ART Splitcom Pro - split or combine low impedance balanced microphone signals. Low distortion with wide frequency response, two functions in one box, combines and/or splits, phase invert switch for subtractive combining, galvanic isolation to block phantom power between channel, ground lift switch to reduce ground loop noise, XLR inputs and outputs.
I Run 2 BOSE L1s with B2 subs.. and use a Mackie DL806 desk.. I needed only to have one BOSE system in a venue for an event, but needed more inputs than the BOSE Tonematch had. I used a lead from 2 - XLR outs (desk) to a Stereo jack in for the BOSE PA. I got such a strange sound, like a crazy reverb and low volume levels, but had no reverb on the desk. I ended up using just the left channel, wasn't happy with the sound that night.. something was missing.
I looked into why and found that, the lead doesn't 'SUM' the outputs to create a clean balanced signal.
Hence why I've bought the ART Splitcom Pro. I now should be able to have a stereo signal 'SUMMED' into one lead.
I can guarantee someone else has had this problem. Hope this review will help you.
I bought the splitter so we could add one more microphone to our mixing desk. It worked very well for this purpose with out, as far as I can tell, colouring the sound at all. It also works well for sending a signal to two separate outputs. We've used it send the same signal to both the PA and recording equipment.
Build quality is great. It's been travelling around lose in the bottom of my equipment bag for months now and other than a few knocks and scrapes is still in good condition and working perfectly. It's proven to be a good, cheap solution for an annoying problem.
Erbjudanden inkluderar 25 % svensk moms och gäller så länge lagret räcker. Fraktkostnad till Sverige är 15 euro. Gratis frakt på beställningar med ett varuvärde över 199 euro. Var god klicka här för internationella fraktkostnader. För tryckfel och misstag lämnas inget ansvar. *UVP = Tillverkarens rekommenderade pris i Tyskland.