Thon Mixer Case Yamaha MG16/20 XU

Arată traducerea

Mixer case

  • Made-to-measure flight case for Yamaha MG16 and MG20 XU
  • Made from 7 mm birch plywood
  • 22 x 22 mm aluminium edges
  • Foam padding
  • 2 Drawbolts
  • 2 Hinged locks
  • 1 Suitcase handle
  • Steel ball corners
  • 9 cm place for cable in the back
  • External dimensions (W x D x H): approx. 510 x 645 x 195 mm
  • Weight: approx. 6.7 kg
  • Manufactured in Germany

Informatii aditionale

made for Yamaha
Type Case
Material 7mm PVC coated plywood
Wheels No
Dockhouse No

Iată alte alegeri de-ale clienților:

Clienții care au vizualizat acest articol au cumpărat următoarele:

Thon Mixer Case Yamaha MG16/20 XU
68% au achiziţionat acest produs
Thon Mixer Case Yamaha MG16/20 XU
Disponibil imediat
Disponibil imediat

Acest articol este disponibil în stoc și se poate expedia imediat.

Informații despre livrare
138 € Adaugă în coş
Thomann Mix Case 5462C
4% au achiziţionat Thomann Mix Case 5462C 67 €
Thon Mixer Case Yamaha MG12 XU
3% au achiziţionat Thon Mixer Case Yamaha MG12 XU 118 €
Thomann Bag for X Air XR18
2% au achiziţionat Thomann Bag for X Air XR18 19,70 €
Flyht Pro Case Behringer X Air XR18
2% au achiziţionat Flyht Pro Case Behringer X Air XR18 68 €
Cele mai populare Cutii pentru Mixere
107 Evaluările clienţilor
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • Stabilitate
  • Manipulare
  • Măiestrie
gb Recenzie originală (Arată traducerea)
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Total
Stabilitate
Manipulare
Măiestrie
Very well made quality case.
Christo C, 10.11.2014
This case, made specifically for the Yamaha MG 16 or 20, is an incredibly durable case. Between the reinforced corners, the studio foam and the 7mm plywood this case is NOT going to break!

We've used this case for gigging extensively over the past few weeks (two to five times a week) and there are only a handful of minor problems I have encountered with it.
1. There seems to occasionally be a build up of condensation inside the case after transport in a van. This has not been a problem so far but I hope that as we come into colder weather it does not effect the electrics...
2. As the only way to properly access the mixer while in the case is to remove the hinged lid you can find yourself in a predicament. In small stage spaces (living in Ireland!) the swing required to remove the lid is just not there! It can be quite cumbersome to set up sometimes.

Bottom line is it is a fantastically well built and durable case tailor made for the Yamaha MG mixers. Anything else just won't cut it.
De ajutor · De nici un ajutor · semnaleaza un abuz
Raportează evaluarea…

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive?

Trimitere raport
gb Recenzie originală (Arată traducerea)
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Total
Stabilitate
Manipulare
Măiestrie
Solid Build with excellent protection
JayD1977, 18.01.2020
Very solid construction and having seen it dropped recently from a few feet, offers excellent protection. Its also surprisingly light.
The case comes with the foam cut to size, and also a section large enough to store my sssnake MTS 164 - 30 System.
Added bonus of it being possible to operate the desk in the bottom half of the case.
De ajutor · De nici un ajutor · semnaleaza un abuz
Raportează evaluarea…

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive?

Trimitere raport
gb Recenzie originală (Arată traducerea)
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Total
Stabilitate
Manipulare
Măiestrie
Stable, quality, one to trust.
04.12.2016
Not only is this case highly sturdy and of the highest quality but it is most certainly trustworthy when it comes to protecting what is the heart of your PA system. The 7mm ply and protective foam forms a highly protective atmosphere to keep your desk in. We've had this case and associated desk for a number of months now and even though its been through a number of scrapes it has protected the desk 100%. I think this case is going to keep the desk clean , safe and functional for many a year to come!

Negatives?
The rear hinge system means that you cannot simply lift the lid off entirely unless you hinge the lid all the way back, in which case the lid comes off. If there were catches on both sides that would be an improvement.

The catches ore of the toggle case latch type. Whilst sturdy, butterfly catches would provide more security to this case as it would prevent accidental catching and opening of the latch, as has happened with me on one occasion.


In summary the case is of very good build quality and shows good value for money. It will protect your case to the highest degree. Be aware of the rear hinge and catches but don't let that put you off a fantastic case!
De ajutor · De nici un ajutor · semnaleaza un abuz
Raportează evaluarea…

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive?

Trimitere raport
gb Recenzie originală (Arată traducerea)
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Total
Stabilitate
Manipulare
Măiestrie
Solid and durable
02.01.2016
I bought this case for the MG16XU... The mixer fits snugly into the foam interior, there is no "wiggle room" that would cause it to bounce around inside when transporting.

Another reviewer mentions a build up of condensation inside the case but I haven't found this at all (I even checked specifically for this issue after storing in a cold van overnight... I found no condensation at all).

The build is solid and provides peace of mind in the knowledge that the mixer is safe when being transported between gigs.

My one gripe is the price, I can't understand why this case costs more than double the price of the Thon utility case... the dimensions are different but the materials and internal volume are very similar (except with added foam interior). That said, I'd rather pay the price than have the potential of damaging the the mixer.

Overall - I'd recommend it.
De ajutor · De nici un ajutor · semnaleaza un abuz
Raportează evaluarea…

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive?

Trimitere raport
138 € 679,75 lei
Include TVA plus 20 € transport

Prețul în RON este doar de ghidaj!

Disponibil imediat
Disponibil imediat

Acest articol este disponibil în stoc și se poate expedia imediat.

Informații despre livrare

Livrare aprox. între Marţi, 27.04. și Miercuri, 28.04.

Share produs
Persoane de Contact
telefon: +49-9546-9223-35
FAX: +49-9546-9223-24
Ghiduri online
Racks & Cases
Racks & Cases
If you take good care of your equipment, your pack it up carefully - and this means getting a proper case!
 
 
 
 
 
rezultatele testelor:
* Preturile includ TVA si sunt valabile in limita stocului disponibil. Va rugam click aici pentru tarife livrari internationale. Nu ne asumam raspunderea pentru greselile de tipar sau informatiile eronate. Toate facturile vor fi emise in EUR.
11
(11)
Recent vizionate Note
Audient iD4 MKII

USB-C Audio Interface 24 bit / 44.1 - 96 kHz, ADC dynamic range: 121 dB, DAC dynamic range: 126 dB, @Class A Audient console microphone preamplifier, Mic Gain 58 dB,

Recent vizionate Note
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

Recent vizionate Note
Focal Alpha 50 Evo

Focal Alpha 50 Evo; active studio monitor; tweeter: 1" inverted aluminium dome tweeter 20W (Class D); woofer: 5" carbon fibre cone 30W (Class D); frequency range: 45 - 22000Hz (+/- 3dB); max. SPL: 101dB (peak @ 1m); Inputs: 1x Jack…

Recent vizionate Note
Alesis Nitro Expansion Pack

Expansion set for Alesis Nitro Mesh Kit Consist of 1x 10" One-Zone Pad and 1x 08" ON zones Tom Pad, Includes necessary rack clips, cymbal holder, L-rods and cables

Recent vizionate Note
Precision Devices PD.121/2 8 Ohms

Precision Devices PD.121/2 8 Ohms - 12" Speaker, Power Rating: 300W RMS, Impedance: 8 Ohms, Frequency Response: 100Hz - 6kHz, Sensitivity: 99 dB (1W1m), Weight: 9.2 kg

Recent vizionate Note
Patona Premium Akku V-Mount 95Wh

Patona Premium Akku V-Mount 95Wh BP-95W; V-mount battery with USB output; capacity: 95 Wh / 6600 mAh; voltage: 14.4 V; USB output: 5 V / 2.1 A; mount: V-Mount; 4-stage LED charge level indicator; eight cells; maximum discharge current: 10…

Recent vizionate Note
Warm Audio WA-MBA

Warm Audio WA-MBA; professional broadcast microphone boom; easy-to-operate clamping hinges; hidden cable management system;, Connectors with 3/8" and 5/8" thread, suitable for all common microphone mounts; integrated table clamp; Colour: black; Weight: 2.5 kg

1
(1)
Recent vizionate Note
Harley Benton AirBorne Go

Harley Benton AirBorne Go, hd modeling desktop guitar amplifier with built-in 2,4ghz wireless instrument system, bluetooth 4,2 dual mode connectivity, airborne go app for advanced tone editing, drum machine & rechargeable battery function, great features for wireless practice & play-along…

1
(1)
Recent vizionate Note
L.R.Baggs Voiceprint DI

Impulse Response di pedal for acoustic guitar Voiceprint DI measures the acoustic response of your guitar by leveraging the processing power of your iPhone® to accurately capture your guitar’s one-of-a-kind voice., Notch filter, Anti-feedback function, Phase circuit, Serial FX…

Recent vizionate Note
MOTU UltraLite mk5

USB 2.0 Audio Interface With USB C connector, ESS Sabre32 Ultra DAC technology, 24 Bit / 44.1 - 192 kHz, Precise level meters for all analogue inputs/outputs with high-resolution OLED display, 2 Microphone / line / Hi-Z inputs via…

Recent vizionate Note
Soundboks Backpack

Soundboks Backpack; fit all generations of Soundboks speakers; ergonomic comfortable design; easy to use and safe attachment of the speaker; made of stainless steel, nylon straps and foam pads; dimension (WxHxD): 510 x 430 x 220 mm; weight: 2,9kg; colour:…

Recent vizionate Note
Electro Harmonix Ripped Speaker Fuzz

Electro Harmonix Ripped Speaker Fuzz; Effects Pedal for Electric Guitar & Bass; low Fuzz settings emulate Vintage Lo-Fi Distortion Sounds created by a Razor Blade applied to a Speaker Cone, a loose Tube or a faulty channel on a Recording…

Trimite feedback-ul tau
Feedback Ați găsit o greșeală și doriți să ne împărtășiți opinia despre această pagină?

Abia așteptăm să mai auzim de la dvs și să rezolvăm orice problemă.