Rode Stereo Bar SB20

354

Mounting Rail for Stereo Microphone Pair

  • For tripod mounting of two microphones
  • Material: Robust ABS
  • Precise angle and distance markers for positioning the microphones according to ORTF, XY or small AB
  • Two slidable 3/8" threads
  • Spacer can be used above or below
  • Dimensions (H x W x D): 170 x 240 x 70 mm
  • Weight: 45 g
  • Colour: Black
Disponível desde Abril 2014
número de artigo 339661
unidade de venda 1 peça(s)
Component type Stereo Bracket
€ 39
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Quinta, 28.03.
1

354 Avaliações de clientes

4.7 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

198 Críticas

S
Bom
Starraw 12.08.2023
Poderia ter um pouco mais firmeza pois leva algum peso
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
D
Helpfully light, but watch your fingers.
DrCheese 02.02.2021
I got this to be able to arrange SDCs for stereo XY and ORTF. Few stereo bars include the height offsets that this one does. It is made of plastic which initially seems disappointing, but is probably useful for keeping the weight down (useful if the stereo bar is on the end of a boom arm). The choice of plastic in its design means that it is slightly chunkier - this is not an inconspicuous stereo bar which might be a consideration if recording recitals.
It is slightly longer that most stereo bars.
The markings are not terribly useful in adjusting for XY/ORTF. This might depend of the length of the SDCs or LDCs you are using. I would still recommend the use of a cutout for setting up ORTF.
The thread on the screws is rather sharp and removing the offsets requires some effort. I already sliced a finger once doing this. Rode do warn you about this sharpness in the leaflet, but I don't understand why they didn't just round the edges of the threads slightly. I will concede that I have 'city hands' though.
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
j
Buy without hesitation if you want to use different stereo mic techniques
jwork123nl 06.03.2019
Sturdy but lightweight plastic bar that I bought to experiment with small condensor mics in various configurations (ORTF, XY, 20cm parallel) for recording my grand piano. Works very well for this, includes very handy markings to make your setup reproducable each time. Also reduces the amount of stands and the general clutter in the area of the piano :-)
Contains an adapter so it works with two sizes of microphone stands (5/8 and 3/8)

I think it is a little expensive for what it is, but there seems no good alternative, so I would buy it again!

ps Note that max spacing for the mics is about 20cm.
3
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
JV
Nice quality, a little bit smaller for AB spacing
J VEL 02.11.2017
I took this product mainly to be used for ORTF setup and it is quite easy to position the mics right.
I doubt it will be suitable for AB omni space position due to short lenght (about 20 cm), so in case you need AB in 40 to 60 cm distance, Rode is not for you.

Overall, great quality and recommended by me.
1
0
Reportar a crítica

Reportar a crítica

YouTube sobre este assunto