Rockboard S-Connector nickel

354

Straight Pedal Connector

  • Length (plug to plug): 12 mm
  • Allows for the shortest possible connection of two pedals
  • For pedals with side-mounted sockets
  • Suitable for pedals with side panels at a 90° angle to the floor
  • 6.3 mm Mono jack socket on both sides
Disponível desde Fevereiro 2017
número de artigo 404982
unidade de venda 1 peça(s)
Length 1,2 cm
Colour Silver
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Connector from 6,3mm TS Jack
Plug out Jack 6,3mm TS male
Mostrar mais
€ 1,96
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Sexta, 19.04.
1

354 Avaliações de clientes

4.4 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

171 Críticas

CF
Does the job
Carlos F. S. P. 12.05.2023
Really nice to have boss pedals organized and really close!
acabamento
0
0
Reportar a crítica

Reportar a crítica

FF
destruidor de jack de pedal
Felipe Fatiota 12.08.2020
esse tipo de conector duro, assim como os outros em S, em Z, são terríveis para o jack dos pedais. Ele pode até poupar espaço no seu pedalboard, mas alguma hora os jacks vão estragar e você vai ter de mandar consertar seus pedais.
eu evitaria usar esse tipo de conector. simplesmente não é bom para os pedais
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
b
Don't buy this style of connector.
benash 13.10.2018
Ive recently been building a pedal board for the function band shows I do. I own couple of Boss Pedals and have been trying to find a way to take up as little space as possible on my board. Usually this style of connector wouldn't be possible, but as I am using the same company pedals, the jack sockets line up perfectly... or so I thought.
I plugged two pedals in, and they seemed to work perfectly. So I wired everything up and took them on a gig. Cut a long story short, everytime I hit either of the pedals, there was a weird crackling sound. So after the gig the next morning I ran a few tests. Basically even though the Boss pedals appear to have the jack socket in exactly the same place, they're ever so slightly different. So whenever I pushed on one pedal, It would act as though I was pressing down on the jack socket on the other, therefore creating the noise.
Its a shame as these connectors are cheap, and small. As an alternative, I recommend "Rockboard" or 'EBS" patch leads. Thomann sell both. No noise, and equally as compact.
acabamento
4
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
k
kostas_v 09.07.2018
I bought this to connect some guitar pedals and for what this connetctor is, it has decent build quality and doesn't create unnecessary noise. You really should look into connectors like these before buying them, though.

In most cases these are unsuitable to connect pedals from different brands as they place the jacks at different heights. Even on pedals from the same brand, due to imperfections or slight differences in manufacturing, the jacks may be at slightly different heights, and you can't really connect more than 3-4 pedals without noticing some obvious curvature. This puts strain on the jacks and could potentially damage them, especially when you press down on them.
You don't save THAT much space either, especially if you have flat patch cables, in which case, they take up about the same space. Overall, you should probably look into getting some patch cables if you're looking to use them on a pedalboard.
acabamento
1
0
Reportar a crítica

Reportar a crítica