Decotruss 3 Point Truss Silver 45cm

Truss

The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is suitable to create individual design-elements, such as shopfitting and trade show booths. Decotruss constructions can be used as design elements and for low weight installations. Please note the applicable trussing construction guidelines.

  • The decorative trussing
  • Easy installation
  • Max. distributed section load: 35 kg
  • Longitudinal tubes: 15 x 1 mm
  • Crossbars: 5 mm
  • Dimensions: 450 x 150 x 130 mm

Vidare information

Feature Straight
Lenght or diameter 45 cm
Tailings 2
Colour Silver
System Decotruss

Detta är andra kunders val:

Kunder som tittat på denna produkt, har köpt dessa:

Decotruss 3 Point Truss Silver 45cm
26% köpte exakt denna produkt
Decotruss 3 Point Truss Silver 45cm
Tillgänglig
Tillgänglig

Denna artikel finns i lager och kan skickas ut omgående.

Information om leveransen
14,90 € Lägg i varukorgen
Decotruss 3 Point Truss Silver 50cm
13% köpte Decotruss 3 Point Truss Silver 50cm 18,60 €
Decotruss 3 Point Truss Silver 25cm
11% köpte Decotruss 3 Point Truss Silver 25cm 11,50 €
Decotruss 3 Point Truss Silver 2m
11% köpte Decotruss 3 Point Truss Silver 2m 53 €
Decotruss 3 Point Truss Silver 1m
8% köpte Decotruss 3 Point Truss Silver 1m 29 €
Vår mest populära Deco tross
15 Kundbetyg
  • 5
  • 4
  • 3
  • 2
  • 1
4.4 / 5.0
  • hantverkskvalitet
Visa variationer för denna produkt
Decotruss 3 Point Truss Silver 45cm
(15)
Decotruss 3 Point Truss Silver 45cm
Till produkter
14,90 €

Truss The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

Decotruss 3 Point Truss Silver 2m
(80)
Decotruss 3 Point Truss Silver 2m

Truss The Decotruss elements can be screwed together with the connecting plates with three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

Decotruss 3 Point Truss 1,5m
(67)
Decotruss 3 Point Truss 1,5m

Deco Truss Through a variety of trusses and corners you can create fantastic structures. Decotruss is suitable to create individual design-elements, such as shopfitting and trade show booths....

Decotruss 3 Point Truss Silver 1m
(87)
Decotruss 3 Point Truss Silver 1m

Truss The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

Decotruss 3 Point Truss Silver 50cm
(46)
Decotruss 3 Point Truss Silver 50cm
Till produkter
18,60 €

Truss The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

Decotruss 3 Point Truss Silver 25cm
(24)
Decotruss 3 Point Truss Silver 25cm
Till produkter
11,50 €

Truss The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

Decotruss 3 Point Truss Silver 47cm
(4)
Decotruss 3 Point Truss Silver 47cm
Till produkter
18,90 €

Deco Truss Through a variety of trusses and corners you can create fantastic structures. Decotruss is suitable to create individual design elements, such as shopfitting and trade show booths....

14,90 € 153,84 SEK
Inklusive moms, 10 € frakt tillkommer
Gratis frakt från 199 €

Priset i SEK är ungefärligt

Tillgänglig
Tillgänglig

Denna artikel finns i lager och kan skickas ut omgående.

Information om leveransen
Dela denna produkt
Din kontaktperson
Tel +49-9546-9223-45
Fax +49-9546-9223-443
gratis nedladdning
ladda ned
 
 
 
 
 
testresultat
Erbjudanden inkluderar 25 % svensk moms och gäller så länge lagret räcker. Fraktkostnad till Sverige är 15 euro. Gratis frakt på beställningar med ett varuvärde över 199 euro. Var god klicka här för internationella fraktkostnader och leveranstider. För tryckfel och misstag lämnas inget ansvar. *UVP = Tillverkarens rekommenderade pris i Tyskland.
Harley Benton Fusion-HSH Roasted Maple Slate Digital ML-2 DPA 4066-OC-A-F10-LH Slate Digital ML-1 JHS Pedals The Bonsai Hercules Stands HCGS-414B+ Guitar Stand Zynaptiq Intensity Sennheiser ew IEM G4 A-Band Sound Devices MixPre-6M Tech 21 DP-3X Harley Benton Fusion-HSH MN Aqua K&M 17650 Guitar Stand
Rekommenderat
Harley Benton Fusion-HSH Roasted Maple

Electric Guitar Ergonomically shaped mahogany body, "Ultra Flame" flamed maple veneer top, Matching headstock, Bolt-on neck from "roasted" Canadian flamed maple, "Roasted" maple fretboard, Neck shape: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone...

Till produkter
406 €
(2)
Rekommenderat
Slate Digital ML-2

Small Diaphragm Condenser Microphone For Slate Digital VRS8 Thunderbolt audio interface, similar linear and flat frequency response to the Slate Digital ML-1, Allows microphone placement that is difficult or impossible for a larger microphone, Side mounted pad switch -...

Till produkter
159 €
Rekommenderat
DPA 4066-OC-A-F10-LH

DPA 4066-OC-A-F10-LH, d:fine CORE 4066 Omni Headset Mic, professional headset microphone with removable and adjustable neck holder for left or right-sided use. Omnidirectional, 20Hz-20kHz with 3dB boost between 8-20kHz, 144dB SPL max.,TA-4F Switchcraft connector for Shure Transmitter . beige, Great...

Till produkter
725 €
Rekommenderat
Slate Digital ML-1

Large-diaphragm condenser microphone Neutral ML-1 condenser microphone that can be combined with VMS hardware and software, Optional Neutral VMS preamp ensures minimal sound-colouration (not included!), Via VMS plug-in software, you can completely change the sound characteristics even after recording,...

Till produkter
855 €
(1)
Rekommenderat
JHS Pedals The Bonsai

Effect Pedal Overdrive, 9 Tube Screamer Overdrive modes, 5 Classic TS circuits and 2 popular mods, Analogue operation, True bypass, Volume, sustain and tone controls, 9-Way rotary control to select between Tube Screamer modes (OD-1 / TS-808 / TS-9...

Till produkter
259 €
Rekommenderat
Hercules Stands HCGS-414B+ Guitar Stand

Hercules Stands HCGS-414B +, AGS PLUS Guitar Floor Stand for All Electric Guitars / Electric Basses / Acoustic Guitars/Mandolinen/Banjos and Ukulelne, Auto Grab Holder automatically secures the instrument from falling out, (for standard widths of 40-52 mm) with improved foam...

Till produkter
44 €
Rekommenderat
Zynaptiq Intensity

Zynaptiq Intensity (ESD); enhancer plugin; innovative algorithm increases detail, clarity, density and loudness of any audio signal; suitable for single tracks, groups, mixbus or mastering; easy to us clearly arranged user interface; additional soft-knee saturating limiter at the output stage;...

Till produkter
150 €
Rekommenderat
Sennheiser ew IEM G4 A-Band

Evolution Wireless In Ear System Consists of UHF bodypack receiver (EK IEM G4), 9.5" transmitter (SR IEM G4) and IE4 earphones, Stereo / focus / mono modes, Up to 1680 frequencies in 42 MHz switching bandwidth, 20 Channel banks...

Till produkter
990 €
Rekommenderat
Sound Devices MixPre-6M

Portable multitrack audio recorder and USB audio interface Max. of 12 tracks, 6 of them simultaneous, Kashmir microphone preamplifier with 76 db gain, Inherent noise:-128 dBu max. (A-weighted, gain = 76 dB, 150 ohm source impedance), Limiter per channel,...

Till produkter
955 €
Rekommenderat
Tech 21 DP-3X

Preamp for bass dUg Pinnick signature model, Controls: volume, chunk, high, mid, low, comp, drive, Gain switch, Mix button, Chromatic tuner, XLR DI output, TRS input / output, Headphone output, Dimensions (W x D x H): 19.7 x 6.4...

Till produkter
299 €
Rekommenderat
Harley Benton Fusion-HSH MN Aqua

Electric Guitar Ergonomically shaped mahogany body, "Ultra Quilted" plywood veneer top, Matching headstock, Bolt-on Canadian Hard Maple neck, Maple fretboard, Neck profile: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone nut, Nut width: 42...

Till produkter
304 €
(2)
Rekommenderat
K&M 17650 Guitar Stand

Guitar Stand - Carlos Tall A-frame design, Can be folded flat, Support arms include protective felt pads, Suitable for guitars with nitrocellulose lacquer finishes, Neck lock (Security Lock), Colour: Black, Support depth: 125 mm, Dimensions: 410 x 515 mm,...

Till produkter
69 €
Feedback Har du hittat ett fel eller vill ge oss feedback om denna sida?

Vi ser fram emot att höra från dig och kommer att lösa eventuella problem så snart vi kan.

Lämna kommentar. Ange din e-postadress.