Doepfer A-110-2

29

Basic VCO for the A-100 modular system

  • Voltage controlled oscillator
  • 3-Position toggle switch
  • Linear FM input and soft-sync input
  • Tune control range can be set between approx. 1/2 octave and 4 octaves via a jumper
  • Width: 8 HP / 40.3 mm
  • Depth: 50 mm (measured from the rear of the front panel)
  • Power requirements: + 12V: 150 mA (warm up period about 30 seconds), 60 mA (continuous operation) -12V: 30mA
Disponível desde Dezembro 2014
número de artigo 354853
unidade de venda 1 peça(s)
Analog Yes
Digital No
Width 8 TE / HP
variants Doepfer
€ 126
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Sexta, 19.04.
1

29 Avaliações de clientes

4.6 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

acabamento

15 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
High quality, and surprising differences from A-110-1
Anónimo 18.12.2015
The A-110-2 Basic Oscillator is a great-sounding oscillator, with interesting additions to the A-110-1 Standard Oscillator. While the -1 has a 5-position switch for octave, the -2 has only 3 positions. The -2 also sacrifices the sine output from the -1.

While the -1 has linear FM (i.e. a second 1V/Oct CV input with an attenuator), the -2 also has exponential FM. And while the -1 has a sync input, the -2 has both hard and soft sync inputs. The -2 has only one input for pulse width - but that seems like a reasonable sacrifice for the other features.

I find that the A-110-2 doesn't track as well as the A-110-1 in high ranges, and the sound is a bit "grittier" than the A-110-1. I actually like the square wave output of the -2 better than that of the -1, and since I have two of each, I tend to use them together to add texture to patches.

All in all, for the small price savings and the 2HP difference in width, I would tend to buy the -1 first - but I would buy a -2 to go with it, too.
4
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
KZ
Excellent !!
Kamil Z. 16.05.2016
Really great VCO it complements the Standard more expensive VCO very well. the soft sync is a must and differs a lot from hard sync, be careful though this unit is rather higly tuned and 0 pos does not correspond to 0 on the standard VCO, you can tune it down 2 octaves so no issues but will remain 1 octave above the lowest setting of the standard 110.

Higly recommended.
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Good compact VCO
Anónimo 15.03.2016
Affordable and compact which is good if rack space is a concern. I use it as an addition to my Arturia Microbrute but it sounds great even on its own with a few effects.
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
O
..is doepfer
Oskars 30.12.2016
Great features. Solid sound. Not a very shallow module.
0
0
Reportar a crítica

Reportar a crítica