48 träffar. Visar produkter 26–48.
Priset är inklusive moms Gratis frakt från 199 €
Inga resultat funna :-(
Etta av dina filter filtrerar så bra att inga produkter hittades!
Etta av dina filter filtrerar så bra att inga produkter hittades!
Du kan ta bort dina filter och börja om. eller använd tidigare filter du valt.
Microphone split box 2-Channel splitter box 1" in 3", Aluminium diecast housing, Per channel: One XLR input (female) parallel jack, XLR (male), two XLR outputs (male) via an isolating transformer 1: 1, Nominal level: 0 dB, Maximum level: +20...
- 2-Channel splitter box 1" in 3"
- Aluminium diecast housing
- Per channel: One XLR input (female) parallel jack, XLR (male), two XLR outputs (male) via an isolating transformer 1: 1
Passive line splitter with adjustable trim
Passive line splitter with adjustable trim XLR / jack combi input, 2 XLR outputs, Switchable gnd / lift per output, Jensen transformer, Frequency range: 20 - 20,000 Hz, Dynamic range:140 dB, Robust metal housing, Dimensions: 84 x 127 x...
- XLR / jack combi input
- 2 XLR outputs
- Switchable gnd / lift per output
1 in 2 microphone splitter Jensen transmitter for high sound quality, Connections: XLR in / thru / out, Switchable 30 dB pad, Switchable Gnd / Lift, Robust metal housing, Installation of up to 8 units is possible with the...
- Jensen transmitter for high sound quality
- Connections: XLR in / thru / out
- Switchable 30 dB pad
Passive microphone splitter 1 Input, 3 outputs, Input: XLR female, Thru: XLR male, Switchable 30 dB pad, 2 XLR male outputs with switchable Ground Lift on each, Stable metal housing
- 1 Input, 3 outputs
- Input: XLR female
- Thru: XLR male
Mic / Line Splitter 4 In / 16 Out, 4 Studio Grade Mic / Line Preamps, 48V switchable, Headphone output per input switchable, For each channel 4 outputs (also 1 In / 16 Out or 1 In / 12...
- 4 In / 16 Out
- 4 Studio Grade Mic / Line Preamps
- 48V switchable
Format converterThe MUTEC MC-1.1 + is a signal converter that easily converts between the usual AES3 and S / P-DIF digital audio formats. AES / EBU, AES / EBUid, and S / P DIF (optical / coaxial)...
- AES / EBU, AES / EBUid, and S / P DIF (optical / coaxial) interfaces in one device
- Uni- and bi-directional format conversions up to 192.0 kHz
- Signal improvement by low-jitter PLLs
Passive microphone splitter 4 Channels, Nominal impedance of the inputs / outputs: 200 Ohm, Max. input: +6 dB, Format: 19" / 1U, On the front of each channel: One input, one parallel jack (output for looping phantom power), and...
- 4 Channels
- Nominal impedance of the inputs / outputs: 200 Ohm
- Max. input: +6 dB
Radial Engineering Relay Xo, balanced signal switcher, to switch vocal microphone from PA to intercom for technicans or musicians, also to use two inputs on the mixing desk for different mixes, XLR microphone input, XLR/Klinke Combi JR1 Remote input, XLR...
Line Summing / Merger 2 Channel active summed e.g. 2 mixing consoles to 1 PA system, Adjustable output volume, Switchable pad, Mute and mono per channel, XLR / Combi input, XLR Input, XLR Output, Internal power supply, Format: 9.5"/...
- 2 Channel active summed e.g. 2 mixing consoles to 1 PA system
- Adjustable output volume
- Switchable pad
Signal merge box 2-Channel signal merge box for microphones, Switchable phantom power passage, Phase rotatable, From 2x XLR female in to 1x XLR male out, Balanced decoupling, Also suitable for condenser microphones
- 2-Channel signal merge box for microphones
- Switchable phantom power passage
- Phase rotatable
Splitter 1 balanced XLR input, 2 isolated balanced XLR outputs, 1 balanced XLR link output
- 1 balanced XLR input
- 2 isolated balanced XLR outputs
- 1 balanced XLR link output
Press Box Audio distribution, Is used for press conferences to distribute 1 red microphone to 20 send stations or recording devices galvanically separated, 2 x Inputs: XLR / f (one balanced input for microphone and line level, optionally switchable),...
