Doepfer A-160-5 Vintage Edition

10

Voltage Controlled Clock Multiplier

  • Multiplication factor can be controlled by control voltage or a regulator
  • Black front panel
  • Width: 4 HP
  • Depth: 35 mm
  • Power requirements: +50 mA (+12 V) / -0 mA (-12 V)
Disponível desde Abril 2016
número de artigo 383660
unidade de venda 1 peça(s)
Width 4 TE / HP
€ 111
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Sexta, 26.04.
1

10 Avaliações de clientes

4.9 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

acabamento

9 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Another brilliant utility from Doepfer
Stephen662 19.08.2015
This is a really useful module for enhancing the rhythmic possibilities of your euro-rack system. Great for generating snare or tom type rolls as well as making previously straight 16th sequences more complex by adding extra steps and skips. Also fun to trigger envelope-vca to apply complex pulses to your audio. Many uses.

The A-160-5 is only 4hp wide, so if your looking for a bit of clock fun in not much room it is a good option.

There are other multipliers out there - this by Doepfer is a bit different, as it offers 3 unique types of multiplication (all 3 going to a max of x 16), selectable by a simple toggle switch. In addition the the amount of multiplication can be set with the front panel knob or controlled by a voltage.

This means, you can either wiggle the knob to adjust the multiplications as desired, or more interestingly, send a sequencer, envelope or LFO voltage to get the multiplications dancing around. When the control voltage is inserted the knob has no function - so you may want to use an attenuator when cv-ing from a envelope or LFO.

I have deducted 1 star on the features because of this (the knob could have been made to perform this function when under cv control IMHO)

There are LED's for the input clock and multiplied clock output, so you get a visual representation of what's happening.

A point to note if you have not used a multiplier before... it can not predict the future! So, it needs a few established clocks before it can accurately spit out the multiplied clocks correctly. Obviously it also needs the clocks to be regular in order to perform accurate multiplication.

Great fun and as usual for Doepfer, great value and solid build quality.
1
0
Reportar a crítica

Reportar a crítica