Hicon HI-J35S-Screw-M

246

3.5 mm Stereo Jack Socket

  • Gold-plated
  • Screw-on with union thread
  • Black metal housing
  • Suitable for Sennheiser ew bodypacks, among others
  • Suitable cable strain relief: Article no. 413018 (not included)
Disponível desde Janeiro 2014
número de artigo 331666
unidade de venda 1 peça(s)
Build In No
Type TRS (stereo/sym.)
angled No
€ 4,90
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Quarta, 20.03.
1

246 Avaliações de clientes

4.5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

105 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Dd
Great for Sennheiser wireless transmitters
David dP 14.03.2014
I chose this plug to build a custom cable for my Sennheiser Evolution G1 transmitter, to replace my low quality original Sennheiser moulded cable that had gone dead.

It is a high quality plug, and it works great with the Sennheiser unit (no noise when shaking it).

Only drawback is that it only takes cables up to 5.7mm diameter. So I had to work around this limitation to use the Sommer The Spirit cable (8mm dia.) that I also ordered. Nothing an appropriate quantity of hot-shrinkable sleeve won't solve... Add a Neutrik 6.35mm plug in the mix, and get your sound back, wireless !!
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
s
Good quality, imperfect design
sergio_logic 14.03.2024
Very good materials, very good construction, but at least for Sony UWP-D the thread of the locking nut is a bit too long.
Even when fully screwed in, while the threaded nut does not move one bit, the part with the plug may rotate freely in the jack and may move in and out by about half a millimeter. The jack of the original Sony UWP microphones does not move or rotate when the thread is fully screwed.
I cannot comment about Sennheiser, maybe they have better compatibility there, but for Sony UWP bodypacks this is less than ideal.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Special mini-jack
Anónimo 25.01.2016
Great quality connector with traditional solder tabs. Aside from the screw thread, what makes these special is that they aren't tapered at the cable end at all, and therefore will accept cables of up to 6mm outside diameter (6,8mm for the female version) without having to drill them -- but you'll need to get creative for the crimp tabs to work. When combined with HI-J35S-SCREW-F, these can be used to make extremely rugged stereo/balanced extension cables that will run great lengths and not ever come apart.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A(
excellent quality to price ratio
Andrea (Sona service from Italy) 17.04.2018
Bought a couple for two headset mics with mini-XLR connectors that I wanted to modify and use with my Sennheiser XSW systems. Really reliable, resistant and sturdy, at a lower price than that of the original brand's offering
acabamento
0
0
Reportar a crítica

Reportar a crítica