ABM 6210 Webster Nut SC Style

144

Starta 360°

Visa översättning

Nut for Single Cut Guitars

Adjustable brass nut
Width: 42.80 mm
Depth: 4.90 mm
String spacing: 7.00 mm
Made in Germany

30 30 dagar öppet köp

Tillgänglig sedan Juli 2010

Artikelnummer 250642

försäljningsenhet 1 Styck

Width in mm 43 mm

Unmachined No

Instrument LP-Style

295 kr

inklusive moms, 99 kr frakt tillkommer

Beräknat utskeppningsdatum till Torsdag, 25.04.

Säljranking

i Sadel

Detta är vad kunder som tittade på denna produkt köpte

Framus Webster Guitar Nut Brass

222 kr

köpt

Graph Tech Black TUSQ XL PT-6643-00

175 kr

köpt

Graph Tech Nut for St-Style

163 kr

köpt

Graph Tech Black TUSQ XL PT-5042-00

176 kr

144 Kundbetyg

5 94 Kunder 4 24 Kunder 3 13 Kunder 2 8 Kunder 1 5 Kunder

4.3 / 5

hantverkskvalitet

Poängpolicy

86 Recensioner

Great product!

Kalasfredde 07.04.2021

I put this on one of my acoustic projects, it works great even for guitars that dont have a slotted nut fitting!

It may require some customization of the guitar so beware if you are not comfortable with this, depending on how far you need to lower the screws for each individual string it may interfere with the neckjoint.

I simply drilled tiny holes for the screws to be able to submerge further.

I was a bit worried that the strings would slip or even "turn" the screws since i fitted this onto a 3+3 without string guiders, but i had no such problem!

This product is great if you find yourself trying different string gauges or simply trying to set up a guitar and dont like filing nut slots!

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Bo L. 23.10.2019

Mkt bra, fick bearbeta justeringskruvarna (korta dem), men sedan blev det bra.

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

For me it works great

PaulPp 06.04.2021

I have it in my (Korean) epiphone the dot guitar with .10 gauge stings. It's a very high quality product, very well made. It's depth do not exactly fits my guitar neck, I think the neck is 43mm. But that's not a real problem.
It enhances sustain noticeably and it's easy to set it. It will take you some time to set the individual height properly but when you're done with that your setup will be great. I did use a caliper to set it with precision and the result is amazing. Do not set all the strings at the same height. If you want to take the full advantage of the product be thorough and precise. String gauge, neck radius and relief are very important. First set the relief, then the nut height, and then the action for better results. Captain obvious here!
It does change the quality of the sound not only sustain wise (a Lot!) but also tone wise (a little). It can slightly open the high frequencies, not in a bad way. You will hardly notice the tone difference when you play through an amp.
I will definitely buy another one

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

Great quality but needs adjustments.

Göran L. 16.05.2014

I thought that this was replacement for a standard nut. The qaulity and the craftmanship is flawless and the sound from the brass nut is pretty cool. It ads sustain and the instrument gets a more bell-like tone.

I bought this for a restoration of a old Hamer Special and needed a new nut because the old one was long gone. Since I don't have the proper tools or skill to make a nut from scratch I choose to try this one out because you can easily change the height of each string with a small screwdriver.

I works ok for trying the guitar out and for light playing but if you play to hard the string will drop out of the very shallow slot and get out of position and out of tune.

To avoid this you have to file the slots deeper and for that you need the proper tools.

It´s a great thing to play around with but you'll probably do better with a standard nut from bone or solid brass.

If you have an instrument with no angle over the nut it will probably work just fine.

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Läs alla recensioner

ABM 6210 Webster Nut SC Style

Nut for Single Cut Guitars

Detta är vad kunder som tittade på denna produkt köpte

144 Kundbetyg

Du måste vara inloggad för att kunna betygsätta en produkt.

86 Recensioner

Smart Navigator

Nyligen visade produkter

Handla och betala säkert

Dina fördelar

Service

Serveras med kärlek!

ABM 6210 Webster Nut SC Style

Nut for Single Cut Guitars

Detta är vad kunder som tittade på denna produkt köpte

Tillbehör & matchande produkter

144 Kundbetyg

Du måste vara inloggad för att kunna betygsätta en produkt.

86 Recensioner

Jämför alternativ

Smart Navigator