate Digital ML-1, Allows microphone placement that is difficult or impossible for a larger microphone, Side mounted pad switch -...

Till produkter
159 €
Rekommenderat
DPA 4066-OC-A-F10-LH

DPA 4066-OC-A-F10-LH, d:fine CORE 4066 Omni Headset Mic, professional headset microphone with removable and adjustable neck holder for left or right-sided use. Omnidirectional, 20Hz-20kHz with 3dB boost between 8-20kHz, 144dB SPL max.,TA-4F Switchcraft connector for Shure Transmitter . beige, Great...

Till produkter
725 €
Rekommenderat
Slate Digital ML-1

Large-diaphragm condenser microphone Neutral ML-1 condenser microphone that can be combined with VMS hardware and software, Optional Neutral VMS preamp ensures minimal sound-colouration (not included!), Via VMS plug-in software, you can completely change the sound characteristics even after recording,...

Till produkter
855 €
(1)
Rekommenderat
JHS Pedals The Bonsai

Effect Pedal Overdrive, 9 Tube Screamer Overdrive modes, 5 Classic TS circuits and 2 popular mods, Analogue operation, True bypass, Volume, sustain and tone controls, 9-Way rotary control to select between Tube Screamer modes (OD-1 / TS-808 / TS-9...

Till produkter
259 €
Rekommenderat
Hercules Stands HCGS-414B+ Guitar Stand

Hercules Stands HCGS-414B +, AGS PLUS Guitar Floor Stand for All Electric Guitars / Electric Basses / Acoustic Guitars/Mandolinen/Banjos and Ukulelne, Auto Grab Holder automatically secures the instrument from falling out, (for standard widths of 40-52 mm) with improved foam...

Till produkter
44 €
Rekommenderat
Zynaptiq Intensity

Zynaptiq Intensity (ESD); enhancer plugin; innovative algorithm increases detail, clarity, density and loudness of any audio signal; suitable for single tracks, groups, mixbus or mastering; easy to us clearly arranged user interface; additional soft-knee saturating limiter at the output stage;...

Till produkter
150 €
Rekommenderat
Sennheiser ew IEM G4 A-Band

Evolution Wireless In Ear System Consists of UHF bodypack receiver (EK IEM G4), 9.5" transmitter (SR IEM G4) and IE4 earphones, Stereo / focus / mono modes, Up to 1680 frequencies in 42 MHz switching bandwidth, 20 Channel banks...

Till produkter
990 €
Rekommenderat
Sound Devices MixPre-6M

Portable multitrack audio recorder and USB audio interface Max. of 12 tracks, 6 of them simultaneous, Kashmir microphone preamplifier with 76 db gain, Inherent noise:-128 dBu max. (A-weighted, gain = 76 dB, 150 ohm source impedance), Limiter per channel,...

Till produkter
955 €
Rekommenderat
Tech 21 DP-3X

Preamp for bass dUg Pinnick signature model, Controls: volume, chunk, high, mid, low, comp, drive, Gain switch, Mix button, Chromatic tuner, XLR DI output, TRS input / output, Headphone output, Dimensions (W x D x H): 19.7 x 6.4...

Till produkter
299 €
Rekommenderat
Harley Benton Fusion-HSH MN Aqua

Electric Guitar Ergonomically shaped mahogany body, "Ultra Quilted" plywood veneer top, Matching headstock, Bolt-on Canadian Hard Maple neck, Maple fretboard, Neck profile: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone nut, Nut width: 42...

Till produkter
304 €
(2)
Rekommenderat
K&M 17650 Guitar Stand

Guitar Stand - Carlos Tall A-frame design, Can be folded flat, Support arms include protective felt pads, Suitable for guitars with nitrocellulose lacquer finishes, Neck lock (Security Lock), Colour: Black, Support depth: 125 mm, Dimensions: 410 x 515 mm,...

Till produkter
69 €
Feedback Har du hittat ett fel eller vill ge oss feedback om denna sida?

Vi ser fram emot att höra från dig och kommer att lösa eventuella problem så snart vi kan.

Lämna kommentar. Ange din e-postadress.