Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
finally THE MIDI cable
i juggle with midi and midi cables since 15 years and this is the most useful and surely definitive solution for cable management.
no ONE midi device has the midi plugs in the same mounting direction, so when you get a L cable bear in mind you are just lucky if the L goes the way you want.
straight midi plugs need a lot of real estate , and in a pedalboard you can be out of that space quickly. this is genial, you can plug the cable and just turn it the way you need it to go (obviously in the two direction possible, up or down, or left or right , depending how the midi plug on your device is mounted)
the best midi cable i foud until today. the only thing better would be a rotating cable-bender like the one mounted on this but 360 degree. that would be priceless.
no ONE midi device has the midi plugs in the same mounting direction, so when you get a L cable bear in mind you are just lucky if the L goes the way you want.
straight midi plugs need a lot of real estate , and in a pedalboard you can be out of that space quickly. this is genial, you can plug the cable and just turn it the way you need it to go (obviously in the two direction possible, up or down, or left or right , depending how the midi plug on your device is mounted)
the best midi cable i foud until today. the only thing better would be a rotating cable-bender like the one mounted on this but 360 degree. that would be priceless.
2
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
C
Greate space, saver, but ...
This MIDI cable has a couple of interesting characteristics that make it suitable for pedalboards in particular:
- the cable profile is flat and not round, allowing for more precise cable routing
- the angle of the connector can be varied
This comes tho with some caveats:
- the connector and it's pivots are from cheap plastic, it's very easy to break them
- before buying, you will have to verify if the angle is ok with you (i.e. this cable will bend vertically above or below the MIDI socket but maybe you might find cable that are angled laterally more comfortable)
- unscrew/screew the plastic holder frame to rotate, you can rotate the connector also without but you'll put unnecessary stress on the cable
- the cable profile is flat and not round, allowing for more precise cable routing
- the angle of the connector can be varied
This comes tho with some caveats:
- the connector and it's pivots are from cheap plastic, it's very easy to break them
- before buying, you will have to verify if the angle is ok with you (i.e. this cable will bend vertically above or below the MIDI socket but maybe you might find cable that are angled laterally more comfortable)
- unscrew/screew the plastic holder frame to rotate, you can rotate the connector also without but you'll put unnecessary stress on the cable
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Keep your cables under your board
Very helpfull construction,allows you to set an angle connector the way it fits with your pedal's midi ports. No matter if the pins of your device are in "smile" or "eye brow" shape, you can turn the connectors to any direction you like, by using a screw driver. In this way,not only you keep a clean board,but you also ensure that your connectors will live forever. For the midi users it's a must!
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
m
not great at all
This lead is really stiff and hard to insert into a MIDI socket. The ends of the screws come though the bolts and dig into your hands when inserting the plug. After a few weeks the outer plastic comes off to reveal a cheap glued interior. The lead may be ok for a one off job and then leave, but if you need to unplug it regularly then you will have sore fingers. It's on of the worst I have used in a studio of over 30 vintage synths.
Pro - it can bend
cons - it's badly finished, rough to use
Pro - it can bend
cons - it's badly finished, rough to use
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
b
Sturdy and versatile
I needed short MIDI cables for creating a chain of various equipment in limited space. The cable length and rotating connectors fit the task perfectly. The small screws can be loosened for easier bending of cord, than tightened again. The MIDI connectors are sturdy, collar and pins are firmly set in plastic.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
e
Great for tight spaces
I have bought several of these cables for my portable ultralightweight dawless setup.
The space is premium, so I needed shortest possible MIDI plugs available with the ability to select the orientation of the pins - some gear has pins on the top, some on the bottom.
These cables (They as well have 30 cm version) are rock solid, easy to setup.
Might seem a little bit pricey, but couldn't find anything else to suit my needs cheaper, so that's that.
The space is premium, so I needed shortest possible MIDI plugs available with the ability to select the orientation of the pins - some gear has pins on the top, some on the bottom.
These cables (They as well have 30 cm version) are rock solid, easy to setup.
Might seem a little bit pricey, but couldn't find anything else to suit my needs cheaper, so that's that.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
MC
Perfect for Pedalboards.
I use these for routing midi on the pedal board, small and space saving!
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Plastic feels a little cheap and I'm always worried when changing the bend angle that it stops working but it has yet to. If you're as short on space as I am can highly recommend
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
TG
Very good build quality
i've had it for a month now and I've had no problems with the cable so far. The whole angle thing is great but you need to have the specific tool to unscrew the bolts that enable the feature.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
B
Angle joints
This is best for hooking up MIDI in small tight places. HQ cable
0
0
semnaleaza un abuz
