Millenium RW-2001

286

19" Carriage with Rollers

  • Solid 12U construction with adjustable 8U bottom
  • Load bearing capacity up to 35 kg
  • Height: 120 - 140 cm
  • Width: 65 cm
  • Depth: 60 cm
  • Weight: 7.8 kg
  • Colour: Black

Note: Delivered unassembled.

Disponível desde Novembro 1999
número de artigo 129415
unidade de venda 1 peça(s)
usable height in U 20 U
Material Steel
Wheels Yes
Type Trolley
Height min. 1200 mm
Height max. 1400 mm
Special Design Frame Construction, Rotatable Top
Weight 8,3 kg
Mostrar mais
€ 66
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Quinta, 25.04.
1

286 Avaliações de clientes

4.1 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

estabilidade

acabamento

147 Críticas

A
excelente
AZORES 19.08.2020
muito bom, relação preço qualidade, deveria ter acessórios como os parafusos para aplicar os equipamentos na rack uma vez que trás poucos para a capacidade que o equipamento tem
estabilidade
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
K
Awesome Rack
Kitapci 02.10.2014
I use this to mount a Behringer Xenyx 2442fx (located in the top adjustable angle rack) with rack gear such as headphone amplifiers, gates, reverb, ect along the bottom rack. This comes with plenty of places to mount rack equipment and is especially useful if you have a lot of them. My band uses our own small set up for band rehearsal but being the drumming it was a bit awkward having the mixer in accessible reach to change any monitor mixes on the fly, luckily with this I was able to bring the mixer and the outboard gear much closer when at the drums and push it neatly away when band practice had finished.

I can also see this being very useful in a home studio set up that lacks a patch bay as it is much easier to move this around and get to the back of equipment than in a usual cabinet of rack equipment.

However there is an issue with this style rack, since its not a cabinet all of the cabling is on show so unless you have velcro cable ties it can look a bit messy and can often run over cables on the ground when moving around if you're not looking.
Another issue isn't with the product but rather with the manufacturer; it doesn't come with any instructions which does mean you have to figure it out as you go, but even with that it only took around 5-10 minutes to build.

Over all its a great product and very good price point.
estabilidade
acabamento
3
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
DJ
Disappointing purchase
Derek J. 12.11.2013
Screw holes in the top section of the rack were unevenly placed resulting in racks that were lopsided 0mm on the left and 4mm! on the right. One of the rack spaces was unusable. Had to experiment with the placement of my various rack units (1U, 2U, 3U) to get them into the rack. Very frustrating. I understand this is a cheaply priced unit. but misaligned screw holes is totally unacceptable. Minor observation - when assembled the using didn't sit flatly on the floor - one of the wheels had to be adjusted substantially to stop the unit rocking.
estabilidade
acabamento
7
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
H
Great for the price; just update the assembly drawing!
Hogar 31.10.2017
This is a fantastic product for this price!
The only thing is that the assembly drawing is confusing, and that they packed the wrong tool (1 inbus/hex tool was wrong size). The drawing shows that all 4 wheels have brake mechanism, when in fact only 2 have those (which is OK, but it does not help assembling). Also, the drawing shows that 6 of the screws are "butterfly" type, but they are NOT provided in the package (only plain inbus/hex screws). The product photos on Thomann site are true to the package.
estabilidade
acabamento
1
0
Reportar a crítica

Reportar a crítica