Göldo Back Box

The BackboxSmall, but fine auxiliary device to press back a vibrato to its original position

  • For vintage tremolo
  • In order to maintain guitar in tune

Estas são outras escolhas de clientes:

Os clientes que viram este artigo adquiriram os seguintes:

Göldo Back Box
38% compraram este artigo
Göldo Back Box
Disponibilidade imediata
Disponibilidade imediata

Este artigo encontra-se em stock e pode ser enviado imediatemente.

Informações sobre o envio
€ 19,90 Para a cesta de mercadoria
Göldo WS045 Fretboard Guard
7% compraram Göldo WS045 Fretboard Guard € 2,98
Thomann Fret File
4% compraram Thomann Fret File € 19,90
Göldo EL90X Cable
4% compraram Göldo EL90X Cable € 1,50
Göldo Fret Polishing Rubber
4% compraram Göldo Fret Polishing Rubber € 13,90
Os nossos mais populares Outras peças sobresselentes
418 Classificações de clientes:
  • 5
  • 4
  • 3
  • 2
  • 1
4.4 /5
  • acabamento
Total
acabamento
Excelente qualidade
05.11.2016
Instalei numa guitarra com sistema looking tremolo e em duas Fender Stratocasters com tremolos normais. Funcionou muito bem. Não traz instruções detalhadas de instalação, mas é possível encontrar na internet. Se for instalado como deve ser faz exatamente o que tem que fazer e funciona. Recomendo! excelente relação preço qualidade
Útil · Não útil · Reportar a crítica
Denunciar classificação…

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável?

Reportar
gb Traduzido automaticamente (Mostrar original)
gbReview original (Mostrar tradução)
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Total
acabamento
Works good but has poor quality
Branko O., 01.02.2015
For a while I wanted to try some tremolo stabilizer, even before I went installing Lo Pro Edge tremolo. Initially I wanted to install SuperVee MagLok, but from what I have seen online it seems it does not help tremolo return to zero point after pull-up. It can keep other strings from detuning when one string is bent, but nobody talked about zero point. Situation with BackBox is different and this was talked about. So I went for BackBox and it was a good decision. I had to deploy some workarounds to make it work, but in the end it works. It does help with detuning and also with zero point. Actual level of improvement depends on how tight tremolo springs are, and also how tight BackBox springs are. In other words - there are compromises. If one uses very tight configuration (maybe even stronger springs than stock) then yes, BackBox helps detuning to a point where it is not audible. However, tremolo is very stiff then. This was not a satisfactory situation for me so I decided to go with lighter configuration. I adjusted less tension in BackBox and also less tension in tremolo springs. This resulted with:

1. Tremolo being just a bit stiffer than usual
2. Detuning while bending is still happening and is still audible but less than before (on average 3 cents on tuner instead of 6-7 that were before)
3. Return to zero point after pull-up is much better and pitch change is not audible anymore (on average less than 2 cents on tuner instead of 4 that were before)
4. It also seems to me that the sound is slightly brighter and has more high frequencies than before

Note that my tuner has 13 cents between each half-note (E and F, F and F#, etc).

And yes, no matter how I set it up (lighter or tighter), flutters are gone. But I don't do that anyways so it's not something I would miss.

So that is what BackBox has to offer on an Ibanez S370 with Lo Pro Edge tremolo. I do not understand some folks out there saying it works perfectly for a Floyd Rose type of tremolo. In my case, one has to make it very stiff in order to get perfect operation. I don't know why is that so, maybe it has something to do with S series that has thinner body than other guitars. Or maybe it is just that those folks neglect to say it ends up being stiff and hard to operate because that doesn't bother them. Or maybe BackBox works better on standard tremolos - after all it is advertised with standard tremolos in mind. I don't know, I am just sharing my observations here.

As for the workarounds - they are needed because of the poor quality. At least I got two units that were of poor quality. First sign of the poor quality was that the stop sliders were hard to move even when the BlackBox springs was completely loose. If I rotated it to the right point, suddenly the movement improved and it was almost was free without any hassle. Reason is that the slider and the long screw are not completely straight so in certain positions slider has much resistance when going through the housing. Only one position has almost free movement. Second sign of poor quality was that the felt on top of the slider fell of from one unit. I used super glue to cure this. Third sign of the poor quality was that the chrome coating started to fall of the slider after use. BackBox is made of brass, and it has chrome coating. This coating started to fall of the slider immediately, even before installing

This poor quality rendered the BlackBox virtually inoperable. I could only make it work in very stiff setup and that was not an option. There were noises coming out when doing pull-ups. BlackBox tightening nut was rotating on pull-ups. Very bad. But I managed to get around these obstacles. I used sand paper to remove coating from slider and the inside of the housing where there is contact with the slider. I also used teflon based lubrication on the slider. Upon installation I rotated the sliders to the spot with least resistance.

And the result is very good! No more strange noises coming out. No more nut rotation. BlackBox works in lighter tension and does a good job as described earlier. If you would like to see more on this subject please check out my blog post:
Útil · Não útil · Reportar a crítica
Denunciar classificação…

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável?

Reportar
€ 19,90
Inclui IVA e não incluí € 20 portes de envio
Disponibilidade imediata
Disponibilidade imediata

Este artigo encontra-se em stock e pode ser enviado imediatemente.

