Harley Benton Solder-Free Patch Cable KIT

576

Kit for solderless patch cables

  • Consisting of 3 metres of cable and 10 angled plugs
  • Solder-free plug for precise mounting in seconds to the exact lengths required, for an individual pedalboard cabling
  • Excellent signal flow and low capacity for maximum transparency
  • 7x 0.15 mm copper conductor
  • Semi-conducting PVC and a braided copper / aluminium shield protect effectively against interference
  • Extra slim gold plated metal plug
  • Incl. cable cutter, screwdriver and assembly instructions
disponibil din Noiembrie 2017
numărul articolului 410584
unitate de vânzare 1 bucată(ăţi)
Colour Red
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Connector from 6,3mm TS Jack
Length 300 cm
Plug out Jack 6,3mm TS male
Mai mult
88 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Joi, 25.04. și Vineri, 26.04.
1

576 Evaluările clienților

4.3 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

420 Recenzii

MT
Easy and cheap
Mihai Tanase 30.01.2022
Very easy to install and looks professional...perfect sound with no buzzing
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
VV
2 stars for the number of live shows that these cables worked on. Great for home, not so great for life on the road!
Vlad Vartosu 22.09.2021
I bought 4 of these kits for my entire pedalboard, approx. 19 pedals. I wanted to rewire and bring some cleanliness to it, which it did. The jacks and cables are fairly discreet and can bend to whatever shape you please, thus making a busy board look a lot tidier.

However, quality-wise, I am waiting and hoping that Harley Benton will revise this kit and make it a lot more reliable. Please bear in mind, this is not a good solution if you are a touring musician, and your show depends on your pedalboard. The connection of these cables is held together by a screw, and if you add that to a board that sits in a back of a car and bus, gets pulled to the stage in and out night after night, this system is doomed to fail in no time.

I am speaking out of personal experience, the cables failed me after only two live shows on the road.

However, I would recommend this kit to anyone who wants to build a board at home, wants full control of customization, and doesn't want to spend a fortune on patch cables.

I thought they were going to be the ideal solution for my pedalboard, but I will go back to soldered connections.

Thank you nonetheless, it was a good lesson learned.
Măiestrie
8
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
R
Outstanding value for the money
Ricardo. 16.01.2024
The set is perfect for pedalboard building. It comes in a correct packaging and includes the necessary tools for assembly.

Setting up the cables is very easy, measure the desired length, trim both ends and screw the heads.

The quality is very good, both for the cables and the plugs, and audio signal is unaltered, I haven't detected any unwanted noise after a couple months of intensive playing.

The only aspect that could be improved is the trimming tool, it is much easier to get a clean cut with a cutter or exacto knife than with the tool included.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
P
CLEAN CUT!
Photologik 13.03.2022
The Harley Benton solder-free patch cable kit is very useful, easy to make and the best price around!

Sometimes I just want to try a different configuration on my pedalboard and it's not always easy to find a patch cable with the right size and small connectors. This kit solves the issue!

To be honest, it took me a while to get this to work, I noticed that using a very sharp wire cutter works best (not the one provided), a clean cut is imperative. You've been warned.

I thought the cable would be better quality and initially I was a bit disappointed but actually the overall quality of this product is very good, I haven't experienced any noise so far and the advantage of it being so small makes it fit everywhere. That's a big plus!

Personally, I wouldn't use these cables for a permanent setup, it could be done and possibly I'm just old fashioned but to me this is more as a quick fix while experimenting with pedals or optimizing the pedalboard.

This kit is useful in many situations and cables can be done anywhere, fast and easy. It's a valuable asset in every guitarrist backpack.

PROS:
- simple, fast and easy to make
- good quality
- very small
- price

CONS:
- reliability (may not work every time or stop working. Handle them carefully)
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz