Thomann Orchestra Music Stand (4pcs)

Arată traducerea

Orchestra Music Stand Set

  • Perforated sheet music holder: 480 x 330 mm
  • Depth of sheet music holder: 45 mm
  • Height of stand: 650 x 1190 mm
  • Total height: Max. 1510 mm
  • One section of the stand can be extended
  • Diameter of upper extension tube: 25 mm
  • Diameter of lower extension tube: 31 mm
  • Material: Powder coated steel
  • Connection piece made of plastic (improved material since 2017)
  • Stand diameter (folded): Approx. 105 mm
  • Stand length (folded): Approx. 620 mm
  • Tube diameter (upper): 23 mm
  • Tube diameter (lower): 28 mm
  • Weight: Approx. 2.8 kg
  • Colour: Black
  • Package quantity: 4 Pieces

Informatii aditionale

Colour Black
Orchestral Music Stand Yes
Music Stand No
Sheet Music Holder No
Bag No
Accessories No
Total height < 1.500mm Yes
Total height > 1.500mm No
weight < 1,5kg No

Iată alte alegeri de-ale clienților:

Clienții care au vizualizat acest articol au cumpărat următoarele:

Thomann Orchestra Music Stand (4pcs)
44% au achiziţionat acest produs
Thomann Orchestra Music Stand (4pcs)
Disponibil imediat
Disponibil imediat

Acest articol este disponibil în stoc și se poate expedia imediat.

Informații despre livrare
55 € Adaugă în coş
Thomann Orchestra Stand Deluxe
11% au achiziţionat Thomann Orchestra Stand Deluxe 19,70 €
Thomann Orchestra Music Stand
10% au achiziţionat Thomann Orchestra Music Stand 15,90 €
Fun Generation Orchestra Stand
8% au achiziţionat Fun Generation Orchestra Stand 12,70 €
Millenium Laptopstand Tripod
5% au achiziţionat Millenium Laptopstand Tripod 19,70 €
Cele mai populare Pupitre
2655 Evaluările clienţilor
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 /5
  • Manipulare
  • Stabilitate
  • Măiestrie
Total
Manipulare
Stabilitate
Măiestrie
SUPER
samuel 1hutina111, 30.09.2019
REZISTENT
PRACTIC
FOARTE BINE FACUT
UTIL
IEFTIN
MERITA
De ajutor · De nici un ajutor · semnaleaza un abuz
Raportează evaluarea…

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive?

Trimitere raport
gb Recenzie originală (Arată traducerea)
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Total
Manipulare
Stabilitate
Măiestrie
Wonderful Music stand
GJK123, 08.10.2017
I?m really pleased with this music stand. I?ve been using this stand over the last few months and it has not let me down. I find it is very sturdy even with my heavier books. I use the book Hal Leonard Ultimate Rock Pop Fake Book which is a big heavy book!

Adjusting the height is very easy and it has a good range of useable heights. The stand is very portable and lightweight. The legs are very sturdy and rubber feet help the stabilize the stand too. You can also easily rotate and adjust the angle of the sheet holder. So it is very to get the music stand into a position that feels comfortable for you.

The only problem I have found is that there is a lip on the top of the stand and it?s makes it harder for my music clip to get a good grip.

Apart from that I have no other problems. I highly recommend this stand and I think it is well worth the price!
De ajutor · De nici un ajutor · semnaleaza un abuz
Raportează evaluarea…

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive?

Trimitere raport
gb Recenzie originală (Arată traducerea)
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Total
Manipulare
Stabilitate
Măiestrie
5/5
NicolaBH, 02.01.2020
feels like solid construction.
the surface is just larger than an A3 piece of paper
De ajutor · De nici un ajutor · semnaleaza un abuz
Raportează evaluarea…

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive?

Trimitere raport
gb Recenzie originală (Arată traducerea)
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Total
Manipulare
Stabilitate
Măiestrie
A Sturdy Piece of Kit? I certainly thought so, but not quite ...
Dr Bassman, 15.12.2019
~ INITIAL REVIEW ~

~ PREAMBLE ~

Please note that the following section: The INITIAL REVIEW is now followed by a SUBSEQUENT REVIEW, intended to provide an update on my views and use of this particular piece of kit.

~ INITIAL REVIEW ~

I bought this stand, primarily because it looked sturdy, solid, reliable, etc. I didn't want my music wobbling about in front of me while I was playing, and this stand looked ideal. More so, when it arrived, my reasoning seemed to be confirmed; it certainly looked like a strong, solid, reliable piece of kit. Happy days!

It's been used twice and on both occasions, it was fine. I mean, it's a stand, right?; what's to go wrong?; and nothing did. Until that was, I returned home with it and began setting the stand up in my living room. Now, I've been using all sorts of stands for decades. I've got lots of them and never have I had a problem with any of them: Until this afternoon, that is.

I was tightening the base tripod i.e., locking the position of the three legs by tightening a fixing screw/bolt against the stand's tubular column. Suddenly, I realised that the locking mechanism had come loose in my hand. A brief inspection revealed that the only part of the stand that was keeping the locking mechanism in place i.e., attaching it to the tripod, not the stand's tubular column, was a thin sheet of plastic, approximately four millimetres thick, in the middle of which was a threaded hole to accommodate the fixing screw/bolt. Apparently, whilst tightening the tripod into position, this small area of plastic had sheared all along its base and down one side, leaving it hanging loose and completely unfit for locking the tripod in position against the stand's tubular column.

As I said, stands are nothing new to me. I know how to tighten their locking mechanisms and this wasn't a case of over-tightening. On the contrary, to my mind, this is a simple design problem. The stand's designers found it acceptable to hold the locking mechanism for the tripod in place using a thin piece of plastic (absolute maximum thickness of 4mm). That doesn't sound like a good idea to me, because I'd hazard a guess that it needs a little more than that e.g., 5mm or more of steel plate, complete with a threaded hole, all held firmly in place so that it does not move, flex or shear. That might suffice to hold the thread of the locking mechanism rigidly in place, as it is required to be.

What's more, there's a real risk that this section of the stand will fail, catastrophically, rendering the stand useless. I mean, that's what happens to thin sections of plastic when subjected to any forces of any significance e.g. as will be found in locking mechanisms on music stands, etc.

And guess what?; that's exactly what has happened here. Why am I not surprised? Or am I missing something?

No matter, my advice: Avoid this product. It looks good but it has a major flaw: A wall of plastic, a few millimetres (4mm max.) thick is not fit for the purpose for mounting and securing a locking mechanism on a stand of this size. So I guess this is a cautionary tale. Systems usually fail at their weakest points and that's the case here. The problem is identifying these issues when you are purchasing such items. I certainly didn't see this one coming. But that's life; you live and learn, right?

However, ...

~ SUBSEQUENT REVIEW ~

Based on the above, I'm not using this stand: It's useless, right? Well, no, and I am; using it, that is. Although I am sure that an appropriate application of Superglue would have dealt with the sheared edges described above (and still might), I stumbled across another solution.

I had ordered a set of standard plastic g-clamps for another project. I then found that, by attaching one clamp immediately above and one immediately below the required locking position on the stand's tubular column, the stand attained a commendable level of stability. Just to make sure, I "threw" and "knocked" the stand about a bit; a test which it passed with flying colours. The result?; a perfectly functioning music stand.

I cannot change my initial findings e.g., this stand has a major design flaw, but this does show what a little ingenuity can do, don't you think?
De ajutor · De nici un ajutor · semnaleaza un abuz
Raportează evaluarea…

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive?

Trimitere raport
Variante produs
Thomann Orchestra Music Stand (4pcs)
(2655)
Thomann Orchestra Music Stand (4pcs)

Orchestra Music Stand Set Perforated sheet music holder: 480 x 330 mm, Depth of sheet music holder: 45 mm, Height of stand: 650 x 1190 mm, Total height: Max. 1510 mm, One section of the stand can...

Thomann Orchestra Stand Deluxe
(3339)
Thomann Orchestra Stand Deluxe
pagina produsului
19,70 €

Deluxe Orchestra Music Stand Extremely sturdy and high quality music stand, Detachable metal sheet music holder is perforated, Simple to set up and lock in place, Connection parts are made from...

Thomann Orchestra Music Stand
(7055)
Thomann Orchestra Music Stand
pagina produsului
15,90 €

Orchestra Music Stand Perforated sheet music holder with holes: 480 x 330 x 45 mm, Height of stand: 650 - 1190 mm, Total height max. 1510 mm, Stand is 1-way telescopically extendable, Stand length...

Thomann Orchestra Stand Premium
(882)
Thomann Orchestra Stand Premium
pagina produsului
19,90 €

Orchestra Music Stands Extremely stable high-quality orchestra music stand, Removable sheet music holder is made from steel, Connection parts are made from metal, Simple to set up and lock in...

Thomann Orchestra Stand Symphonia 50
(81)
Thomann Orchestra Stand Symphonia 50

Orchestra Music Stand With one-hand adjustment, Sturdy metal construction, Feet not hinged, but with small base, Closed desk made of aluminium, Height of stand: 885 mm to 1335 mm, Height of desk's...

Thomann Orchestra Stand One
(111)
Thomann Orchestra Stand One

Orchestra Music Stand Non-perforated desk, Made from metal, Height can be adjusted with just the one hand, 1-Way continuous telescopic extension (without fixed increments), Very low space...

Thomann Screwset Orchestral Musicstand
(58)
Thomann Screwset Orchestral Musicstand

Screw Set For Thomann Orchestra music sheet board (Article Nr 107195 ) Note: Screw nuts not included

Thomann Orchestra V-Block Prisma
(1)
Thomann Orchestra V-Block Prisma

Thomann Orchestra V-Block Prisma, Connecting piece Music desk/Stand, Screws included, For #264338 Thomann Orchestra Stand Premium

55 € 270,32 lei
Include TVA plus 20 € transport

Prețul în RON este doar de ghidaj!

Disponibil imediat
Disponibil imediat

Acest articol este disponibil în stoc și se poate expedia imediat.

Informații despre livrare

Livrare aprox. între Joi, 5.08. și Vineri, 6.08.

Reduceri pe volum
Cantitate Preț pe bucată Veți economisi
1 55 €
2
54 € 1,82 %
5
52 € 5,45 %
10
51 € 7,27 %
Share produs
Persoane de Contact
telefon: +49-9546-9223-60
FAX: +49-9546-9223-24
Recent vizionate Note
Kali Audio IN-8 2nd Wave

Kali Audio IN-8 2nd Wave; Active near field monitor; 3 way system with coaxial midrange/tweeter; 8" woofer; 4" midrange; 1" soft dome tweeter; power: 140 Watt (60/40/40 Watt Tri-Amped); frequency range: 37 Hz - 25 kHz (-10 dB), 45 Hz…

5
(5)
Recent vizionate Note
SSL UC1

USB DAW Controller Plug-in controller with convenient mixer layout and legendary SSL workflow, 1:1 Hardware control for the included SSL plug-ins Channel Strip 2 and Bus Compressor 2, Visual feedback via LED rings on the knobs, Display for showing…

Recent vizionate Note
Novation Circuit Rhythm

Novation Circuit Rhythm; sampler / sequencer; 8 sample tracks with 32 step patterns each, cascadable for up to 256 steps per track; functions: slice, reverse, loop, chromatic play, probability and pattern-mutate; integrated effects such as lofi tape, shutter, reverb, delay…

1
(1)
Recent vizionate Note
Arturia Keystep 37 Black Edition

Arturia KeyStep 37 Black Edition; 37-key (slimkey) USB controller keyboard; velocity-sensitive mini-keys with aftertouch; 64-step sequencer; chord and scale functionality; arpeggiator; LED display; 4 freely assignable knobs; transport keys; touch stripes for pitch and modulation; RGB LED bar; connections: 3x…

Recent vizionate Note
Fender SQ Aff. P Bass MN PJ PACK BK

Fender Squier Affinity P Bass MN PJ PACK Black; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: c; Fingerboard: Maple; Inlays: Black Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 41,3 mm…

Recent vizionate Note
Neural DSP Quad Cortex Gigcase

Neural DSP Quad Cortex Gigcase; Softlight Case for Neural DSP Quad Cortex Pedal; precision molded, high-impact and designed to keep your Quad Cortex safe from damage and the elements; the top clamshell includes a secure, elastic neoprene panel where you…

Recent vizionate Note
Fender SQ Aff. Strat HSS PACK CFM

Fender Squier Affinity Stratocaster HSS Pack Charcoal Frost Metallic; Stratocaster Electric Guitar Set; Affinity Series; Body: Poplar; Neck: Maple; Fingerboard: Laurel; Neck Mount: Bolt-On; Neck Shape: C; Inlays: Pearloid Dots; 21 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 42…

Recent vizionate Note
Harley Benton CLA-15MCE SolidWood

Harley Benton CLA-15MCE SolidWood; Auditorium Cutaway Acoustic-Electric Guitar, Custom Line Solid Wood Series; Back & Sides: Solid Mahogany; Top: Solid Mahogany; Neck Shape: Oval C; Neck: Mahogany; Fingerboard: Pau Ferro; Scalloped X Bracing; Inlays: SnowFlake Inlays; 20 Frets; Nut: Bone;…

Recent vizionate Note
Wampler Gearbox Dual Overdrive

Wampler Gearbox Dual Overdrive; Effects Pedal for Electric Guitar; Andy Wood Signature Pedal; features modified versions of two of Brian Wampler’s best loved drive Circuits: Channel 1 based on the Tumnus and Channel 2 based on the Pinnacle; top-switchable Stacking…

1
(1)
Recent vizionate Note
Sennheiser CX True Wireless Black

Sennheiser CX True Wireless Black In-Ear headset headphone - 7 mm hight end drivers, bluetooth 5.2, up to 9 h running time, up to 27 h with charging case, SBC, AAC, aptX Codec compatible, 110 dB SPL (1 kHz /…

Recent vizionate Note
J. Rockett Audio Designs Clockwork

J. Rockett Audio Designs Clockwork; Analogue stereo delay with switchable modulation; Designed in collaboration with Howard Davis (creator of the original "Deluxe Memory Man"); Classic analogue design with BBD chips; Tap-tempo control digital; Up to 600 ms delay time; Switchable…

Recent vizionate Note
Bowers & Wilkins PI 7 CG

Bowers & Wilkins PI 7 CG; In-Ear True Wireless headphones; true 24-bit Audio-connection; 2-way-driver design; high performance DSP; Bluetooth 5.0 with AptX Adaptive technology; adaptive, active Noise Cancelling (ANC); charge case with audio-transmission; wirelesse and USB-C charge; supports quick charge;…

Trimite feedback-ul tau
Feedback Ați găsit o greșeală și doriți să ne împărtășiți opinia despre această pagină?

Abia așteptăm să mai auzim de la dvs și să rezolvăm orice problemă.