Informações sobre o envio
Partilhe este produto
O seu contacto
Tel: +49-9546-9223-20
Fax: +49-9546-9223-24
Guias online
Guitar Accessories
Guitar Accessories
We investigate some of the many accessories available for both guitar and bass.
 
 
 
 
 
Resultado do teste:
Todos os preços são apresentados com IVA português, à taxa em vigor e válidos até ruptura do stock. Os portes de envio para Portugal continental têm o valor de 20,-EUR. Para encomendas de valor igual ou superior a 199,-EUR os portes de envio serão gratuitos. Para mais informações sobre o envio e entregas para outros locais, por favor clique aqui. Não assumimos responsabilidade por eventuais erros tipográficos ou informação imprecisa de qualquer tipo. *UVP = Preço de venda recomendado pelo fabricante / distribuidor para venda na Alemanha.
(4)
Vistos recentemente
Behringer CAT

Analogue Synthesiser VCO 1 with 4 miscible waveforms (sawtooth, triangle, pulse and suboctave), Pulse width modulation and two adjustable modulation sources, VCO 2 with 3 mixable waveforms (sawtooth triangle and suboctave) and two adjustable modulation sources, Low pass filter...

Vistos recentemente
Adam T8V

Adam T8V; Active Nearfield Monitor; 8" Woofer; 1.9" U-ART Accelerated Ribbon Tweeter; 2x Class-D Amp: 70 Watts RMS Woofer, 20 Watts RMS Tweeter; Frequency Range: 33 Hz - 25 kHz; Crossover Frequency: 2.6 kHz; max. SPL: 118 dB (1m /...

Vistos recentemente
K&M 80310

K&M 80310 disinfectant stand with bracket; bottle holder dimensions: 102 x 91 mm; base diameter: 275 mm; drip cup can be removed for cleaning; with bracket to fix the disinfectant bottle ; round base; weight: 3,6 kg; colour: pure white;...

(2)
Vistos recentemente
iZotope Music Maker's Bundle

iZotope Music Maker's Bundle (ESD); Plugin-Bundle; contains eight essential tools for audio editing and creative music production; consists of BreakTweaker Exp, Stutter Edit, Trash 2, Iris 2, Elements Suite (Nectar Elements, Neutron Elements, Ozone Elements und RX Elements); supported formats...

Vistos recentemente
Rode Wireless GO White

Rode Wireless GO White; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20...

Vistos recentemente
Rode Lavalier GO White

Rode Lavalier GO White; Lavalier Microphone; pairs perfectly with Røde Wireless GO (item 463781); works with most other devices with a 3.5mm TRS microphone input; compatible with most laptops, DSLR cameras, mobile recorders etc.; broadcast grade omnidirectional condensor capsule; Frequency...

(1)
Vistos recentemente
Presonus ioStation 24c

Audio Interface and Controller 2 x 2 USB 2.0 (USB C) recording interface with 24-bit / 192 kHz, 2 x Mic / Line / Instrument XLR combo input jacks, 2 x Line output 6.3 mm jack symmetrical, Stereo headphone...

Vistos recentemente
Yamaha PSR-E273

Yamaha PSR-E273 Keyboard - 61x keys, 384 sounds + 17 drum/SFX kits, 143 preset styles, 112 internal songs, 32-note polyphony, Effects: Reverb, Chorus, Ultra-Wide Stereo, Master EQ; One Touch Setting, Metronome, Transpose, duo function, connection: AUX In (Stereo-mini), headphone, Sustain...

(1)
Vistos recentemente
Behringer Eurorack Go

Behringer Eurorack Go; Eurorack case; two rows with 140 HP each, build-in busboard with 32 headers for Eurorack modules;, vertical positioning possible via integrated tilt stand; 96 sliding nuts (M3) pre-installed; maximum module depth: 40mm (lower row), 62mm (upper row);...

(1)
Vistos recentemente
Mackie CR3-X

Multimedia Monitors Equipped with a 3" woofer and a 0.75" tweeter, Power: 50 W, Frequency range: 80 - 20,000 Hz (-3 dB), Housing: MDF, Power supply: 100 - 240 V AC, 50/60 Hz, Dimensions (W x H x D):...

(1)
Vistos recentemente
K&M 80320

K&M 80320 Disinfectant stand for Euro dispenser; base diameter: 275 mm; round base; drip cup can be removed for cleaning; two different drilling patterns, so Euro dispensers for 350/500 ml and 1,000 ml containers can be attached; weight: 4,1kg; colour:...

Vistos recentemente
Saramonic Blink 500 B4

Saramonic Blink 500 B4; Ultracompact 2.4GHz Dual-Channel Wireless Microphone System with 2 transmitter and Lavalier for Apple iPhone and iPad that provides broadcast-quality sound; The RXDi battery-free MFi certified Lightning receiver is extremely lightweight, space efficient and works perfectly when...

Diga-nos o que pensa
Feedback Encontrou um erro ou pretende dar-nos a sua opinião sobre esta página?

Estamos ansiosos pelo seu contacto e ajudaremos na resolução de qualquer problema o mais rápidamente que pudermos