Millenium DS100

568

Table Tripod

  • For clamp and screw mounting
  • Extendable arm
  • 3/8" Thread
  • Total length: 480 mm
  • Integrated microphone cable XLR male to XLR female
  • Total cable length: 250 cm
  • Especially for press conferences and broadcast
  • Maximum load capacity: 1.5 kg
  • Colour: Black
  • Incl. thread adapter from 3/8" to 5/8"
Disponível desde Novembro 2009
número de artigo 234703
unidade de venda 1 peça(s)
Type Microphone Boom
Height 185 mm – 565 mm
Colour Black
Weight 1,1 kg
Mostrar mais
€ 24,90
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Quarta, 20.03.
1

568 Avaliações de clientes

4.5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

estabilidade

acabamento

276 Críticas

A
AnaLua 17.12.2020
Este suporte foi pensado e consequentemente, comprado para ser usado com o microfone Rode nt1-A. (microfone ligeiramente pesado e maciço).
Quando vi o tamanho do suporte "Millenium" não estava à espera que fosse tão pequeno mas surpreendeu-me bastante pela positiva em ação com o Rode.

Vantagens:
- Ocupa pouco espaço e por isso serve bem para pequenos e reduzidos "setups" de montagem;
- Adaptável com o sistema de Gancho a diversas plataformas/ mesas/ tábuas;
- Sistema de fixação mais permanente também incluído;
- Facilmente transportável;
- Apesar do tamanho ser pequeno tem um sistema de sustentação com bastante força (estou a usar com o Rode NT1- A e com o shock mount original deste mesmo micro- também ele pesado) ;
- Um pouco mais acessível a nível de preço comparativamente ao que existe no mercado;
-  Já inclui um cabo para ligar ao micro (com qualidade de acordo com as experiências de gravação). 
 
Desvantagens:
- Por ser Pequeno e portátil o braço é curto (poderia ser um pouco maior) e não tem grande alcance (terás que colocá-lo mais perto de ti);
- O cabo que vem não é muito longo e não é tão facilmente substituível (mas é possível substituir);

Estou acima de tudo surpreendida pela força e portabilidade deste suporte. 
De acordo com o que procurava e por todos os motivos já referidos, fiquei satisfeita.
1
0
Reportar a crítica

Reportar a crítica

T
TVidal 01.09.2019
Faz o seu trabalho. Tem duas formas de se prender à mesa e já vem com um cabo XLR imbutido. Tudo é muito sólido. A parte negativa é que se procuras uma maior flexibilidade nos movimentos aqui não encontrarás. Se isso te é indiferente, pelo preço é mesmo um "must have".
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Much more than I expected
ABassPlayer 15.07.2015
I originally bought this stand as a compact alternative to the Millenium MA-2050, and I have to say I'm happy I made the purchase.

I can really see this a great alternative for those who do not have the budget nor care for the flexibility and features of something like the Rode PSA-1 (Also a great stand by the way)

The build quality on this really is great, the hinge is really nice and chunky and has no problem flying my sE 2200 A even with the arm extended, so it would be just fine with something the size of an SM58

It also comes with two mounting options: a stand that can be screwed into a desk with three screws (included), or a clamp that attaches to the edge of a table. The clamp has a foam pad which contacts the top of your surface to prevent scratches, which I think is a nice touch.

The cable is also of good quality too with Switchcraft style connectors- but not actual switchcraft, it's also a decent length to manage on the average desk or to hide away to plug into an extension if that's your use case, and the cable itself feels good.
I'll also point out that while the plugs are not genuine Switchcraft they are very solid, the soldering is also very clean on both ends of the cable.

It has a 3/8 thread but comes with a 5/8 adapter, nice to have around but not that I had a shortage.

There are a few minor cons though.

The way the stand attached to the base is simply by inserting the shaft into a socket and then tightening a screw on the base and is not threaded, so it's not possible to screw the stand into something like a round cast iron base.
There's also some room left in the socket, but this has not caused any stability issues when the screw is tightened.

This isn't a problem for me, but the screws that are included for the desk mount are perhaps a little on the short side, and while I doubt this would lead to any issue with stability, it does seem possible that a good knock could pull the screws right out of a surface made from chipboard or similar material.

Lastly, while the included cable is of good quality, it may limit the possible range of adjustments as the cable runs through the boom arm. You can, however, easily remove the cable but unfortunately this would require the removal of one of the XLR connectors on what is otherwise a fine cable.

In short:
Solid build quality
Fine with heavier mics, perfect for dynamics and SDC's
Good quality cable included (also easily removable/replaceable)
Flexible mounting options
Not the absolute best design in the world, but is still exceptional value.

Would purchase again... and again. Recommended.
5
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
j
Really really good for the price
jplebre 25.03.2020
As other reviews suggested, this isn't the sturdiest stand, the easiest stand to operate, but for the price you can't go wrong!

I decided to get one to try it with small action cameras for streaming. It comes with 2 different mounting methods that work really well. The stand is stable enough that it doesn't shift with vibrations of loud drumkits and people jumping, and kept the camera angle perfect for a couple of weeks now.

I can see it working well even with slightly heavier mics, but not with super heavy mics.

As per other reviews, the ratchet system used to set the stand angle and height is not the best, but still perfectly functional. If you have an heavy mic you might want to keep an hand on it when you unscrew the ratchet-like screw otherwise it might fall quicker than you anticipate.

Cable included is not super high quality but it's perfectly usable, despite what other reviews say. I wouldn't trust it on a stage or busy studio environments but it's meant to be installed (as it's inside the stand) so really not much of an issue there. I really doubt the other reviews that claims that that the cable sounds *bad*.
1
0
Reportar a crítica

Reportar a crítica