the sssnake PPS1015

1599

The sssnake PPS 1015

  • 1.5 m Speaker cable, 2 x 1.5 mm² cross section
  • 6.3 mm Jack - 6.3 mm Jack
  • Suitable for passive speakers - not for active speakers
Disponível desde Maio 2002
número de artigo 153218
unidade de venda 1 peça(s)
Length 1,50 m
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Cable Diameter 2x 1,5 mm²
€ 3,99
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Quinta, 4.04. e Sexta, 5.04.
1

1599 Avaliações de clientes

4.5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

481 Críticas

W
Faz muito bem a sua função.
Whitebat 10.05.2020
Um cabo simples, ligar a sua cabeça a uma coluna passiva e desempenha muito bem o seu papel, ter um destes como back-up é uma boa opção.
acabamento
0
0
Reportar a crítica

Reportar a crítica

G
Preço e qualidade
Gbusato 17.07.2023
O SSsnake PPS1015 é um cabo de coluna de alta qualidade que oferece uma ótima performance e é fácil de usar. Ele é feito de cobre OFC de alta pureza e é blindado para evitar interferências externas. O cabo está disponível em uma variedade de comprimentos, para que você possa escolher o que melhor se adapte às suas necessidades
acabamento
0
0
Reportar a crítica

Reportar a crítica

F
F_MENEZES 27.01.2019
A carcaça do pluge desenrosca com facilidade. No mais, é um bom produto.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Good cable
Anónimo 20.02.2017
This cable is intended to transfer power from an Amp Head to a speaker cabinet so it's a quite different item with respect to signal cables used to feed the amp from an instrument.

To be clear, signal cables have to correctly transfer voltage signal while power cables have to transfer both voltage and current information, a power signal at the end.

Depending on the power of your amplifier, tens or even hundreds of watts can be handled by this class of cables.
It becomes really important that the dissipation of the cable is minimized; this aim is achieved when the resistance of the cable is minimized.
And the resistance is minimized when both the cable length and resistivity of the copper conductors are minimized.
This is the reason why I've chosen a quite short cable.

About the resistance, the value this cable exhibits is negligible: my digital multi-meter is not able to correctly measure it because so low that it's below the instrument accuracy.

I do not use the cable for high wattage and I'm really satisfied with its performance.
The only feature I would reconsider is the jack shape: because the place I use my amp, a 90 degree connector is preferable. This is something I suggest you to evaluate before buying but this is NOT an issue with the cable; it's simply a matter of personal use constraints.
acabamento
2
0
Reportar a crítica

Reportar a crítica