- Audio distribution
- Is used for press conferences to distribute 1 red microphone to 20 send stations or recording devices galvanically separated
- 2 x Inputs: XLR / f (one balanced input for microphone and line level, optionally switchable)
Active guitar splitter For operation with several amps, Unbalanced jack input, Jack link out, Isolated jack out with switchable phase, Jack LoZ out, Adjustable gain, Operation with 1x 9V battery, Connection for optional power supply 9-15 V DC
- For operation with several amps
- Unbalanced jack input
- Jack link out
S / PDIF Audio Splitter Distributes optical S / PDIF signals from one source and passes them to two devices in parallel, Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) and compressed multi-channel Dolby and DTS audio signals, Supports...
- Distributes optical S / PDIF signals from one source and passes them to two devices in parallel
- Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) and compressed multi-channel Dolby and DTS audio signals
- Supports cable lengths up to 5m per in and out
4 Channel Guitar Distributor
4 Channel Guitar Distributor 4x Jack inputs at the back, 2x Jack inputs on the front with priority, 6x Amplifier Out, Channel 3/4 Dual Parallel, Footswitch Remote Control, Footswitch out Mute and Tuner, Integrated DI Box, SGI interface for...
- 4x Jack inputs at the back
- 2x Jack inputs on the front with priority
- 6x Amplifier Out
Guitar switching system
Guitar switching system For up to 6 guitars and 2 amplifiers, 6.3 mm jack input/thru per channel, DI output for channels 5 and 6, Loop jack send/receive, Outputs: A/B XLR and 2x jack, Switchable Gnd/lift and 180° phase per...
- For up to 6 guitars and 2 amplifiers
- 6.3 mm jack input/thru per channel
- DI output for channels 5 and 6
Y-Box Guitar SplitterPALMER Y-Box, splitbox for guitar signals. "When I am connecting the inputs of my two amplifiers, there is a strong hum." A frequent query in the technical section of relevant specialist magazines. The solution to this problem is...
- Clinking input with 1 Mohm input impedance
- Output AMP1 as parallel circuit
- Output AMP2 is electronically converted with a subsequent transformer stage
Radial Engineering PS4 Cherry Picker, passive 3-channel Preamp Selector, 1x XLR in, 4x XLR out, switchable 48V Phantom, switchable Grnd-Lift, especially to select different preamps for one Studio Mic, external powersupply
Sound Tools Mic Switcher 3-to-1 microphone-switch, connectors for up to 3 microphones that can be switched to one output, 1,5 m cable with 3 x XLR-f and 1 x XLR-m, noiseless switch
Radial Engineering 8 OX, 8-channel Mic/Line Splitter 19",1 unit, XLR inputs, D-Sub outs and phönix installation clamps, Eclipse Transformer
Summing Amplifier 2 x 2 Identical sections with two balanced inputs and one balanced output each (4 x 2 in 1), Front side is switchable from 2 x 2 in 1 to 4 in 1 (output signal can then...
- 2 x 2 Identical sections with two balanced inputs and one balanced output each (4 x 2 in 1)
- Front side is switchable from 2 x 2 in 1 to 4 in 1 (output signal can then be split to both outputs)
- Rear side inputs balanced symmetrically via XLR
Passive Microphone Splitter Box
Passive Microphone Splitter Box 1 x XLR to 3 x XLR (1 x Direct, 2 x Isolated)
- 1 x XLR to 3 x XLR (1 x Direct, 2 x Isolated)
Lake People splitting amplifier F844, 4 x 1 in 2 / 2 x 1 in 4, 2 x 2 identical sections with one balanced inputs and two balanced outputs each (4 x 1 in 2), front operated switch for 2...
Erbjudanden inkluderar 25 % svensk moms och gäller så länge lagret räcker. Fraktkostnad till Sverige är 15 euro. Gratis frakt på beställningar med ett varuvärde över 199 euro. Var god klicka här för internationella fraktkostnader och leveranstider. För tryckfel och misstag lämnas inget ansvar. *UVP = Tillverkarens rekommenderade pris i Tyskland.