Doepfer A-120 Vintage Edition

10

24 dB Low Pass 1 (VCF1)

Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off frequency (corner frequency) determines the point at which this effect occurs. They can be set or modulated both manually and via control voltages (filter modulation, with an LFO for example).

The VCF1 is configured as a "transistor cascade" with an edge slope of -24 dB / octave, which is also used in various Moog synthesisers, This results in the typical, "legendary" Moog sound. The resonance (emphasis) can be adjusted at the VCF 1 up to self-oscillation. In this case, the filter operates as a sinusoidal oscillator.

  • Vintage edition with black front panel
  • Voltage-controlled 24 dB low-pass filter
  • Black front panel
  • Width: 8TE / 40.3 mm
  • Depth: 65 mm (measured from the back of the front panel)
  • Power requirements: 30mA (12V) / -20mA (-12V)
Tillgänglig sedan Mars 2016
Artikelnummer 383620
försäljningsenhet 1 Styck
Width 8 TE / HP
1 499 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Onsdag, 24.04. och Torsdag, 25.04.
1

10 Kundbetyg

4.8 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

drift

funktioner

ljud

hantverkskvalitet

8 Recensioner

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
EL
Moog ladder in Eurorack
Earl Langoustine 28.01.2021
This module gives you the classic Moog filter sound in Doepfer's 8hp format. If you've used one of the other Doepfer filter clones, you'll already have an idea of what this module is like. Of the three CV inputs, one tracks volt-per-octave and the other two come with attenuation. Resonance sounds very smooth and not piercing, as you would expect from this filter design, and also has input gain which seems to drive it. Pairs nicely within a larger Moog-style system - such as preceding this module with a CP3 mixer clone.

Important to note that these Doepfer filters are quite deep and will not fit in all skiffs (such as the Intellijel palette case). But on the positive, the currently listed specs above are wrong and the module is only around 55 mm deep (not the 65 mm listed above, the correct measurement is on Modulargrid).
drift
funktioner
ljud
hantverkskvalitet
3
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
H
Get it
Hermanator 13.07.2021
I bought most of the Doepfer filter modules, and this is by-far my favorite. I didn't think that I'd like the bass response dropping off as resonance was increased, but I LOVE IT. I feel like this actually defines this filter. The adjustable sonic range on this is huge, when controlling level & resonance. I liked moog filters on softsynths & digital synths, but I LOVE this filter & authentic moog filters. There's a night & day difference between this & a digital emulation. It must be the way all of the transistors interact with one another as the resonance, level, and frequency is changed. Many digital emulations don't account for all of these minute differences. This thing really delivers. My only complaint, if any, are the knobs are a bit rough (hard on the hands to twist a lot). I'm tempted to replace them with a more comfortable knob, but I'd lose the classic look.
drift
funktioner
ljud
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension