Conectare la centrul de clienți
Țară și limbă Country and Language

t.akustik Contact Glue

1523

Acoustic Adhesive

  • For acoustic convoluted, pyramids and basotect
  • Solvent-free
  • Elastoplastic
  • Single-component special polymer adhesive
  • Fast-curing and more universal than structural and assembly adhesives
  • Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
  • Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
  • 310 ml/ 490 g Cartridge
  • For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
  • Note: Working temperature + 5° C to + 50° C
  • Storage: Cool and dry at + 5° C to + 25° C
  • Skin building time: 10 - 15 min
  • Colour: White
  • Consistency: Pasty
  • Base: Polymer dispersion
  • Spec. mass: Approx. 1.58 g/cm
  • Protect from frost and heat
  • Suitable hand-held cartridge gun: Article Nr.

    417630

    (not included)
  • New follow-up product: Article Nr.

    481723

    (not included)
Type Mounting Material
numărul articolului 177265
4,90 € 24,24 lei
15,81 € / l •
Include TVA plus 20 € transport
Prețul în lei este doar de ghidaj!
Reduceri pe volum
Preț pe bucată Veți economisi Cantitate
4,90 € 1
4,65 € 5,1% 3
4,49 € 8,4% 5
4,29 € 12,5% 10
Disponibil imediat
Disponibil imediat

Acest articol este disponibil în stoc și se poate expedia imediat.

Informații despre livrare
Livrare aprox. între Miercuri, 27.10. și Joi, 28.10.
1
2 Nivel de vânzări

1523 Recenzii clienți

5 1001 Clienți
4 300 Clienți
3 125 Clienți
2 48 Clienți
1 49 Clienți

Măiestrie

D
the t.akustik Akustik-Kleber
Doru_zta 05.11.2020
Un adeziv care isi face treaba
Am lipit panourile acustice si deocamdata nu au cazut jos :)
Nu am recenzii negative la acest produs
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
K
Glue that works and is easy to apply - read on to find out how
Kristian2622 04.01.2016
Before I applied the glue, I had read pretty much all reviews here and realized that there's a bit of confusion as to how the glue should be applied and used. I put the best together, applied some common sense and ... it worked :)

This was the first time I attached acoustic panels onto a wall using a glue, and a second time in my life I used the sealant gun. 5 days after the application, the panels are still in place.

So.... If I could do it, you can do it.

What you need:

- Sealant gun to apply the glue.
You can get one in ANY hardware/DIY store. The glue bottle is exactly like the bottles bathroom sealants come in so any sealant gun would work. It can also be called a 'caulking gun'.

- Pencil, measuring device and spirit level (ideally a laser one).
That's all for measuring and making sure that your panels are nicely levelled. You want your studio to look professional, not sloppy.

- A nice wall.
Here's the deal - for any glue to work, it must form the bond with both surfaces. This will not work if your wall is greasy, dirty, painted with water-repellant paint etc. You may want to repaint your studio walls and ceiling with at least two layers of basic, non-glossy paint... and then wait a couple of weeks for the paint to dry out properly. This was exactly what I did after moving in to my new place.

- A helper.
Large acoustic panels will block your view of the markings you made on the wall. A second person will help you move the panel precisely to the desired position.

Important!
Do one tile/panel at a time and keep the window open. The glue does not stink much, but you can certainly sense the smell.

1. Plan ahead - make sure you know where you want to put your acoustic tiles/panels. I used several sheets from a common squared paper notebook.

2. Apply the glue on back side of the panel/tile.
Small tiles: 5 blobs (1 cm circle) of glue - 4 corners (1.5 cm off the edges) and center. You'll do no wrong if you just create a simple square and a blob in the middle.
Large panels: Create a wave pattern around the perimeter of the panel about 2 cm from the edge). Then do the same connecting the opposite corners (think 'confederate flag'). I'd attach a photo but there's no such option here.

3. Carefully lift the panel/tile and take it to the wall - maneuver it to the desired position but still keep it 2-3 centimeters (1 inch in old money) from the wall. Here's where the helper comes in to make sure you hit all the marks you made on the wall.

4. Press the panel/tile against the wall.

5. Apply mild pressure along the areas where you applied the glue. You will feel how the tile/panel is actually sucked onto the wall.

6. Move on to the next panel...

One tube was enough for 7 pieces of EQ Acoustics Classic Wedge 30 tiles and 8 pieces of t.akustik HiLo-N40 panels.
Măiestrie
35
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
E
Very Helpful
EMTH 28.09.2020
I did what it was supposed to! Just remember to buy enough.
You use it very fast!
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
MD
Excelente.
Marco Di Cesare 02.10.2021
Buena pega que pega lo que se tiene que pegar, huele bien, pero no sabe tan bien. Recomiendo no comer.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

Consultare