Radial Engineering Tonebone Bigshot ABY/Y MKII

63

ABY Amplifier selector

  • Passive operation - no power supply required
  • True Bypass
  • Ground lift switch for output B
  • Phase reversing switches to match the phase orientation of the amplifiers
  • Switch for internal transformer isolation to eliminate hum
  • Toggle A / B foot switch
  • Both foot switch
  • 6.3 mm mono jack input
  • 6.3 mm mono jack tuner output
  • 2 x 6.3 mm mono jack outputs
  • Power supply via 9 V DC power supply (not included) with polarity (-) inside and min. 120 mA
  • Status LEDs
  • Metal housing
  • Power supply only required for status LEDs
  • Dimensions (L x W x H): 96 x 92 x 52 mm
  • Weight: 560 grams
  • Made in Canada
Disponível desde Março 2017
número de artigo 409364
unidade de venda 1 peça(s)
Type A/B/Y
LED Display Yes
PSU Connector Yes
Shape Floor Effects Pedal
MIDI Interface No
Number Of Channels 1
Inputs 1
Outputs Per Channel 1
Grd Lift Switch 1
Design Footswitch
Mostrar mais
€ 159
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Segunda, 29.04. e Terça, 30.04.
1

63 Avaliações de clientes

4.7 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

características

acabamento

37 Críticas

m
nice
mUsike_ 05.06.2018
I bought it one month ago and I?m just in love with it, couldn't ask for better.
Top quality.
Recomend for those who are searching for a similar product.
Cheers
características
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Nice ABY
Seungku 16.04.2018
I needed to run two amps at the same time, while I was recording. So, I was in hunt of nice ABY switch and this came up.

Pro: It has every features proper ABY switch should have. Built like tank, has enough LEDs so you know where your signal goes. On output [B], ground lift and isolation transformer to eliminate ground hums and buzz, can reverse polarity to prevent phase problem between two amps. Very effective and thoughtful.

Con: There's noticeable tone shifting when you engage 'Isolation transformer' on. So you had to tweak amp's knobs on output B again to get the sound you like.

If you are looking for proper ABY switch, look no further. Get this. I am giving just 4 stars because after recording, I hardly use it in actual gig or practice situations.
características
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
K
Great piece of gear!!
Katito 04.07.2017
Used to have problems with ground loops while playing in stereo, the noise was just unbearable. Since I purchased this well constructed metal chassis pedal everything works as it should, not to mention that both amps work in fase now. It's smaller than it seemed in the photos which is nice to save space in the pedal board. No power needed unless you want to know where you're at, and in that case the LEDs let you know if you're playing A, B or both amps. Probably the most robust pedal I have, I'm very happy with it! Highly recommended if you play in stereo!
características
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
KA
KIKI ARIKI 06.07.2020
So far this meets my expectations well. Have used it to send one signal to an amp with solid state preamp/ tube power amp, and the other signal going to DAW via a USBinterface. Very quiet. Also worth mentioning I used an isolated power supply. When tried with 2 Amps, the previously mentioned one and a Blackstar id core 40 v2, ground lift helped to remove some noise. However there was some higher pitched noise from the Blackstar. I suspect it is something to do with the digital amp circuitry. I am yet to try the device with two completely non digital amps. With both setup scenarios I did not notice any tone loss.
características
acabamento
0
0
Reportar a crítica

Reportar a crítica